Inhaltszusammenfassung zur Seite Nr. 1
19" LCD TV
OWNER'S MANUAL
PLV3619-DVI 'Venturer'< Manual-English >
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER RISK OF ELECTRIC SHOCK DO NOT OPEN SERVICING TO QUALIFIED PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK RISQUE DE CHOC ÉLECTRIQUE NE AVIS PAS OUVRIR HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. The lightning flash with an arrowhead within a t
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 13.Unplug this apparatus during lightning storms or when unused for 2. Keep these instructions. long periods of time. 3. Heed all warnings. 14. Refer all servicing to qualified 4. Follow all instructions. service personnel. Servicing is 5. Do not use this apparatus near water. required when the apparatus has 6. Clean only with a dry cloth. been damaged in any way, such as 7. Do not block any ventilation power-supply cord or plug is openin
Inhaltszusammenfassung zur Seite Nr. 4
TABLE OF CONTENTS SAFETY PRECAUTIONS ...................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS .............................................................. 3 REMOTE CONTROL ........................................................................................... 5 ACCESSORIES ...................................................................................................... 5 REMOTE CONTROL REFERENCE GUIDE ......................
Inhaltszusammenfassung zur Seite Nr. 5
REMOTE CONTROL USING THE REMOTE CONTROL Point the remote control at the REMOTE SENSOR located on the unit. When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AAA” batteries. BATTERY REPLACEMENT When the batteries become weak, the operating dis
Inhaltszusammenfassung zur Seite Nr. 6
REMOTE CONTROL REFERENCE GUIDE 6) DISPLAY button Press to show which input you are 110 watching (TV Channel/AV/YUV/DVI/PC ). 2 7) SLEEP button Sets the SLEEP timer. The unit will remain ON for the time that is set, and will 3 automatically shut off afterwards. 8) CC button 11 Press to activate the Closed Captioning 12 feature. This function only works on 4 13 programs broadcasted with captions. 5 9) FORMAT button 14 6 Press to select the picture format. 10) STANDBY/ON button 7 15 Press to turn
Inhaltszusammenfassung zur Seite Nr. 7
UNIT REFERENCE GUIDE 1) Color LCD Screen 2) STANDBY indicator Indicates whether the unit is ON or in STANDBY (OFF) mode. Light On: The unit is in STANDBY. Light Off: The unit is turned ON. 1 Remote Control Sensor Do not block this sensor or remote control 2 will not work. 3) Removeable Stand 4) STANDBY/ON button 3 Turns the unit on and off. 5) MENU button Enter the Setup menu. 6) FUNCTION button Select AV, YUV, DVI, PC or TV. 7) – VOL + controls Adjust the volume level and highlight selections (
Inhaltszusammenfassung zur Seite Nr. 8
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Note: For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas. Only when you are in
Inhaltszusammenfassung zur Seite Nr. 9
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, Camcorder, Game System, etc.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S-VIDEO input on this unit (S-VIDEO cable not included). Make sure you connect both audio and video from the sa
Inhaltszusammenfassung zur Seite Nr. 10
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the video (yellow) output from the VCR to the video input on this unit (Video cable not included). Make sure you connect both audio and video from the same VCR to the same input (AV IN).
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input: Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Make sure you connect both audio and video from the same
Inhaltszusammenfassung zur Seite Nr. 12
CONNECTIONS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable (not included). Connect a stereo audio cable (not included) to the PC AUDIO IN jack on the bottom of this unit, and the other end to the AUDIO OUT jack on your computer’s sound card. PC IN CONNECTING TO SOURCES WITH DVI OUTPUT (DVD - only 480i, 480p, 720p & 1080i are supported) Connect the output from your HD source to the DVI input on this
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTIONS CONNECT THE POWER CORD Connect the AC power cord into a wall outlet. Press the STANDBY/ON button on the top of unit or remote control to turn on the unit. Note: Be sure the AC power cord is disconnected and all functions are off before making connections. Make sure that all the components are connected correctly. To prevent electrical shock, match wide blade of plug to wide slot, and fully insert. To AC outlet When you are not going to use the unit for a long period of t
Inhaltszusammenfassung zur Seite Nr. 14
3.9” INSTALLATION MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3.9” x 3.9” (100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. 3.9” USING HEADPHONES Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. When headphones are connected, no sound will come from the front speakers. N
Inhaltszusammenfassung zur Seite Nr. 15
TV SETUP MAIN MENU 1. Press the MENU button. 2. Use the or button to select the options (Picture / Sound / Setup / TV Setting / Restore Setting). 3. The screen will change to your selected mode immediately. 4. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote control. NOTE: When you are in PC, AV IN, YUV IN & DVI IN mode, the TV Setting option will not be shown. PICTURE MENU 1. Press the MENU button. 2. Use the or button to select the Picture menu, then p
Inhaltszusammenfassung zur Seite Nr. 16
TV SETUP SOUND MENU 1. Press the MENU button. 2. Use the or button to select the Sound menu, then press the button to confirm the setting. 3. Use the or button to select the options (Bass, Treble, Balance, Mode) and adjust them using the or buttons. 4. Repeat step 3 to adjust other settings. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote control. Note: TV / AV / YUV / DVI / Experiment with different sound settings until you find the settings PC M
Inhaltszusammenfassung zur Seite Nr. 17
TV SETUP PARENTAL SETTING LOCK CODE 1. Press the MENU button. 2. Use the or button to select the Setup menu, then press the button to confirm the setting. 3. Use the or button to select the Parental menu, then press the or button to confirm the setting and the menu locked screen will be displayed. 4. Enter a 4-digit lock code. Once entered, the screen will enter the Parental menu. The preset lock code is “ 0000 “. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT bu
Inhaltszusammenfassung zur Seite Nr. 18
TV SETUP PARENTAL SETTING CHILD LOCK 1. Press the MENU button. 2. Use the or button to select the Setup menu, then press the button to confirm the setting. 3. Use the or button to select the Parental menu, then press the or button. 4. Enter a 4-digit to select the Lock code and turn on/off the Child lock using or button. TV / AV MODE 5. Use the or button to select various Parental settings and use the or or button to adjust each setting. 6. Repeat steps 4-5 to adjust other options.
Inhaltszusammenfassung zur Seite Nr. 19
TV SETUP TV SETTING 1. Press the MENU button. 2. Use the or button to select the TV setting menu, then press the button to confirm the setting. 3. Use the or button to select the Channel no. setting and use the or button to change the channel no. 4. Use the or button to select the Tuning mode and use the or button to change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts). 5. Use the or button to select the Auto tune and press the or button to confirm the
Inhaltszusammenfassung zur Seite Nr. 20
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. Check that the AC power cord is connected. Turn on the unit. The remote does not Remove any obstacles between the remote and the unit. function. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace the battery in the remote with a new one. Bad Picture (snow, Check the location of the antenna and adjust it if multiple images, neccessary. distortion, blurry) Make sure the antenna cable i
