Inhaltszusammenfassung zur Seite Nr. 1
®
ViewSonic
N3752w
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
®
ViewSonic
Model No. : VS11405-1M
Inhaltszusammenfassung zur Seite Nr. 2
Contents Compliance Information .................................................................................. 1 Important Safety Instructions .......................................................................... 2 Copyright Information ...................................................................................... 3 Product Registration ........................................................................................ 3 Antenna Installation Instructions ...................
Inhaltszusammenfassung zur Seite Nr. 3
Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7. Do not block any
Inhaltszusammenfassung zur Seite Nr. 5
Copyright Information ® Copyright © ViewSonic Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improveme
Inhaltszusammenfassung zur Seite Nr. 6
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started ® Congratulations on your purchase of a ViewSonic LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • LCD TV • Remote Control with batteries • Power Cord • RCA A/V Cable • VGA Cable • ViewSonic User Guide • Quick Start Guide Fixing ViewSonic LCD TV to the Wall The LCD TV can be wall-mounted or freestanding. Before installing the product to the wall, please consider the following guidelin
Inhaltszusammenfassung zur Seite Nr. 8
Front View of the Product Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. Menu Turn OSD menu ON/OFF. CH Down Channel down when source is at TV or select a control while in OSD menu. CH Up Channel up when source is at TV or select a control while in OSD menu. ENTER To highlight a control in OSD menu. Power ON/OFF button Power LED Indicator / Remote Control Receiver Manufactured
Inhaltszusammenfassung zur Seite Nr. 9
Rear View of the Product Power (AC input) Using power cord provided, connect to a power source. Air TV input Connect to NTSC or ATSC TV source. Cable TV input Connect to Cable TV (CATV) or Digital Cable. SPDIF Optical output Connect this port to the SPDIF input of A/V device. HDMI Input Terminal -3 Connect this port to the HDMI output of A/V device. HDMI Input Terminal -2 Connect this port to the HDMI output of A/V device. HDMI Input Terminal -1 Connect this port to the HDMI output of A/V device
Inhaltszusammenfassung zur Seite Nr. 10
Remote Control ViewSonic N3752w 8 ENGLISH
Inhaltszusammenfassung zur Seite Nr. 11
Remote control button function as follow A SOURCES Select input source PIP * PIP: activate PIP feature B PIP Source: change PIP source PIP Size: change PIP size 0~9, -/100 number button Input channel number C RECALL Return to previous channel D GUIDE Show electronic program guide (EPG) E F SLEEP * Set timer to turn off TV G CC Close Caption H VOL▲ and VOL▼ Adjust volume I MUTE Mute On/Off MTS/SAP Select Mono, Stereo or SAP sound J POWER Power On/Off K Device buttons Select desire device L M Zoom
Inhaltszusammenfassung zur Seite Nr. 12
Key “Defaults” The “default” out of box setting enables the Remote to control a predetermine TV, DVD,STB, VCR, VPB, WMA and AUD. • Depending on Device desire the following model will be active. Device Default Setting TV ViewSonic DVD Samsung STB RCA VCR Sony VPB ViewSonic WMA ViewSonic WMA-100 AUD Sony Note: Multiple pre-programmed codes are available for some devices; if default setting does not function, see pre-programmed table for additional codes. Resetting Remote • To reset remote
