Inhaltszusammenfassung zur Seite Nr. 1
®
User’s Guide
Encore Software
For OMB-NET6000 Series
Rev. 1.1
Includes:
Documentation on CD Shop online at
®
System Requirements:
omega.com
® ®
Windows 7/Vista/XP SP2 (32-bit)
/2000 SP4
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
®
ENGINEERING,INC.
®
800-DAS-IEEE (800-327-4333)
© COPYRIGHT 2012 OMEGA ENGINEERING, INC.
ENCORE SOFTWARE
FOR OMB-NET6000 SERIES
Ethernet-Based Temperature,
Voltage and Strain
Measurement Modules
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Introduction ........................................................................................................................................................ 3 System Requirements ......................................................................................................................................... 3 PC ....................................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Encore Software for the OMB-NET6000 Series Introduction Encore is interactive measurement software designed for acquiring, analyzing, logging, and viewing data from Omega Engineering OMB-NET6000 Series data acquisition devices. No programming is required. This document shows you how to perform the following tasks with Encore software: Acquire data from an analog input channel Log the data Play back the logged data Analyze the signal Export the data System Requirements The s
Inhaltszusammenfassung zur Seite Nr. 4
Encore Software for the OMB-NET6000 Series Adding a device to an Encore project Encore automatically detects OMB-NET6000 Series hardware connected to your system. You can add any detected devices to an Encore project. You can also add a simulated device to the project. The procedures in this document use the OMB-NET6220 device and default settings. Complete the following steps to add a device to an Encore project: 1. Launch Encore software from Start»Programs»Omega»Encore»OMB-NET6000 En
Inhaltszusammenfassung zur Seite Nr. 5
Adding a device to an Encore project The Acquisition Setup tab opens and displays options for configuring analog channels (Figure 2). Figure 2. Hardware Configuration window – Acquisition Setup tab Note: Each additional click of the Next button displays options for configuring digital channels, counter channels, acquisition settings, and trigger settings, respectively. 4. Click 6220:CH1 and select the Enable Input checkbox and the Enable Logging checkbox. 5. Click OK. The Encore main
Inhaltszusammenfassung zur Seite Nr. 6
Encore Software for the OMB-NET6000 Series Encore user interface Figure 3. Encore user interface Refer to the following table for a description of each component. Encore user interface components Callout Description The Signal Explorer displays the data sources, computations, snapshots and logs available for your project. You can select and drag signals into the Data View or directly Into Excel. The Log window displays a list of the logged data and snapshots in a project. Snapsho
Inhaltszusammenfassung zur Seite Nr. 7
Acquiring and logging data Acquiring and logging data Complete the following steps to acquire and log data from channel 1: 1. From the Signal Explorer, select the signal (6220:CH1) or measurement group (Voltage) and drag it onto the graph in the Data View. 2. Click Start. The acquired data displays on the graph in the Data View, as shown in Figure 4. Note that the Start button changes to Stop when a project is running. Figure 4. Acquiring and logging data The Logs area updates with a
Inhaltszusammenfassung zur Seite Nr. 8
Encore Software for the OMB-NET6000 Series 2. From the Signal Explorer, drag the Measurement group (Voltage in this example) onto the graph in the Data View. 3. Click Play. Data playback begins. The timeline marker shows the playback progress. Select View»Playback Options to change playback settings, such as the start and stop time or block size. Performing computations on logged data You can perform computations on data in either the Measurement Work Area or Playback Work Area. The f
Inhaltszusammenfassung zur Seite Nr. 9
Exporting data to Microsoft® Excel® ® ® Exporting data to Microsoft Excel You can export signal data to Microsoft Excel from the Signal Explorer, the Log window, and the Data View. To export data from the Signal Explorer, right-click on the measurement group or signal(s) and select Export To»Excel. To export data from the Data View, right-click on the display plot and select Export To» Excel. To export data from the Log window, right-click on the measurement group and select Expor
Inhaltszusammenfassung zur Seite Nr. 10
® ® OMEGAnet Online Service Internet e-mail omega.com info@omega.com Servicing North America: Servicing Europe: Benelux: Managed by the United Kingdom Office U.S.A.: Omega Engineering, Inc., One Omega Drive, P.O. Box 4047 Toll-Free: 0800 099 3344 TEL: +31 20 347 21 21 ISO 9001 Certified Stamford, CT 06907-0047 FAX: +31 20 643 46 43 e-mail: sales@omegaeng.nl Toll-Free: 1-800-826-6342 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Czech Republic: Frystatska 184 733 01 Karviná, Czec
