Inhaltszusammenfassung zur Seite Nr. 1
42pb120S4-en 2/07/04 11:32 Page 1
Table of contents
Important safety instructions 2
Warnings and precautions 2
Installation 3
Care and maintenance 3
Trademarks 3
Compliance with CE standards 3
Package contents 4
Understanding your set 5
Front panel 5 EN
1
Remote control 6
Using the remote control for other equipment 7
Programming the remote control 8
Switching on 9
Channel set-up 10
Initial set-up 10
Manual installation 12
General operation 13
Switching the set on and off 13
Volume 13
Display
Inhaltszusammenfassung zur Seite Nr. 2
42pb120S4-en 2/07/04 11:32 Page 2 Important safety instructions Warnings and precautions Ensure that your domestic mains supply voltage Even when off, some components remain in contact matches the voltage indicated on the identification with the mains electricity supply.To completely isolate label located at the back of the set. the set you must remove the plug from the mains supply socket. The TV set’s components are sensitive to heat.The maximum ambient temperature should not exceed 3
Inhaltszusammenfassung zur Seite Nr. 3
42pb120S4-en 2/07/04 11:32 Page 3 Important safety instructions Installation Care and maintenance Install the TV set in a properly ventilated room. Always disconnect the TV set from the mains supply before any cleaning operation. Clean the screen with a Do not install this product on an unstable cart, stand glass-cleaning product. Never use abrasive products. or table. Clean the front and cabinet using a soft cloth Do not place it on a bed, sofa, rug, or other similar impregnated wi
Inhaltszusammenfassung zur Seite Nr. 4
- + + - 42PB120S4 Manuel d’utilisation Bedienungsanleitung Manuale di utilizzazione User manual Manual de utilización GREENELL EXTRA HEAVY DUTY SIZE AAA 1,5 V 0%MERCURY 42pb120S4-en 2/07/04 11:32 Page 4 Package contents Remote control with batteries TV set EN 4 Power cord User manual Optional accessory You can purchase from your local sales representative an optional wall mount under the following reference:ACC913. GREENELL EXTRA HEAVY DUTY SIZE AAA 1,5 V 0%M
Inhaltszusammenfassung zur Seite Nr. 5
42pb120S4-en 2/07/04 11:32 Page 5 Understanding your set Front panel EN 5 Power (standby) button Menu On / standby To access the menus. +/- Status light To control the volume. Horizontal scrolling in menus. Off When the TV set is connected to the mains, and the PR+/- main power switch on the rear panel is on the OFF To change channels. position, the light is off. Vertical scrolling in menus. Orange When the TV set is connected to the mains and the main power switch is on the ON position, but
Inhaltszusammenfassung zur Seite Nr. 6
42pb120S4-en 2/07/04 11:32 Page 6 Remote control Most of your television’s functions are Standby / quit standby. available via the menus that appear on the TV To access TV mode. screen.The remote control supplied with Press this button to control the television. your set can be used to navigate through the menus and to configure all the general To access VCR mode. VCR settings. To access DVD mode. DVD SAT To access SAT mode. AUX To access AUX mode. AMP To access AMP mode. EN light To provide
Inhaltszusammenfassung zur Seite Nr. 7
42pb120S4-en 2/07/04 11:32 Page 7 Remote control Using the remote control for other equipment The remote control supplied with your television can be used to control other appliances using the programmable buttons VCR, DVD, SAT, AMP and AUX.For each button you can control the following appliances: VCR: video recorder DVD:DVD player SAT: satellite receiver, cable network AMP: hi-fi system, Home Cinema amplifier AUX:any appliance. For instance, if you have two video recorders, you can program t
Inhaltszusammenfassung zur Seite Nr. 8
42pb120S4-en 2/07/04 11:32 Page 8 Remote control Programming the remote control Automatic code search Manual programming This method can be used to automatically find the most This method involves carrying out a manual search for appropriate code for your appliance. the codes to be used for controlling your other appliance. 1. Switch on the appliance you wish to use the remote control with. 1. Switch on the appliance you wish to use the remote control with. 2. Press the relevant button for th
Inhaltszusammenfassung zur Seite Nr. 9
42pb120S4-en 2/07/04 11:32 Page 9 Switching on Follow the instructions on this page to switch on the TV set and the remote control. 1. Install two LR06 or AA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat, throw them on the fire, recharge them or try to open them, as this could
Inhaltszusammenfassung zur Seite Nr. 10
42pb120S4-en 2/07/04 11:32 Page 10 Channel set-up Initial set-up The initial set-up involves setting all the parameters required to be able to search and store all the channels you can receive in your area. Make English Français sure that the TV set is switched on and follow steps 1 to 4.When you Deutsch first switch the TV set on, the language selection menu appears. If this Italiano does not happen, refer to the Manual installation section to find out Español how to carry out an automatic s
Inhaltszusammenfassung zur Seite Nr. 11
