Inhaltszusammenfassung zur Seite Nr. 1
Model PAV2000DTV
MOBILE THEATER
AM/FM, with DVD/CD Changer Controller
and Motorized 7” Wide TFT LCD Display
Owner’s and
Installation Guide
Inhaltszusammenfassung zur Seite Nr. 2
INTRODUCTION Thank you for choosing the PAV2000DTV MOBILE THEATER AM/FM, with DVD/CD Changer Controller and Motorized 7” Wide TFT LCD Display. This unit provides state of the art electronics and is constructed to provide years of reliable, trouble-free service. Please read all documentation prior to using this product. The documentation will assist you in obtaining the best equipment performance. Save this manual for later use. IMPORTANT NOTICE For your safety, the driver should no
Inhaltszusammenfassung zur Seite Nr. 3
CAUTIONS AND WARNINGS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS Safety Precautions 1. Caution Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Insert the unit all the way in until it is fully locked in place. Otherwise, it may fall out of place when jolted. To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. To prevent damage to the motorized mechanism do not hold the LCD display panel while it is op
Inhaltszusammenfassung zur Seite Nr. 5
edge. Always wipe the disc from the center out with a soft cleaning cloth when cleaning the disc. Remove the disc from the DVD Player and store it in its case after playing. NOTE: Some software producers may intentionally fix some playback operations of discs. Since this DVD Player plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs. 4
Inhaltszusammenfassung zur Seite Nr. 6
TABLE OF CONTENTS INTRODUCTION ........................................................................................................................ 1 CAUTIONS AND WARNINGS .................................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS..................................................................................... 3 Safety Precautions .................................................................................
Inhaltszusammenfassung zur Seite Nr. 7
Region Number..................................................................................................................... 21 Disc Insertion ........................................................................................................................ 21 CONTROLS AND INDICATORS............................................................................................... 22 Front Panel (With the Display Closed) ................................................................
Inhaltszusammenfassung zur Seite Nr. 8
Power/ Mode .....................................................................................................................46 Open/Close........................................................................................................................ 46 Eject .................................................................................................................................. 46 Play/Pause ................................................................................
Inhaltszusammenfassung zur Seite Nr. 9
PAV2000DTV SYSTEM SPECIFICATIONS FM Tuner Specifications Frequency Range 87.50MHz to 108.0MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15dBf Alternate Channel Selectivity 70dB Stereo Separation (1kHz) 30dB AM Tuner Specifications Frequency Range 530kHz to 1710kHz Usable Sensitivity 25 dBuV TV Tuner Specifications Receiving Channel VHF LOW (S3-NZ1) VHF HIGH (E12 – E5) UHF (E69 – E21) DVD Player Specifications System Digital Versatile Disc System with CDDA capable Usabl
Inhaltszusammenfassung zur Seite Nr. 10
LCD Monitor Specifications Screen Size 7-inch wide type 166mm with x 100mm Height Display method Transmission type TN liquid crystal display Drive method TFT (thin-film transistor) active matrix driving Pixels 336,960 (1440 x 234) General Specifications Power source voltage 14.4VDC 10.8 to 15.6V allowable Ground Negative Current consumption 3.0A (1W) Auto Antenna Rated Current 500mA less Dimensions of the Main Unit 178mm width x50mm Height x 159.8mm Depth Dimensions of the Tuner Am
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLATION OF THE PAV2000DTV SYSTEM Installation Kit(s) Contents 1. Main Control Unit Accessory Kit (P/N 170-0004) 1x DIN Sleeve (P/N 108-3812) 1x Fuse/Filter Harness (P/N 112-3425) 1x Power/Speaker Harness (P/N 112-3426) 1x Remote Control (P/N 136-3712) 1x Video Cables (P/N 112-3427) 1x Antenna Extension Cable (P/N 118-1132) 1x Data Control Harness (P/N 112-3428) 2. Mounting / Bracket Hardware Kit (P/N 150-1562) 2x Mounting Bracket (P/N 108-3814) 4x #8-32x1/4" Phil.Screw, Cap P
