Inhaltszusammenfassung zur Seite Nr. 1
EL-ZOOM
STILL
–
MON CAM
SEQ PAUSE SEQUENCE
PATROL PLAY
ESC LOGOUT SET
SLOW PATROL PATROL PROGRAM
STOP LEARN PRESET
ALM RECALL
+
3
1 2
6
5
4
7 8 9
0
PROGRAM
UP
SHIFT
FUNCTION CAM FUNCTION
UNIT A FOCUS
AUTO
ALM RESET ALM SUSPEND
NEAR FAR
UNIT
B/W
L
VCR CAM MULTI SCREEN SELECT DEF
R
UNIT B
ZOOM
AUX 2
WIDE TELE
WIPER
DOWN
AUX 1
HOME/PRESET
SETUP
CAM SETUP
IRIS
CLOSE OPEN
IRIS RESET
AUTO FOCUS
MONITOR
UNIT BUSY PROHIBITED
OPERATE
LOGIN ALARM CAMERA
System Controller WV-CU 360C
System Controlle
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the bottom. For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part CAUTION 15 of the FCC Rules. These limits are designed to provide RISK OF ELECTRIC SHOCK reasonable protection against harmful interference when the DO NOT OPEN equipment is operated in a commercial environment. This equipment generates, uses, and can ra
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarize
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................ 3 VTR (VCR) Control ..................................................... 50 PREFACE .......................................................................... 5 Camera Setup ............................................................ 51 FEATURES ........................................................................ 5 PRECAUTIONS ................................................................. 5 MAJOR OPERATING CONTROLS
Inhaltszusammenfassung zur Seite Nr. 5
PREFACE The System Controller WV-CU360C is designed for setup are supplied to adapt the names printed on the buttons to and operation of cameras and other system units installed the functions of the unit you wish to control. in a surveillance system. You can operate a whole system from the controller, for The controller is compatible with the Panasonic Security example, by selecting cameras and monitors, watching • Data (PS Data) protocol by default, but DIP switches are monitor screens and indi
Inhaltszusammenfassung zur Seite Nr. 6
4 3 2 1 MAJOR OPERATING CONTROLS & THEIR FUNCTIONS Rear View and AC Adapter q w e r t 0 RISK OF ELECTRIC SHOCK. DO NOT OPEN RISQUE DE CHOCS ELECTROUES CONTROLLER No. MODE DATA NE PAS OUVRIR DC 9V IN y DC 9V IN q Controller Number Switch (CONTROLLER No.) t Clamp This switch is used to assign a controller number to the The clamp fastens the power cord to the AC adapter. System Controller to identify it in a system comprising multiple System Controllers (See page 14). A system y AC Adapter may c
Inhaltszusammenfassung zur Seite Nr. 7
2 3 1 5 6 4 7 8 9 0 OPERATE LOCK ALARM UNIT CAMERA System Controller WV-CU For Multiplexer CAMERA SITE CONTRIL MULTI ALT SPOT SCREEN IRIS CLOSE OPEN IRIS RESET UP VTR ALM RESET SEQUENCE AUTO/+ FOCUS CAM NEAR FAR ALL RESET AUX 2 ALM SUSPEND EL-ZOOM MULTI SELECT L R HOME/- ZOOM TELE WIDE FUNCTION PRE-POSI STILL AUX 1 DOWN AUTO CAMERA SET SET UP UNIT CAM FOCUS ON OFF ON/OFF ESC SET T/L MODE INSTALLATIONS 1. Select the correct template for your system. Template Mounting • •Select the PSData te
Inhaltszusammenfassung zur Seite Nr. 8
4 4 4 4 4 4 3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 1 1 Rear Panel Switch Setting (Summary) An 8-bit DIP switch and a rotary switch mounted on the rear of the controller specify the system unit ID and parameters for • communication. Switch settings depend on your system configuration such as a PS Data system, WJ-FS616C Multiplexer sys- tem, WJ-SX350 Matrix Switcher system or System 850. A summary of switch positions is shown below. For detailed information refer to the description of switch settings
Inhaltszusammenfassung zur Seite Nr. 9
Panasonic Security • Data (PS Data) Systems 9
Inhaltszusammenfassung zur Seite Nr. 10
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS • Front View (Template for PS Data) qe w rt yu i MONITOR OPERATE LOGIN ALARM CAMERA BUSY PROHIBITED UNIT System Controller WV-CU360C !8 PROGRAM !9 SETUP CAM SETUP IRIS CLOSE OPEN @0 SHIFT FUNCTION CAM FUNCTION IRIS RESET UP @5 ALM RESET ALM SUSPEND AUTO UNIT A FOCUS NEAR FAR @6 ALM RECALL B/W UNIT AUTO FOCUS VCR CAM MULTI SCREEN SELECT DEF LR @7 UNIT B @8 ZOOM AUX 2 WIDE TELE @9 STILL EL-ZOOM WIPER DOWN #0 – + AUX 1 #1 SEQ PAUSE SEQUENCE PATROL PLAY
Inhaltszusammenfassung zur Seite Nr. 11
o Iris buttons (IRIS, CLOSE/OPEN) !7 Monitor/Escape button (MON/ESC) Close or open the lens iris of cameras equipped with MON: Used for monitor selection and confirmation. To the specified lens. select a monitor, enter the desired monitor number When these buttons are pressed simultaneously, the with the numeric buttons, and then press this but- lens iris is reset to the factory default setting. ton. The selected monitor number appears on the LED display. !0 Focus buttons (FOCUS, NEAR/FAR) To co
