Bedienungsanleitung Cooper Lighting INVUE IMI-606

Inhaltszusammenfassung zur Seite Nr. 1

TM
Mast Arm Adapter
Sheet 1 of 5
INSTALLATION INSTRUCTIONS
5/26/04 IMI-606
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
General: Upon receipt of fixture thoroughly inspect for any Safety: This fixture must be wired in accordance with
freight damage, which should be brought to the attention of the national electrical code and applicable local codes
the delivery carrier. Compare the catalog description listed and ordinance. Proper grounding is required to ins

Inhaltszusammenfassung zur Seite Nr. 2

TM Mast Arm Adapter Sheet 2 of 5 INSTALLATION INSTRUCTIONS 5/26/04 IMI-606 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. Reflector Connector Reflector Reflector Tabs Fig. 2c Fig. 2b 3. Power Supply Tray Removal - Unscrew the two THUMB SCREWS and swing the POWER SUPPLY TRAY down as shown in Figure 3a. Disconnect the POWER CONNECTOR and the OPTIC CONNEC

Inhaltszusammenfassung zur Seite Nr. 3

TM Mast Arm Adapter Sheet 3 of 5 INSTALLATION INSTRUCTIONS 5/26/04 IMI-606 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 4. Attach Housing to Mast Arm Adapter - Fig. 4a Remove the WIREWAY PLUG from the HOUSING. Move the fixture leads aside so the THREADED RODS may be accessed through the fixture HOUSING. See Figure 4a. Attach the MAST ARM ADAPTER t

Inhaltszusammenfassung zur Seite Nr. 4

TM Mast Arm Adapter Sheet 4 of 5 INSTALLATION INSTRUCTIONS 5/26/04 IMI-606 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 5. Slip the Assembly over the mast arm. Secure Mast Arm Adapter to the mast arm with the four (4) 3/8-16x3/8 Set Screws. Drill a 3/8” hole through the mast arm and install the 3/8” carriage bolt and nut. Use care in drilling hole so a

Inhaltszusammenfassung zur Seite Nr. 5

TM Mast Arm Adapter Sheet 5 of 5 INSTALLATION INSTRUCTIONS 5/26/04 IMI-606 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 6. Buttoning Up - Re-install the POWER SUPPLY TRAY to the HOUSING. Connect the POWER CONNECTOR and OPTIC CONNECTOR. Swing the POWER SUPPLY TRAY up and tighten the two THUMB SCREWS. Re-install the REFLECTOR to the HOUSING. Connect th