Inhaltszusammenfassung zur Seite Nr. 12
STRAP Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. Installing the Holder After inserting the holder into the dashboard, select the appropriate tabs according to the thickness of the dashboard material and bend them inwards to secure the holder in place. HOW TO DETACH THE MOUNTING FRAME 1. Insert the release keys into the holes indicated by “A”. 2. Remove the frame “B” from the unit. NOTE: Keep the release
Inhaltszusammenfassung zur Seite Nr. 13
Installation of the RT Box Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction, for example, the source may skip. 1. Align the holes in the unit with the vehicle-mounting bracket and secure the unit with the accessory screws. 2. During installation, do not use any screw except for those provided. The use of different screws might result in damage to the main unit. NOTE: Damage may occur if a screwdriver or similar tool is used with excess
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to Power & Multi Channel AV Control Unit System Power Connection to Head Unit The illustration shown below depicts a typical power connection though the actual connection may vary depending on manufacturers (refer to the documentation supplied with the equipment to be connected). If the connection is not properly made, the unit may sustain unexpected damage. 1. Connect the Red wire (1) to ACC Power. 2. Connect the Yellow wire (2) to the Battery (+). 3. Connect the Orange/
Inhaltszusammenfassung zur Seite Nr. 15
RT Box Connections 1. Connect the Yellow wire to the Battery (+). 2. Connect the Red wire to ACC Power. 3. Connect the Black wire to Ground. WIRING DIAGRAM OF RT BOX 16PIN CONNECTOR 1. Connect the Yellow wire (1,9) to the Battery (+). 2. Connect the Black wire (2) to Ground. 3. Connect the Red wire (3) to ACC Power. 4. Connect the White wire (4) to the Positive (+) of the Left Front Speaker. 5. Connect the White/Black wire (5) to the Negative (-) of the Left Front Speaker. 6. C
Inhaltszusammenfassung zur Seite Nr. 16
8. Connect the Brown wire (8) to the Positive (+) of the Center Speaker. 9. Connect the Blue/Black wire (10) to the Negative (-) of the Navigation Sound 10. Connect the Blue wire (11) to the Positive (+) of the Navigation Sound 11. Connect the Green/Black wire (12) to the Negative (-) of the Left Rear Speaker. 12. Connect the Green wire (13) to the Positive (+) of the Left Rear Speaker. 13. Connect the Purple/Black wire (14) to the Negative (-) of the Right Rear Speaker. 14. Connect the
Inhaltszusammenfassung zur Seite Nr. 17
If a DVD or VCD Changer is used, connect the Video Output of the changer to the Video Input of AV2. Do not connect the Audio Output of the changer to the Audio Input of AV2 this connection is done through the Din Cable connection. NOTE: • Make sure that power is OFF before making signal connections. • Connect the Head Unit MINET Jack directly to RT Box MINET Jack 16
Inhaltszusammenfassung zur Seite Nr. 18
• When installing a Subwoofer, use an additional power amplifier equipped with a Subwoofer analog line out. WARNING The Digital Audio Output of this DVD player can only be connected to a compatible Dolby Digital and/or DTS decoder or to an amplifier equipped with a digital audio input. High volume digital signals may damage other equipment and hearing. Connecting to the DVD Changer Control System Connecting to the Multi Channel AV Control Unit System w/ Additional 6CH Amp The I
Inhaltszusammenfassung zur Seite Nr. 19
NOTE: For a more powerful 5.1CH sound system, an additional power amplifier of 6CH or 5CH +1CH amplifier will need to be added to the system. 18
Inhaltszusammenfassung zur Seite Nr. 20
FRONT PANEL MAINTENANCE Lens Fogging In certain weather conditions, dew or condensation may form on the lens in the player. In this condition, it may be possible that the discs will not play. If this happens, remove the disc and wait for the condensation to evaporate. If the unit does not operate normally after a while, consult your Audiovox dealer. Cleaning the Unit If it becomes necessary to clean the front panel of the unit, use a clean dry soft cloth wipe it clean. If the front
