Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Features ................................................................. 2 Electronic Programme Guide (EPG) .................... 14 Accessories ............................................................ 2 Displaying Subtitles .......................................... 14 Digital Teletext (** for UK only) ......................... 15 Introduction ............................................................. 2 Analogue Teletext ............................................. 15 Preparat
Inhaltszusammenfassung zur Seite Nr. 3
Features Accessories • Remote controlled colour LCD TV. • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high defi nition signals. • USB input. Batteries: 2 X AAA • 200 programmes from VHF, UHF(analogue). • 300 programmes for digital mode (IDTV). • On Screen Display (OSD) menu system. • Two scart sockets for external devices (such as video, vi
Inhaltszusammenfassung zur Seite Nr. 4
Batteries should not be exposed to excessive heat Safety Precautions such as sunshine, fi re or the like. Please read the following recommended safety Lightning precautions carefully for your safety. In case of storm and lightning or when Power Source going on holiday, disconnect the power The TV set should be operated only from a 220-240 cord from the wall outlet. V AC, 50 Hz outlet. Ensure that you select the correct Replacement Parts voltage setting for your convenience.
Inhaltszusammenfassung zur Seite Nr. 5
Headphone Volume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the scre
Inhaltszusammenfassung zur Seite Nr. 6
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set wil
Inhaltszusammenfassung zur Seite Nr. 7
Overview of the Remote Control 1. Standby 2. Yellow / Feature menu / Current language (*) (in DTV mode) 3. Blue / Install menu / Favourite mode (*) (in DTV mode) 4. PIP / PAP mode 5. Guide (in DTV mode) 6. Sleep timer 7. Subtitle on-off / TXT subtitle 8. Numeric buttons 9. TV – Digital TV mode 10. Volume up 11. Programme up / Page down (in DTV mode) 12. AV / Source selection 13. Info / Reveal (in TXT mode) 14. Return / Exit (in DTV mode) / Index page (in TXT
Inhaltszusammenfassung zur Seite Nr. 8
LCD TV and Operating Buttons 1. Standby button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” / “ ” buttons at the same time to view main menu. V iewing the Connections- Back Connectors 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital optic cable to transfer audio signals to a device that has S/PDIF input. 2. Subwoofer Out is for connecting an external, active subwoofer to the set to give
Inhaltszusammenfassung zur Seite Nr. 9
4. SCART 2 inputs or outputs for external devices. 5. SCART 1 inputs or outputs for external devices. Connect the SCART cable between SCART sockets on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player). Note: If an external device is connected via the SCART sockets, the TV will automatically switch to AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless manually selected. Note: You should conn
Inhaltszusammenfassung zur Seite Nr. 10
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. 2. Side USB input . Note: Codec update cannot be performed. 3. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional). 4. Video Input is used for connecting video signals of
Inhaltszusammenfassung zur Seite Nr. 11
Using Digital Multimedia Connectors • You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play JPG and MP3 fi les stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. • You may back up your fi les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be respo
Inhaltszusammenfassung zur Seite Nr. 12
Using Side AV Connectors Connecting Other Equipment via Y ou can connect a range of optional equipment Scart to your LCD TV. Possible connections are shown Most devices support SCART connection. You can below. Note that cables shown in the illustration are connect a; DVD recorder, a VCR or a decoder to your not supplied. LCD TV by using the SCART sockets. Note that cables • For connecting a camcorder, connect to the VIDEO shown in the illustration are not supplied. IN socket a
Inhaltszusammenfassung zur Seite Nr. 13
Switching the TV On/Off Basic Operations Y ou can operate your TV using both the remote To Switch the TV On control and onset buttons. • Connect the power cord to the 220-240V AC, 50 Hz. Operation with the Buttons on the TV • Press STANDBY switch. Then the standby LED V olume Setting lights up. • Press “ ” button to decrease volume or “ • To switch on the TV from standby mode either: ” button to increase volume, so a volume level scale (slider) will be displayed on the screen
Inhaltszusammenfassung zur Seite Nr. 14
Initial Settings When the TV is turned on for the fi rst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the On Screen Display (OSD). By pressing the “ ” or “ ” buttons highlight the language you want to set and press OK button. After then, “First time installation” On Screen Display (OSD) will appear on the screen. After Automatic Search is completed, the fol
Inhaltszusammenfassung zur Seite Nr. 15
General Operation Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and its normal analogue broadcasting. Information Banner • Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV RED button (Shrink) : makes the info boxes mo
Inhaltszusammenfassung zur Seite Nr. 16
IDTV Menu System The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Press the “ ” button to turn IDTV on while the TV is in analogue mode. Press the “ M” button. The menu below appears on the screen: Digital T eletext (** for UK only) • Press the TELETEXT ( ) button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the d
Inhaltszusammenfassung zur Seite Nr. 17
• Press “ ” or “ ” buttons to select the “ Move ” item on Channel List menu. Now pressing “ ” or “ ” button moves to the previous/ next character. Pressing “ ” or “ ” button toggles Note : If you enter the same programme number of the the current character, i.e., ‘b’ character becomes ‘a’ channel that you want to move, “.... channel services by “ ” and ‘c’ by “ ”. Pressing the numeric buttons will be replaced. Do you want to continue?” On Screen ‘0...9’ replaces the highlight
Inhaltszusammenfassung zur Seite Nr. 18
Date: Starting date is entered via the Left/Right or the numeric buttons. Start : Starting time is entered via the Left/Right or the numeric buttons. End : Ending time is entered via the Left/Right or the numeric buttons. Duration: Duration between Start and End time. Repeat: You can set a timer to be repeated as Once, Daily or Weekly. Change/Delete : permits or prohibits any modi fi cations How to Add a Channel to a Favourites List for other users. • By pressing “ ” or “ ” buttons,
Inhaltszusammenfassung zur Seite Nr. 19
• To see the viewing contract information: enter IDTV; press the “ M ” button, then highlight Conditional Access and press the OK button. • When no module is inserted, “No Conditional Access module detected” message appears on the screen. • Refer to the module instruction manual for details of the settings. NOTE: Insert or remove the CI module only when the TV is in STAND-BY mode or SWITCHED OFF. Dolby D Digital (* for EU countries only) (Optional) TV Setup In the Configuration M
Inhaltszusammenfassung zur Seite Nr. 20
channels as well. If it is set as OFF manually, encrypted Parental Control channels will not be located while in automatic search Use “ ” or “ ” buttons to go to Parental Lock option. or manual search. Press OK button to enter the menu. A dialog box Use “ ” or “ ” button to select Scan Encrypted and asking for the lock key will be displayed. The key then press “ ” or “ ” button to set this setting as is set to “0000” initially. Enter PIN. If it is incorrect, On or Off. “Wrong Pin” On Scre