Inhaltszusammenfassung zur Seite Nr. 13
Basic Setup 1. Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2. Refer to the Pre-programmed code tables on page 13-18 and write down the code number listed. 3. Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-programmed code. LED will blink to indicate pre-programmed code was captured correctly. LED Device Buttons Pre-Programmed Code Notes Record the th
Inhaltszusammenfassung zur Seite Nr. 14
AUX Key Setup The AUX key is used to operate a second TV, DVD, STB, VCR, VPB,WMA, and AUD. A fourth digit is necessary to identify the type of device the key will control. AUX Button For example, to control a Sony DVD player with a code = 1 = 5 TV VPB of 027 under the AUX key, a 2 must be added in the DVD = 2 WMA = 6 beginning of the pre-programmed code making it 2027. If user wants to control a Philips STB with a 006 code STB = 3 AUD = 7 under the AUX key, a 3 must be added in the beginni
Inhaltszusammenfassung zur Seite Nr. 15
Pre-Programmed Code Tables ViewSonic LCD TV’s and Plasmas DVD Players-2 BRAND CODE Grundig 008, 009 N1700W 001 Harman Kardon 116 N1300 002 Hitachi 010, 054, 115 N1500 003 Irradio 137 N1750W 004 JVC 011, 039, 066, 069, 070, N2010 005 071, 072 N2010-E 006 Kenwood 031, 142, 145 N2700W 007 Koss 138 N2750W 008 LG 012, 040, 041 N3020W 009 Magnavox 077, 091 N3200W 010 Marantz 130 N3200W-E 011 Mem
Inhaltszusammenfassung zur Seite Nr. 16
Grundig 001, 006, 007, 015, 017, STB - Set Top Box 024 Hanseatic 018 BRAND CODE Hirschmann 015 Akai 019 Hisawa 016 Alba 005, 006, 007 Hitachi 006, 017, 053 Allsat 019 Hughes 053 Alphastar 057 Huth 010, 016 Amstrad 001 Intertronic 010 Ankaro 012 Janeil 052 Anttron 005 Johansson 016 Apollo 005 JVC 045 Armastrong 010 Kathrein 015, 019, 026 Asat 019 KR 007 Astra 010, 013 Kreiselmeyer 015 Astro 007, 008, 012, 015 Kyos
Inhaltszusammenfassung zur Seite Nr. 17
Quelle 015 Cable Radio Shack 048, 049 Radiola 019 BRAND CODE Radix 014 ABC 006, 067, 069, 105 RCA 000, 040, 041 Archer 072, 073 Realisitic 044 Cabletime 060 RFT 019 Contec 078 Saba 008, 017 Eastern 079 Sabre 006 France Telecom 061 Sagem 025 GE 066 Salora 013 Gemini 080, 081 Samsung 005, 035, 057 General Instrument 066, 107 Satcom 016, 018 Grundig 062 SatPartner 005, 007, 008, 016 Hamlin 082, 083, 084, 089, 106 Schneider 012, 021, 02
Inhaltszusammenfassung zur Seite Nr. 18
JC Penney 079, 085, 088, 090, VCR 117, 118, 119, 120 121, 122, 124, 125, BRAND CODE 128, 129, 130, 131, Action 102 136 Admiral 101, 144, 145 Jensen 128, 129, 139 Aiko 127 JVC 010, 011, 040, 043, Aiwa 005, 126 058, 087, 088, 117, Audiovox 122 118, 119, 139, 142 Bell & Howell 119
Inhaltszusammenfassung zur Seite Nr. 19
Symphonic 077, 095, 104, 126 Pentax 077, 088, 128, 129, Tandy 119 136, 141 Tashiko 122 Philips 022, 023, 024, 025, Tatung 139 026, 027, 076, 110, Teac 126, 139, 148 111, 124, 131, 133, Technics 124, 137 151 Teknika 090, 122, 124, 126 Pioneer 078, 103, 118, 128, Thomson 031, 032, 035, 036,
Inhaltszusammenfassung zur Seite Nr. 20
Thomson 015, 016 AUD Toshiba 036 Uher 013 BRAND CODE Yamaha 017, 018, 061, 072,077 Aiwa 024, 041, 063 Zenith 089 Akai 013 Bose 039 Carver 075 Curtis Mathes 065 Denon 001, 053, 054, 059, 076 Fisher 005, 066, 068, 073 GE 030 Goodmans 013 Gradiente 086 Harman Kardon 002, 025, 052, 070 Hitachi 003, 083 JBL 025 Jensen 085 Jerrold 026, 028 JVC 004, 050, 057 Kenwood 005, 055, 058, 072, 080 Luxman 088 Marantz 042 Mclntosh 082
