Bedienungsanleitung Samsung LW22A13W

Inhaltszusammenfassung zur Seite Nr. 1

01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Page 5
Viewing the Connection Panel

Option

Power Input
Whenever you connect an audio or video system to your set,
ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety precautions.
English-1

Inhaltszusammenfassung zur Seite Nr. 2

01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Page 6 Viewing the Connection Panel Connecting an Aerial or Cable Television Network (depending on the model) To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting a Set-Top Box, VCR, or DVD - Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD. - If you wish to connect both the Set-Top Box

Inhaltszusammenfassung zur Seite Nr. 3

01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Page 7 Viewing the Connection Panel Connecting a DVD Player or Set-Top Box to the TV with a DVI-D Cable - Connect a DVI-D cable between the DVI-I INPUT connector on the TV and the DVI connector on the DVD player/Set-Top BOX. - Connect a set of audio cables between the PC AUDIO INPUT jack on the TV and the AUDIO OUTPUT jacks on the DVD player/ Set-Top BOX. If you are using a DVI-D cable to connect Be sure to connect the audio cable (sold separately) as s

Inhaltszusammenfassung zur Seite Nr. 4

04-BN68-00574C-00Eng.qxd 2/17/04 2:43 AM Page 61 How to connect the cables and stand base Remove the cover as shown in Connect the cables as shown in 1 2 the picture. the picture. Replace the cover. Attach the stand to the 3 4 TV set as shown in the picture. Note : The curved side of the stand base should be placed at the back of the TV set as shown in the above figure. Do NOT lift the TV set by the stand. The stand is not screwed to the TV set and lifting the set by the stand may cause injur