Inhaltszusammenfassung zur Seite Nr. 1
JF Series
Video Intercom and
Access Control System
Architectural and Engineering
Specifications
Aiphone JF Series 13710 (28 13 00) - 1
Inhaltszusammenfassung zur Seite Nr. 2
Aiphone JF Series 13710 (28 13 00) - 2
Inhaltszusammenfassung zur Seite Nr. 3
Aiphone Corporation April 2007 1700 130th Avenue NE Bellevue, Washington 98005 Toll Free (800) 692-0200 Phone (425) 455-0510 Fax (425) 455-0071 Website www.aiphone.com E-mail info@aiphone.com Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual —CSI Manual of Practice
Inhaltszusammenfassung zur Seite Nr. 4
Specifier Notes: List standards referenced in this section, complete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used. A. ISO 9001:2000 – Quality Management Systems – Requirements. Specifier Notes: Include the system description for either standard or enhanced video intercom system. Delete system description not required. 1.4 SYSTEM DESCRIPTION – STANDARD VIDEO INTERCOM SYSTEM Specifier Notes: Edit the
Inhaltszusammenfassung zur Seite Nr. 5
Specifier Notes: Edit the system description as required for the project. Consult Aiphone Corporation for more information. A. Answering Door Call in Hands-Free Mode: 1. Press CALL button. 2. Chime tone sounds, caller is seen on video monitor, and outside sound is heard. 3. Audio and video turn off after approximately 45 seconds if not answered. 4. Press TALK button momentarily, and after beep, communicate hands-free. Red transmit LED lights when you talk, and goes off as you liste
Inhaltszusammenfassung zur Seite Nr. 6
3. Reply of other person is not heard. 4. If other person presses TALK button, hands-free communication is possible. 5. Press and release TALK button to end. G. Transfer Entrance Call: 1. During communication with door station, press CALL button to call transferring station. 2. Red CALL button flashes and communication with door station is put on hold. 3. “All Call” function is activated to link all master and sub master stations. 4. If TALK button is pressed at transferred station, uni
Inhaltszusammenfassung zur Seite Nr. 7
2. Press CALL button. If picture is saved, key symbol is displayed. If picture has already been saved, save is cancelled. Each time CALL button is pressed, operation switches between save and cancel. L. Erase Recorded Picture: 1. Display picture that you want to erase in play screen. Press MENU/MEMO button to display save/erase selection screen. 2. Press REC button. 3. Press CALL button to erase. 4. Press PLAY button to stop erasure and return to play screen. Specifier Notes: I
Inhaltszusammenfassung zur Seite Nr. 8
Specifier Notes: Delete the following paragraph if external sensor is not installed. P. External Sensor: 1. When external sensor is activated or call button is pressed, notification sound goes off and red transmit LED flashes. 2. Warning screen is displayed on video monitor. 3. Press TALK button to stop notification sound. 1.6 SUBMITTALS A. Comply with Section 01330 (01 33 00) – Submittal Procedures. B. Product Data: Submit manufacturer’s product data, including installation in
Inhaltszusammenfassung zur Seite Nr. 9
A. Aiphone Corporation, 1700 130th Avenue NE, Bellevue, Washington 98005. Toll Free (800) 692-0200. Phone (425) 455-0510. Fax (425) 455-0071. Website www.aiphone.com. E-mail info@aiphone.com. 2.2 VIDEO INTERCOM AND ACCESS CONTROL SYSTEM Specifier Notes: Edit the following sentence for either standard or enhanced hands-free color video intercom system. A. [Standard] [Enhanced] Hands-Free Color Video Intercom System: Aiphone “JF Series”. Specifier Notes: Include the followi
Inhaltszusammenfassung zur Seite Nr. 10
Specifier Notes: Include the following three sentences for enhanced hands-free color video intercom system only. 10. Picture Memory: a. Record up to 50 image sequences (1 frame per second, 8 frames per image). b. Save up to 10 sequences (80 frames). 11. Voice Memo: Record maximum 3 voice memos (maximum approximately 15 seconds per memo). 12. Message for Entrance: Record maximum 2 messages (maximum approximately 10 seconds per message). B. Door Stations: Specifier Notes: Speci
Inhaltszusammenfassung zur Seite Nr. 11
d. Microphone. e. Speaker. f. Camera: Color CCD with white illuminator LEDs. g. Call button. h. Vandal resistant. i. Weather resistant. j. Operating Temperature: 14 degrees F to 140 degrees F (minus 10 degrees C to 60 degrees C). 5. Fixed Video Door Station: Model JF-DVF-HID-I. a. Smart Card Reader: Embedded “HID iCLASS”. b. Faceplate: Stainless steel. c. Flush mount. d. Microphone. e. Speaker. f. Camera: Color CCD with white illuminator LEDs. g. Call button. h. Vandal resi
Inhaltszusammenfassung zur Seite Nr. 12
i. Video Monitor: 1) 3.5-inch direct-view TFT color LCD. 2) Scanning Lines: 525. j. MENU button with red memo LED. k. POWER switch. l. MONITOR button. m. Red transmit LED. n. TALK button. o. Screen brightness control. p. Receive volume control. q. Chime tone, alert sound volume. r. Call-in Setting Switch: 1) Setting 1: Call-in from door station 1 only. 2) Setting 2: Call-in from door station 2 only. 3) Setting 1 and 2: Call-in from both door stations 1 and 2. s. Operating Temp
Inhaltszusammenfassung zur Seite Nr. 13
d. Calling: Chime tone, approximately 45 seconds. e. Communication: 1) Hands-Free Mode: Voice actuated (VOX), approximately 60 seconds. 2) PTT Mode: Press-to-talk, release to listen, approximately 60 seconds. f. Microphone. g. Speaker. h. Red transmit LED. i. TALK button. j. DOOR RELEASE button. k. Reset switch. l. Chime TONE volume control. m. Operating Temperature: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C). D. Enhanced Master and Sub Master Stations: 1. Ma
Inhaltszusammenfassung zur Seite Nr. 14
Specifier Notes: Specify required sub master station models. Delete sub master station models not required. 2. Sub Master Station: Model JF-2HD. a. Power: 18 V DC. b. Current Consumption: 230 mA maximum. c. Calling: Chime and image, approximately 45 seconds. d. Communication: 1) Hands-Free Mode: Approximately 60 seconds. 2) PTT Mode: Press-to-talk, release to listen, approximately 60 seconds. e. Microphone. f. Speaker. g. Video Monitor: 1) 3.5-inch direct-view TFT color LCD
Inhaltszusammenfassung zur Seite Nr. 15
2.3 ACCESSORIES Specifier Notes: Specify required accessories. Delete accessories not required. Consult Aiphone Corporation for more information. A. Access Control Keypad: Model KVI. 1. Faceplate: Die-cast zinc to match fixed video door station Model JF-DV. B. 30-Degree Angle Box: Model KAW-D. 1. For fixed video door station Model JF-DA. C. 1-Gang Mounting Plate: Model MKW-P. 1. For fixed video door station Model JF-DV. D. Mullion Mounting Bracket: Model KMB-45. 1. Fo
Inhaltszusammenfassung zur Seite Nr. 16
PART 3 EXECUTION 3.1 EXAMINATION A. Examine areas to receive hands-free color video intercom system. B. Notify Architect of conditions that would adversely affect installation or subsequent use. C. Do not begin installation until unacceptable conditions are corrected. 3.2 INSTALLATION A. Install hands-free color video intercom system in accordance with manufacturer’s instructions at locations indicated on the Drawings. B. Mount equipment plumb, level, square, and secure.
