Bedienungsanleitung ATD Tools ATD-5020

Inhaltszusammenfassung zur Seite Nr. 1

 
ATD‐5020 
High Flow Rotary Hand Pump 
Instructions 
 
 
 
 
 
• Effortless rotary action dispenses up to 55 Gal. in 3 Min.  
• Ideal for use where volume fuel dispensing is needed: Automotive Repair Shops, Body Shops, Construction Sites, 
Workshops, Marine, Agricultural & Aviation  
• 3:1 discharge ‐ (3) rotor turns for every rotation of the handle  
• Heavy‐duty, die cast aluminum construction with sintered gear driven die cast Zinc rotor & vanes  
• 6 ft. delivery hose with metal nozzle  
•

Inhaltszusammenfassung zur Seite Nr. 2

Features: 1. Geared Rotary barrel pump with 3 times discharge per rotation. For every complete handle turn, the rotor turns 3 times 2. Compact design, Ideal for use where volume fuel dispensing is needed, such as construction sites, workshop, aviation, farms/ ranches, boat etc. 3. Professional Die Cast Aluminum construction with Die Cast Zinc rotor & vanes 4. Non wearing sintered gears 5. Crank Shaft mounted on ball bearings 6. Die Cast Aluminum handle with security locking latch 7.

Inhaltszusammenfassung zur Seite Nr. 3

7. Once the bottom of the suction tube touches the base of the drum, securely fasten the bung onto the drum. Now tighten the bung onto the suction tube 8. When using the pump for the first time or after an extended period of time or using the pump to lift Fuels/ Low viscosity Media; make sure to Prime before use. To Prime, POUR 30 ML OF MEDIA BEING PUMPED/ OIL INTO THE PUMP OUTLET. RAPIDLY ROTATE THE PUMP HANDLE TILL PUMP STARTS DISPENSING. In everyday use, it may take about 10 rotations of