Inhaltszusammenfassung zur Seite Nr. 1
FV-L
Version 1.52_Eng
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Message Welcome Message Thank you for choosing a beyonwiz FV-L1, the epicentre of your home entertainment network. The FV-L1 supports all the features of a conventional digital broadcasting receiver or STB (Set-Top Box) and PVR (Personal Video Recorder). As well as the dual DVB-T digital tuners, the FV-L1 also enables you to listen to or watch multimedia content from: Storage devices attached to the integrated USB (Universal Serial Bus) connectors The integrated CF card slot
Inhaltszusammenfassung zur Seite Nr. 3
Precaution Precaution Do not repair, disassemble or modify this product yourself. Doing so Read this manual carefully before using this product. The cautions can cause a fire or electric shock. If internal checking or described below contain important information about safety, and are maintenance is needed, please contact your local beyonwiz service categorized into: Danger, Warning and Notice. beyonwiz will not be centre or agency. responsible for accidents or damage result
Inhaltszusammenfassung zur Seite Nr. 4
Precaution WARNING NOTICE If the product is mishandled, the user might receiver a serious If the product is mishandled, it might cause minor damage. or minor injury. Damage or loss to the user’s property may also If the product becomes marked, clean it gently with a soft cloth or occur. towel. Never use chemical solvents such as benzene, thinner, The product must not be exposed to water or liquid. If the product is acetone or other solvents. The surface of the product might
Inhaltszusammenfassung zur Seite Nr. 5
Precaution About the internal hard disk drive The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the product within the guidelines below to protect against possible HDD failure or to protect against accidental data loss. This symbol is intended to alert the user to the presence of Do not move the product whilst it is on. un-insulated “dangerous voltage” within the product’s Install and use the product on a stable, level surface. enclo
Inhaltszusammenfassung zur Seite Nr. 6
Precaution Copyright This manual is protected by copyright laws. Copy, use, reproduction of this manual in part or whole without beyonwiz's prior written permission is prohibited. Disclaimer The manufacturers, distributors and agents are not liable for any kind of damage caused by the use of the information contained in this manual. The instruction and descriptions which this manual contains are based on the time of this manual's production. T
Inhaltszusammenfassung zur Seite Nr. 7
Contents Contents 4. Quick Setup 19 Welcome Message i 1. Start Quick Setup 19 Precaution ii 1-1. Quick Setup of Video Output Format 20 1-2. Basic Operation 21 1. Package Contents 3 2. Configuration 24 2-1. Time Setting 24 2. Introduction 5 2-2. A/V Output Setting 25 1. FV-L1 Highlights 5 2-3. Service Scan 27 2. Front Panel 6 2-4. LiDiC (Line-in Digital Converter – available separately) 29 2-1. Buttons 6 3. Network 30 2-2. Slot Door 6 3-1. Enable Ethernet 30 2-3. F
Inhaltszusammenfassung zur Seite Nr. 8
Contents 3. PVR Functions 47 8. Internet Service 84 3-1. Time-shifting 47 3-2. Instant Recording 48 9. Advanced Setup 85 3-3. Timer 50 1. Miscellaneous 85 3-4. Trick Mode Operation 55 1-1. Favorite 85 3-5. Recording Control 56 1-2. OSD 87 3-6. Timer Conflict 58 1-3. Access Control 88 1-4. PVR 90 4. EPG (Electronic Program Guide) 60 1-5. File Player 93 4-1. EPG with Multiple Services 60 1-6. Preference 94 4-2. EPG with Single Service 61 2. Management 95 4-3.
Inhaltszusammenfassung zur Seite Nr. 9
This page intentionally left as blank.
