Inhaltszusammenfassung zur Seite Nr. 1
Omnitech GPS
User Manual
Model Number: 16877-CA
Model Number: 16878-US
V.1.0
Inhaltszusammenfassung zur Seite Nr. 2
Warranty Conditions Manufacturer is not responsible for any product defects due to misuse, abuse, or usage of product in way that is not in compliance with the written product instructions. To use this product other than expressed in the instructions will void customer's product warranty. Precautions and Notices Do not attempt to operate the GPS Personal Navigation Device (PND) in a vehicle while the vehicle is in motion or in anyway that interferes with sa
Inhaltszusammenfassung zur Seite Nr. 3
FCC Statement Omnitech GPS Model Number 16877-CA and 16878-US: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4 & FCC Part 15 regulations for the evaluation of electromagnetic compatibility. This device complies with Part 15 of the FCC rules; operation is subject to the following two conditions: (1) This device may not cause harmful interference and, (2) This device must accept any interference received, including interference that may cause undesi
Inhaltszusammenfassung zur Seite Nr. 4
Contents 1. Package Contents 1 10. Maps 21 Map Icons……………………………………………………………... 22 2. Controls and Indicators 2 Travel by Tapping the Map………………………………………….. 23 Night Map View……………………………………………………….. 24 3. Mounting Hardware 3 Browse Map…………………………………………………………… 24 Map Display…………………………………………………………... 25 4. Installation Instructions 4 Map Selection…………………………………………………………. 26 5. Powering the GPS 5 11. Settings 27 Configuration Wizard………………………………………………… 27 6. Introduction 5 POI Displ
Inhaltszusammenfassung zur Seite Nr. 5
1. Package Contents ITEM NAME GPS with 4.3” LCD screen Car mount Car charger User Manual CD Quick Start Guide Warranty Card Omnitech GPS User Manual 1
Inhaltszusammenfassung zur Seite Nr. 6
2. Controls and Indicators On/Off Power button Press and hold this button for 2 seconds to turn the device On/Off. Press for 1 second to switch the device into/back from Standby Mode. The GPS still draws a small amount of power while in Standby Mode. Press the reset switch to restore the system default setting and to shut down the device. Pressing the reset switch will not delete any records in the software. Omnitech GPS User Manual 2
Inhaltszusammenfassung zur Seite Nr. 7
3. Mounting Hardware Car Mount The car mount keeps your GPS unit secured to the windshield giving you an optimal satellite signal reception. Use the push buttons to adjust viewing angles; up/down and left/right. IMPORTANT: The car mount should be mounted at least 6” from the vehicle’s airbag system. Omnitech GPS User Manual 3
Inhaltszusammenfassung zur Seite Nr. 8
4. Installation Instructions Suction Mount Instructions 1. Find a place to position the suction cup where it doesn't interfere with your vision of the road. 2. With the suction cup lever in the up or off position, push the suction cup against the glass, then push the suction cup lever to the down or on position. Doing so creates the suction needed to secure the car mount to the glass. 3. Once the car mount is secured to the windshield, attach the car mount attach the GPS device to the
Inhaltszusammenfassung zur Seite Nr. 9
5. Powering the GPS Using the car charger in your vehicle After starting your vehicle, do the followings: 1. Plug the car charger into the mini USB connector (USB port) on left side of the GPS device. 2. Plug the other end of the car charger into your vehicle's DC Power receptacle. 6. Introduction Welcome to the world of mobile navigation! Simple operation, clear maps in 2D or 3D mode as well as numerous innovative features and functions have made Destinator the ess
Inhaltszusammenfassung zur Seite Nr. 10
7. Menus Displayed below are Destinator’s main menus. Go – Lets you select a location to travel to. Map – Displays route and map options. Settings – Lets you choose setting options. Manage Route – Additional features that determine the route. Omnitech GPS User Manual 6
Inhaltszusammenfassung zur Seite Nr. 11
8. Creating a Route Address 1. Tap 2. Tap 3. Select an address entry mode: Town/City First displays cities first and is most commonly-used. Intersections or Road Junctions lets you travel to a designated cross-street location. Change State lets you change the map to another state. Omnitech GPS User Manual 7
Inhaltszusammenfassung zur Seite Nr. 12
4. Enter City. 5. Enter Street. 6. Enter Address Number or Street Midpoint. 7. Tap Go. Omnitech GPS User Manual 8
Inhaltszusammenfassung zur Seite Nr. 13
Selecting Address Intersection You can instruct Destinator to create a route to a selected intersection. 1. Tap Intersections. 2. Select city and tap OK. 3. Select a street and tap OK. 4. Select a cross street and tap OK. 5. Tap Go. Omnitech GPS User Manual 9
Inhaltszusammenfassung zur Seite Nr. 14
Changing State or In Other Countries (where available) You can change from one state to another. The State screen shows the states that are available in the current map. 1. Tap Change State. 2. Select state and tap OK. Traveling To Options You can select from the following options: • Save – Store address to a selected folder. • Start Point – Designate address as the starting point. • Demo Route – Run simulated route to selected address. Omnitech GPS User Manual 10
Inhaltszusammenfassung zur Seite Nr. 15
POI Points of Interest (POI) are a collection of thousands of interesting or useful places organized into easy-to-find categories and subcategories. Searching by POI Categories Search-Around Options: My Current Location – Search near your current location. My Destination – Search near 1. Tap your destination. Another City – Search in another city. 4. Tap a category. 3. Tap a Search Around option (My Current Location is selected by 2. Tap default) and the Category button.
Inhaltszusammenfassung zur Seite Nr. 16
Searching by POI Name You can search for a POI by entering the entire name, individual words in the name, or letters in the words. Here, enter “avis” for example. 1. Tap the Name button. 3. Select location and tap OK to Traveling To 2. Enter a search string and tap the screen. Tap the Scroll Down key to see the Search button. next six results. Sort by ABC – Shows locations alphabetically and not by distance from your location. Sort by Distance – Shows locations by distance from
Inhaltszusammenfassung zur Seite Nr. 17
Tap the button to display the station address and to center the station on the map. When you have selected a station, click OK to the Traveling To screen. Browsing the Entire POI List You can display the entire POI Category list. 1. Tap 2. Select a POI category and tap OK. 3. Select a POI location and tap OK. 4. Tap Go. Traveling To Options For information, see the Traveling to Options on page 10. Omnitech GPS User Manual 13
Inhaltszusammenfassung zur Seite Nr. 18
Recent Locations You can select from a list of recent locations that you have traveled to. 1. Tap 2. Tap 3. Select a location. 4 .Tap Go. Traveling To Options For information, see the Traveling to Options on page 10. Favorite Locations A Favorite location is a destination that you have stored for easy retrieval. Saving a Location From the Save Location screen, you can tap the right and left arrow keys to select a group to where you want to save your location. To c
Inhaltszusammenfassung zur Seite Nr. 19
1. Tap Save. 2. Enter a name for the location, select a group (optional), and tap OK. The location is automatically saved in My Favorites if a group is not selected. Traveling to a Favorite Location 1. Tap 2. Tap 3. Select the location and tap OK. 4. Tap Go. Omnitech GPS User Manual 15
Inhaltszusammenfassung zur Seite Nr. 20
Creating Groups for Favorite Locations You can use groups to organize your favorite locations. Additional Commands: • Tap Edit Location to rename a selected group. • Tap Delete Location to remove a selected group. 1. Tap 2. Tap 4. The group appears. 5. Save favorites in group. 3. Enter a group name and tap OK. Traveling To Options For information, see the Traveling to Options on page 10. Omnitech GPS User Manual 16