Inhaltszusammenfassung zur Seite Nr. 12
@2 Defroster/Auxiliary 2 button (DEF/AUX 2) @9 Electronic Zoom/Increment button (EL-ZOOM/+) Activates the housing defroster of cameras provided Zooms the camera picture or VCR playback picture dis- with this feature. Pressing this button in the shift mode played on the multiscreen monitor. will turn on the AUX 2 function controlling accessories Pressing this button in the shift mode will move the connected to the cameras or the system. camera sequence one step forward from the step previ- The LE
Inhaltszusammenfassung zur Seite Nr. 13
4 4 3 3 2 2 1 1 0 INSTALLATIONS (PS•Data) CAUTION The installation should be made by qualified service personnel or system installers according to the following instructions. System Connections Connection Example Example 1 shows 8 cameras connected to 2 Data Multiplex Units (WJ-MP204C), to a Video Multiplexer (e.g., WJ-FS316) and a Digital Disk Recorder (e.g., WJ-HD100). The WV-CU360C controls these system units through RS-485 communication while pictures are viewed on the monitors. Camera N
Inhaltszusammenfassung zur Seite Nr. 14
Example 2 shows 4 Data Multiplex Units connected with 16 combination cameras, and 4 System Controllers. 4 cameras can be connected to one Data Multiplex Unit Channel 1 Channel 2 Channel 4 Channel 13 Channel 14 Channel 16 Up to 4 Data Multiplex Units WJ-MP204C Data Multiplex Unit WJ-MP204C Data Multiplex Unit WJ-MP204 Data Multiplex Unit WJ-MP204 Unit Unit Unit address 1 address 2 address 4 Controller No. 2 Controller No. 4 Controller No. 1 System Controller WV-CU 360 System Controller WV-CU 360
Inhaltszusammenfassung zur Seite Nr. 15
• Daisy Chain Connection Video Multiplexer Data Multiplex Unit System Controller WJ-FS309 (WJ-FS316) WJ-MP204C WV-CU360C DATA DATA DATA Termination: Termination: Termination: Branch ON OFF ON Cable RS-485 RS-485 Cable Cable • DIP Switch Setting (PS Data) An 8-bit DIP switch mounted on the rear panel specifies the communication mode, etc. The default position is marked with an asterisk *. OFF ON 1 2 345 6 7 8 MODE SW position Function OFF ON Bit 8 Data transmission mode Fixed to OFF* Not used
Inhaltszusammenfassung zur Seite Nr. 16
4 3 2 1 MODE Switch Setting for System Example 2 • Controller Number Setting (PS Data) The MODE switch needs to be set prior to operating a sys- A 10-position rotary switches provided on the rear for spec- tem connected as shown in Example 2. ifying the unit number of the WV-CU360C controller in a • PS Data system. 1. Remove the DC plug from the rear of the controller. 2. Use a screw driver to rotate the switch so that the arrow OFF comes to the number you wish. ON 1 2 345 6 7 8 0 Bit 3 shou
Inhaltszusammenfassung zur Seite Nr. 17
CONTROLLER SETUP PROCEDURES (PS•Data) To display the setup menus for the WV-CU360C System Controller on the LED display, set the MODE switch and power up the controller as described below. Prior to Setup Buttons and Controls used for Setup Do the following before entering the setup mode. The following buttons and joystick operations are used in the setup operation. There are three ways to select a para- 1. Confirm that all necessary connections and switch set- meter, but the following pages
Inhaltszusammenfassung zur Seite Nr. 18
Setup Menus There are 12 setup menus as shown below. Setup Menus Parameter Selection (default*) Menu LED Display Reading Function Selection CAM Initial LED prompts you to enter a pass- Setup Display word SET No CAM Enter a 5-digit Administrator password, press Password Authorization (12345*) OK blinking Prompt SET Press Baud Rate (1) 2 400 (2) 4 800 (3) 9 600* twice Speed (bps) (4) 19 200 CAM Parity Parity Check (1) None* (2) Even SET MON Wait Time (1) Off* (2) 100 (3) 200 (4) 400 Wai
Inhaltszusammenfassung zur Seite Nr. 19
Administrator Authorization Parity 1. Press the CAM/SET button while [SEtUP] is displayed. In this menu, the parity check mode is selected. The [- - - - -] prompt appears. 1. Display [PrtY] and press the CAM/SET button twice. 2. Enter a password with the numeric buttons, then press the CAM/SET button. 2. Select a parameter with the joystick. The default setting is [12345]. The default setting is None. 3. [SPEED] appears when the right password is entered. If n: None password entry failed, th
Inhaltszusammenfassung zur Seite Nr. 20
Unit A button Assignment Unit B button Assignment In this menu, a maximum of 9 system units is assigned to The UNIT B button is set up in the same way as the UNIT A numeric buttons 1-9 regardless of unit address. button for use in normal operation. Refer to the above This is to avoid double-digit unit addresses which can description for Unit A button Assignment. occur in a large system with many units connected and could confuse operators. A frequently used system unit can be easily selecte
