Inhaltszusammenfassung zur Seite Nr. 1
HD-Ready Widescreen LCD TV with Digital Tuner
Inhaltszusammenfassung zur Seite Nr. 2
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To fi nd out how to properly dispose of this product, please go to www.polaroid.com and
Inhaltszusammenfassung zur Seite Nr. 3
ENGLISH ENGLISH FCC Federal Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
Inhaltszusammenfassung zur Seite Nr. 4
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualifi ed service personnel. WARNING This symbol is i
Inhaltszusammenfassung zur Seite Nr. 5
ENGLISH ENGLISH Warnings and Precautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or mois
Inhaltszusammenfassung zur Seite Nr. 6
Warnings and Precautions Outdoor Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪ When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs. Section 810 o
Inhaltszusammenfassung zur Seite Nr. 7
ENGLISH ENGLISH TABLE OF CONTENTS Preparation Important Safety Instructions .............................................................................. 1 Antenna Safety Instructions .................................................................................4 Chapter 1 Introducing the LCD TV Package Contents..................................................................................................6 Setting Your LCD TV............................
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 1 Introducing the LCD TV Package Contents Make sure all of the following contents are included. LCD TV Remote Control/ VIDEO Cable Component Cable AAA Batteries x 2 POWER CH LIST SUBTITLE GUIDE SLEEP ATV DTV VOL CH INPUT EXIT MENU OK INFO P MODE Power Cord AUDIO Cable Warranty Card User’s Manual Quick Start Guide These items are all you need to set up and operate the LCD TV in its basic confi guration. Make sure all of the above contents are included in the package. If you are
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH Chapter 1 Introducing the LCD TV Setting Up Your LCD TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: Stand LCD TV Cover an even stable surface with a soft cloth. Place the LCD TV unit face- down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown: Then push until the stand clicks into the LCD TV’s stand socket. To Remove the LCD TV’s stand
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Introducing the LCD TV How to setup the TV Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page 15-18). Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Insert the 2 batteries supplied in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH Chapter 1 Introducing the LCD TV Your LCD TV Front/Left /Right Side View and Controls Front View Right Side View Left Side View IR Infrared Receiver LED The LED light indicates when the LCD TV is activated. HEADPHONE VOLUME+- Connects to the external Adjusts the volume up and down. VOL.+ headphone for private listening. Selects the main-menu item and change values for items when in the OSD mode. VOL.- CHANNEL ▲▼ Scans up and down through channels. CH. Selects sub-menu item when in
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 1 Introducing the LCD TV Rear View and Jacks 1 6 5 7 PC/VGA IN VHF/UHF IN 8 9 4 3 2 ITEM DESCRIPTION Connects the AC power cord to this socket./ Make sure 1 AC IN / Power Switch that this switch is in the ON position (Red LED light will show on the bottom centre of the TV). Connect to external equipment with scart socket. This 2 AV1 scart input allows audio and CVBS/YC/RGB+CVBS. SCART RGB,S-VIDEO from an external devise to be shown on your TV. 3 AV2 Connects to the S- VIDEO out
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH Chapter 1 Introducing the LCD TV Your Remote Control 1 POWER POWER Turns the LCD TV on and into standby mode . 11 1 CH LIST 2 2 Mutes and restores your LCD TV sound. SUBTITLE 9 3 ATV/DTV Pressing enter ATV (analogue) or Digital (DTV) Mode. 10 4 0-9 Select and switch to a channel by using 0-9 buttons. 4 5 GUIDE In DTV mode,pressing GUIDE key displays the electronic program guide on the screen. GUIDE SLEEP 5 8 ATV DTV 3 6 CH. +/- Changes the channels up and down . VOL CH 7 6 INPUT V
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 Installing the LCD TV 14 15 OK ▲▼◄ ► POWER CH LIST SUBTITLE INFO 16 Pressing once displays a variety of information such as the current channel and the input source. 17 INPUT Cycles among the diff erent input signal INPUT: TV AV1(SCART) AV2(S-VIDEO) AV3(CVBS) AV4(Y Pb Pr) AV5(VGA) AV6(HDMI) DTV 18 GUIDE SLEEP ATV DTV VOL CH INPUT EXIT MENU 14 OK INFO P MODE 29 Accesses the TELETEXT items or corresponding pages. The coloured buttons are used to access
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twin- lead cable 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner 300-ohm twin- (not included) lead cable IN OUT 75-ohm VHF coaxial cabl
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH Chapter 2 Installing the LCD TV Cable TV (CATV) Connection This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF,
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 Installing the LCD TV Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal. 1 VHF/UHF IN Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. 2 Press the POWER button on your remote to turn on your LCD TV. 3 a. After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the front centre panel
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH Chapter 2 Installing the LCD TV Connecting a DVD Player Rear of TV PC/VGA IN VHF/UHF IN Audio Audio Video Pb Pr (R L) ) ( A Video/Audio Cable D DVDPLAYER METHOD A (AV4 ) Use a Component cable to connect the (Y Pb Pr ) sockets on the DVD player to your LCD TV. Use an audio cable to connect the DVD’s audio sockets to your LCD TV. METHOD B (AV2) Use an Audio cable to connect the DVD’s audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and DVD player. METHOD C
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 Installing the LCD TV Connecting a VCR&Video Camera Rear of TV PC/VGA IN VHF/UHF IN Audio Audio Video (L) ) (R Video/Audio Cable METHOD A (AV2) Use an Audio cable to connect the VCR’s/ the Video Camera’s audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and VCR player/ video camera. METHOD B (AV3) Use an A/V cable to connect the VCR’s/ video camera’s composite output sockets to your LCD TV. METHOD C (AV1) Use a SCART cable to connect the VCR’s SCART soc