42pb120S4-en 2/07/04 11:32 Page 11 Channel set-up 4. At the end of the auto installation process, the ORGANIZER menu appears to allow you to modify the order of channels, to name or ORGANIZER rename channels, or delete channels stored twice or with poor Return reception quality. Use a TV programme magazine and the channel Select PR 02 logos to identify the various channels. Swap with PR: -- Change name BBC2 Note:The ORGANIZER menu is also accessible from the INSTALLATION Delete PR
Inhaltszusammenfassung zur Seite Nr. 12
42pb120S4-en 2/07/04 11:32 Page 12 Channel set-up Manual installation You may want to to carry out a manual installation in case some INSTALLATION channels have not been stored during the initial set-up. Setting up Return channels manually requires every setting to be entered, one at a time.To Manual installation carry out a manual installation, display the OVERVIEW menu using the Auto installation Organizer MENU button and select the Installation option. Press OK to confirm. In the INSTALLAT
Inhaltszusammenfassung zur Seite Nr. 13
42pb120S4-en 2/07/04 11:32 Page 13 General operation Switching the set on and off To switch the TV set on, put the main power switch located at the rear on the ON position, then press the power button located on the front panel.When the set is on, the light on the front is green. Standby mode: press the power button on the front panel.When the TV set is in standby mode, the light on the front is orange. Volume Volume control: use the buttons on the front panel or the remote EN control to incr
Inhaltszusammenfassung zur Seite Nr. 14
42pb120S4-en 2/07/04 11:32 Page 14 Adjusting the picture Display the OVERVIEW menu using the MENU button. Select Picture and press OK to confirm.The PICTURE menu appears. The contents of this menu depends on the signal. In TV mode: PICTURE menu in TV mode Adjust the Brightness, Contrast, Colour and Sharpness settings as required. PICTURE The Tint option is only available when a NTSC signal is detected. It is Return used for adjusting the picture’s tint. EN Brightness Contrast To adju
Inhaltszusammenfassung zur Seite Nr. 15
42pb120S4-en 2/07/04 11:32 Page 15 Adjusting the sound Display the OVERVIEW menu using the MENU button. Select Sound and press OK to confirm.The SOUND menu appears, which offers the SOUND following settings: Return The Sound type option allows to select the relevant sound type. Use Sound type Stereo Bass the buttons to make a selection. Treble Balance The available options depend on the programme you are watching. Intern. speaker Audio output Fixed Broadcast Options Mono Mono,Autom
Inhaltszusammenfassung zur Seite Nr. 16
42pb120S4-en 2/07/04 11:32 Page 16 Picture in picture (PIP) The PIP area on the remote control is used for the PIP functions.These functions allow to view two programmes (one TV channel and one AV programme, or two AV programmes) at the same time in various ways.Press the PIP button to scroll the various display modes: PIP: a TV channel or AV programme is displayed in a frame in a corner of the screen. PAP: the screen is divided vertically in two and the second programme is displayed on the r
Inhaltszusammenfassung zur Seite Nr. 17
42pb120S4-en 2/07/04 11:32 Page 17 Other functions Sleep timer This function allows you to set an automatic shut-off time, from 0 to 4 hours, with 15-minute steps. Press the red button on the remote control to activate the sleep timer 3 : 4 5 function. - : - - A symbol appears on screen in front of the sleep time. If no timer has been set, then -:-- is displayed. Use the buttons to decrease/increase the duration. EN 17 Once the timer is set, pressing the red button displays the remain
Inhaltszusammenfassung zur Seite Nr. 18
42pb120S4-en 2/07/04 11:32 Page 18 Using the teletext The Teletext service is available in many countries under a variety of names (TOP Text, Fastext, FLOF test,Videotext). It is provided as a free service by some television broadcasters.This service provides a real wealth of information, available at any time, on weather, sports results, news, games, etc.The information is presented in pages or organised in topics specified in colour on the screen and you can access this information by simpl
Inhaltszusammenfassung zur Seite Nr. 19
42pb120S4-en 2/07/04 11:32 Page 19 Using the teletext Teletext offers some other useful functions: Newsflash When a newsflash is detected, PAT is replaced by N.Press the blue button to display the newsflash. In the case of an update,Teletext is automatically enabled and displays the new information. To display the header and the navigation bar again, press any button (except EXIT,the button or the volume adjustment buttons) on the remote control. EN This function is cancelled when you change
Inhaltszusammenfassung zur Seite Nr. 20
42pb120S4-en 2/07/04 11:32 Page 20 Connecting other equipment Connecting a DVD player Using SCART (AV) socket input AV1 AV2 1. Connect the SCART socket on the DVD player to a SCART socket (AV1 or AV2) on the rear panel of the set. Using component video input 1. Connect the green (Y), red (P /C ), and blue (P /C ) cinch sockets R R B B on the DVD player to the corresponding cinch sockets on the rear EN panel of the set. 20 2. Connect the red (R) and white (L) audio cinch sockets on the DVD pla
