Inhaltszusammenfassung zur Seite Nr. 1
by FUJITSU TEN
6.5" Wide TFT Touch-Panel Display CD / DVD Multi-Source Receiver with DVD NAVIGATION
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly before carrying out installation and making
connections. If installation methods or non-standard parts that are not specified in this installation
manual are used, accidents or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's
Inhaltszusammenfassung zur Seite Nr. 2
Components Check that all of the following components are present Components Check that all of the following components are present Main unit components 1 Main unit x 1 Interconnecting cable Interconnecting cable Interconnecting cable 2 3 4 (Speed pulse parking brake and (Power and front speaker connector) (Rear speaker connector) reverse signal connector) (10P) x 1 (6P) x 1 (5P) x 1 Interconnecting cable Antenna Hex-head bolt Flathead screw Splicing connector 5 6 7 8 9 (Video input connector
Inhaltszusammenfassung zur Seite Nr. 3
For your safety in using the AVN2454 For your safety in using the AVN2454 Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN2454. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed in this section. This sign indicates a situation in which incorrect handling t
Inhaltszusammenfassung zur Seite Nr. 4
This unit is intended for operation in DC 12volt, Do not operate the product in a malfunctioning • • negative-grounded vehicles only. Never use it in 24- condition, for instance, when the audio does not play. volt vehicles such as heavy trucks or diesel cars with Doing so may result in an accident, fire or electrical cold-region specifications. shock. • Do not place the vinyl storage bag over a person. It • If an abnormal situation occurs, such as foreign may cause a serious accident or death by
Inhaltszusammenfassung zur Seite Nr. 5
Installation Diagram Installation Diagram 11 GPS antenna (When installing inside the vehicle) Tip 11 GPS antenna (When installing outside the vehicle) Main unit 1 Tip •If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. If this occurs you may want to install the antenna outside of the vehicle. •The materials used in front and rear vehicle windows can cause GPS reception
Inhaltszusammenfassung zur Seite Nr. 6
Names and functions of terminals Names and functions of terminals • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. •The cables should be secured with tape or similar so that they will not cause an obstruction while driving. If they get wound around components such as the steering wheel, shifting lever or brake pedal, accidents may result. GPS ANTENNA 11 MAIN UNI
Inhaltszusammenfassung zur Seite Nr. 7
Wire colors and connection points for connection cables 2 and 3 Never connect the power supply to the speaker leads (No.6 and No.7), otherwise it will cause damage to the main unit. Caution 1 B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. 2 ACC (Red) Connect where the power comes on when the ignition is in the ACC position. 3 Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light switch is turned on. 4
Inhaltszusammenfassung zur Seite Nr. 8
Main unit connections E-LAN terminal (13P) A Connect to the E-LAN terminal of the CD changer, etc. Genuine steering remote control terminal B Connect to the vehicle steering remote control. Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control. Ask your dealer for details. VIDEO OUT terminal (Yellow) C Connect to a monitor with video input. Front line-out terminal D Connect to the RCA connector of an external amplifier. E Rear line-out termina
Inhaltszusammenfassung zur Seite Nr. 9
Connecting the vehicle speed pulse signal, Connecting the vehicle speed pulse signal, parking brake cable and reverse cable parking brake cable and reverse cable Notes on installation • Check the vehicle speed pulse signal, parking brake signal and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result. • The label on the vehicle speed pulse signal cable contains a protection circuit, so do not cut
Inhaltszusammenfassung zur Seite Nr. 10
- An example for connecting the parking brake signal - Tip Always be sure to connect the parking brake signal cable, otherwise the measurement precision will be greatly reduced. Use the splicing connector to connect the 1 parking brake signal connector (red/white) of the interconnecting cable 4 to the parking brake signal cable. Route the parking brake signal cable to the main 2 unit. Hand-operated Parking brake Position to attach a splicing connector Parking brake Signal Cable Parking brake sig
Inhaltszusammenfassung zur Seite Nr. 11
- Using the splicing connector - 1 Insert the connection cable 4 [vehicle speed Interconnecting cable pulse signal cable (purple/white), parking brake 4 Vehicle speed pulse signal cable cable (red/white) or reverse cable (green)] and (purple/white), parking brake cable (red/white) or reverse cable (green) the vehicle cable into the splicing connector. Harness in the car Push in the terminal (the metal part) of the 2 splicing connector using a pair of pliers. Splicing connector 9 Press down the c
Inhaltszusammenfassung zur Seite Nr. 12
System connection example System connection example • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • The cables should be secured with tape or similar item so it will not cause an obstruction while driving. If they get wound around components such as the steering wheel, shifting lever or brake pedal, accidents may result. Tip • Install and connect all of the
Inhaltszusammenfassung zur Seite Nr. 13
Installing the GPS antenna Installing the GPS antenna Notes on installation • The cables should be bound together with tape or similar so that they do not interfere with driving. If it becomes wound around parts such as the steering wheel, shifting lever or brake pedal, accidents may result. •Do not install the GPS antenna where it will obstruct the driver's vision or where it will be an obstacle while driving, otherwise traffic accidents may result. Tip • If installing the GPS antenna inside th
Inhaltszusammenfassung zur Seite Nr. 14
- Installation inside the vehicle (example) - Choose an installation location on the dashboard 1 which is flat and has a clear view of the sky. Tip 13 Ground plate 11 GPS antenna Select a location that is at least 19.68 in. away from the main unit. If this is not done, the GPS measurement precision will drop. Install the ground plate to the dashboard. 2 Tip Install the GPS antenna to the ground plate. 3 Front of vehicle Tip If installing the GPS antenna inside the vehicle, the installation locat
Inhaltszusammenfassung zur Seite Nr. 15
- Installation outside the vehicle (example) - Choose an installation location where the GPS 1 antenna can be attached securely. GPS antenna 11 Remove the backing paper from the body 2 14 Body protective sheet (clear) protective sheet and attach the sheet to the vehicle. Install the GPS antenna on top of the body 3 protective sheet. Front of vehicle Route the GPS antenna cable inside the vehicle's 4 trunk and secure it with clamps. Clamp 15 Waterproof cushion 12 (metal) Attach the waterproof cus
Inhaltszusammenfassung zur Seite Nr. 16
Installing the main unit Installing the main unit - Installation angle - Tip To maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in Front excess of 30 degrees, DVDs, CDs, skipping and improper DVD, CD and Memory Stick ejection may occur. 30˚ or less Level (reference) - Mounting the main unit (example)- Tip Connect all cables before installing the main unit. Center cluster panel Pocket, etc 1 Remove the pocket and any other accessories from the center clust
