Inhaltszusammenfassung zur Seite Nr. 1
APPROVED COPY
®
™
TITAN 70
Charger / Power Supply
OWNER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
APPROVED COPY
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS APPROVED COPY INTRODUCTION ..........................................................................................1 FEATURES....................................................................................................1 SAFEGUARDS..............................................................................................2 GROUNDING/EARTHING...........................................................................2 Charging ...................................
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION APPROVED COPY ™ The TITAN 70 is the smallest and lightest package available in both a charger and ® on-camera power supply. It incorporates all of the Logic Series circuits that are ® employed in every Anton/Bauer charger. The fast charge feature makes it an ideal complement to a current Anton/Bauer battery system and given its small size is ideal for travel. Like all Anton/Bauer chargers, everything is automatic. Once a battery is placed onto the charger, it will autom
Inhaltszusammenfassung zur Seite Nr. 5
APPROVED COPY SAFEGUARDS Power Sources: This unit was designed to operate at mains voltages from 90 to 250 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to qualified service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. GROUNDING/EARTHING IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED. To ensure safe operation, the three pin plug supplied must be inserted only into a standard three-pin power point which is effectively gr
Inhaltszusammenfassung zur Seite Nr. 6
Charging APPROVED COPY As with all Anton/Bauer chargers, charging with TITAN 70 is fully automatic. Mount any Logic Series battery to the TITAN 70 and it will automatically determine and execute the appropriate charge routine. Applications ® The Titan 70 will charge any Anton/Bauer Logic Series Gold Mount battery including ® ® model: ProPac 13/14, Trimpac 13/14, Digital ProPac 13/14, Digital Trimpac 13/14, ® HyTRON, or ProFormer battery. NOTE: Anton/Bauer always recommends that each
Inhaltszusammenfassung zur Seite Nr. 7
Three Stage Charging Methodology APPROVED COPY In general, the TITAN 70 will deliver a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to the capabilities of the battery (typically a one or two hour rate, depending on battery type). During this stage, six separate cutoff methods are in operation, simultaneously, ensuring the fastest, safest charge for that battery: TCO - Temperature cutoff which stops the Stage one charge precisely when
Inhaltszusammenfassung zur Seite Nr. 8
LED Indications APPROVED COPY The TITAN 70 has three LEDs (one red, two green). One green LED indicates AC line voltage status. If the green status LED is steady, then line voltage is present. If the green status LED is flashing, then AC Line voltage has been removed. The red and green LED’s will indicate the charging status of the battery. The following table identifies all of the LED indications and their meaning: LED INDICATION MEANING Alternating Indicates that the TITAN 70
Inhaltszusammenfassung zur Seite Nr. 9
OPERATION AS DC CAMERA SUPPLY FROM MAINS APPROVED COPY The TITAN 70 will automatically operate as a DC power supply once the camera, or other device is turned on. There are no switches, it is fully automatic. The single green LED will light indicating that the unit is operating as a power supply. A battery may be attached to TITAN 70 while mounted to a camera. With the camera OFF, the battery will charge. When camera is turned ON, TITAN 70 will supply power to camera remembering the
Inhaltszusammenfassung zur Seite Nr. 10
FCC NOTICE APPROVED COPY This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio comm
Inhaltszusammenfassung zur Seite Nr. 11
APPROVED COPY LIMITED WARRANTY This one (1) year limited warranty for the product specified in this document is given by Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progress Drive, Shelton, Connecticut 06484. If you have any questions regarding product applications, product specification, or to obtain warranty service on this or any Anton/Bauer product, contact the Anton/Bauer Customer Support Group or the company at the address above. IMPORTANT: WARRANTY REGISTRATION CARD MUST BE MAILED WIT