Inhaltszusammenfassung zur Seite Nr. 10
1. Package Contents The following items are included in the box. Please check all package contents before using your product. FV-L1 Remote Control Batteries (AAA size x2) User Manual RCA Audio/Video Cable Component (Y/Pb/Pr) Video Cable Ethernet Cable 3
Inhaltszusammenfassung zur Seite Nr. 11
This page intentionally left as blank. 4
Inhaltszusammenfassung zur Seite Nr. 12
Introduction 2. Introduction 1. FV-L1 Highlights As a HD (High Definition) multimedia epicentre, the FV-L1 supports Dual Tuner DVB-T Compliant with Internal Loop through various ways of connecting to HD TVs and audio systems; HDMI port Video Output Composite, S-Video, Component (Y, Pb, Pr), HDMI combining with HD video decoders, which support MPEG-2, MPEG-4, Audio Output 5.1ch RCA for analog audio output H.264 and WMV9, give you the true HD digital A/V experience. Dolby Digit
Inhaltszusammenfassung zur Seite Nr. 13
Introduction 2. Front Panel 2-1. Buttons 2-2. Slot Door Five buttons are placed on the front panel. A slot door is placed on the right side of the front panel. If you open the door, you will find the following ports; STANDBY Button: it switches the FV-L1 between the operation and standby modes. USB: you can connect a USB storage device which is compatible with CHANNEL Buttons: the top and bottom parts of the circular button the USB standard specification. work as
Inhaltszusammenfassung zur Seite Nr. 14
Introduction 3. Rear Panel 1 Indicates hard disk space used. Lights when there is no space left on the HDD. 2 Lights when there is no time information. 3 Lights when a timer recording is programmed in standby mode. 4 Lights when the signal is being output via HDMI. 5 Lights when the signal is High Definition (will be implemented). 6 Indicates the resolution of video output. 1. RF ANTENNA IN 5. OPTICAL AUDIO 9. 5.1 CH AUDIO 7 Lights when the video output is in Pro
Inhaltszusammenfassung zur Seite Nr. 15
Introduction 1 STANDBY Switch the FV-L1 between Operation and Standby mode. 2 N/A Left for later use. 3 STB Change to STB mode. 4. Remote Control 4 TV/RADIO Select either TV or Radio while in STB mode. 5 TV-OUT Change Video Output. (Refer to page 17 for more information) 6 TV Control standard TVs with this remote control. 4-1. Operating FV-L1 7 SETUP Go to SETUP Menu. 8 WizTV Go to Internet Service. 9 LIVE Go to Live TV. In order to operate the FV-L1 with the enclosed remote
Inhaltszusammenfassung zur Seite Nr. 16
Introduction 4-2. Operating TV set 2) Manual Set You can set your remote control with 3-digit code manually. Check the The enclosed remote control can also be used to control a TV set following table and find the brand of your TV. provided by major TV manufacturers. In order to operate a TV with the Turn on your TV then press and hold the TV button until the red- enclosed remote control, please select TV mode by pressing the TV backlight turns on
Inhaltszusammenfassung zur Seite Nr. 17
Introduction NOTE JVC 207 212 247 264 323 If your TV brand is not listed in the table, visit the following website 385 to get the correct code, if available: http://www.beyonwiz.com.au/ . LG 208 215 224 229 253 The remote control will not always be compatible with brands of 286 307 344 374 385 televisions. If this remote doesn’t work, or no code exists, continue 387 410 412 to use the original remote from the manufacture of your TV. NEC 205 207 208 215 224 229 248
Inhaltszusammenfassung zur Seite Nr. 18
Introduction 1 STANDBY 0xBE000AF5 2 EJECT 0xBE0040BF 3 STB N/A 4 TV/RADIO 0xBE0055AA 4-3. Remote Control HEXA Code 5 TV-OUT 0xBE0042BD 6 TV N/A The picture below and table on the right provide you with information to 7 SETUP 0xBE0007F8 8 WizTV 0xBE0052AD allow you to program your own programmable remote control to 9 LIVE 0xBE0008F7 10 FILE PLAY 0xBE0044BB operate the FV-L1. The coding system used for the FV-L1 is the NEC 11 VOL +/- 0xBE0002FD 0xBE0003FC 12 CH +/- 0xBE000
Inhaltszusammenfassung zur Seite Nr. 19
This page intentionally left as blank. 12
Inhaltszusammenfassung zur Seite Nr. 20
How to Connect 3. How to Connect 1-1. Video Connection 1. A/V Connection To connect your FV-L1 to your TV or display, the following options are Depending on the A/V equipment you own, there are various ways you available (in order from highest to lowest quality); can connect the FV-L1. To choose the best connection option, please HDMI (high definition compatible) refer to the manual of equipment you would like to connect to. Component (Y/Pb/Pr) (high definition compatible)
