Inhaltszusammenfassung zur Seite Nr. 1
C56 VoIP Phone User
Manual
Cortelco
1703 Sawyer Road
Corinth, MS 38834
USA
www.cortelco.com
Tel: (662)287-5281
Fax:(662)287-3889
Version 1.0
August 14, 2013
Inhaltszusammenfassung zur Seite Nr. 2
Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. Please use the external power supply that is included in the package. Other power supplies may cause damage to the device, affect the behavior or induce noise. Before using the external power supply, please be sure it is for use with your power voltage. Incorrect power voltage may cause fire
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents 1 INTRODUCING C56 VOIP PHONE ............................................................................... 5 1.1 THANK YOU .......................................................................................................................... 5 1.2 BOX CONTENTS .................................................................................................................... 5 1.3 KEYPAD ...................................................
Inhaltszusammenfassung zur Seite Nr. 4
5.3.1.2.3 PPPoE ................................................................................................................................ 16 5.3.1.2.4 Quick SIP Settings ............................................................................................................. 17 5.3.1.3 Call Log ............................................................................................................................. 18 5.3.2 Network ..................
Inhaltszusammenfassung zur Seite Nr. 5
1 Introducing C56 VoIP Phone 1.1 Thank you Thank you for purchasing the C56(P) Voice Over Internet Protocol (VoIP) telephone. The C56(P) is a fully featured telephone that provides voice communication over the data network. This phone has all the features of a traditional telephone and gives access to many data service features. This guide will help you easily use the various features and services available on your phone. 1.2 Box Contents The following i
Inhaltszusammenfassung zur Seite Nr. 6
Redial When off hook, this will dial the last called number. In stand-by mode, it will check the Outgoing Call. Speaker Activate speakerphone mode. phone Indicator This light blinks to indicate a missed call. light Displays phone settings such as phone number, IP address, SYSINFO gateway address, etc. ENTER Used to enter next menu or confirm settings MWI Accesses voice mail system. Performs blind or attended transfers. See Section 3.1.4 f
Inhaltszusammenfassung zur Seite Nr. 7
1.4 Input/Output Ports Port Port name Description Power switch Input: 5V AC, 1A WAN 10/100M Connect to Network LAN 10/100M Connect to PC Handset Port type: RJ-9 connector 2 Initial Connection and Setting 2.1 Connecting the phone 1. Connect to the network. Use the Ethernet cable in the package to connect the WAN port on the back of your phone to an Ethernet port. The following two figures show connection options. 2. Connect the handset to the ha
Inhaltszusammenfassung zur Seite Nr. 8
4. The phone’s LCD screen displays “WAIT LOGON”. Later, a ready screen displays the date, time and current network mode. If your LCD screen displays different information from the above, more information may need to be entered. Please refer to the next section. If your phone registers into your IP telephony Server, it is ready to use. If not, continue to read for more configuration information. 2.2 Network Settings DHCP is supported by default. This all
Inhaltszusammenfassung zur Seite Nr. 9
to switch to PPPoE mode. When the PPPoE icon at the top of the LCD stops blinking, the mode change is complete. 2.2.2 Static IP Mode 1. Press and hold 1 for three seconds. 2. Press ENTER to confirm. 3. Press ENTER. The LCD will display “INPUT PASSWORD”. 4. Input the password (default is 123). 5. Press ENTER. The LCD will display” NETWORK”. 6. Press ENTER. The LCD will display “LAN”. 7. Press UP ARROW. 8. Press ENTER. The LCD will display “STATIC NET”.
Inhaltszusammenfassung zur Seite Nr. 10
41. Press ENTER. The LCD will display “ARE YOU SURE”. 42. Press ENTER. The LCD will display “SAVING NOW” and then display “SAVE”. 43. Press EXIT twice. 44. Press and hold 1 until the LCD displays “ARE YOU SURE”. 45. Press ENTER. The LCD will display “CHANGING”. This means the phone is trying to switch to static IP mode. When the STATIC icon at the top of the LCD stops blinking, the mode change is complete. 2.2.3 DHCP Mode 1. Press and hold 2 until the LCD
Inhaltszusammenfassung zur Seite Nr. 11
confirming it with the # button. 3. Pressing the HOLD button during the second call will resume the first call. 3.4 Call Waiting 1. When a third party calls during an established call, the LCD will display the incoming call number. Press the HOLD key to place the established call on hold and answer the incoming call. 2. Press # to hang up the established call and answer the incoming call. NOTE: Call Waiting service must be enabled. 3.5 Call transfer 3.5.1 B
Inhaltszusammenfassung zur Seite Nr. 12
4.2 MWI(Message Waiting Indication) This LED will flash to indicate a new voicemail. Pressing the MWI key will access the voicemail if the key has been configured correctly. 4.3 Redial / Unredial If B is on a call when A calls, A will get busy tone. If A wants to connect to B as soon as B is available, he can use the redial function. To use this feature, A dials a prefix and then B’s number. When the redial function is activated, A will check B’s calling s
Inhaltszusammenfassung zur Seite Nr. 13
5.1.2 Password Configuration There are two levels of access: root level and general level. A user with root level access can browse and set all configuration parameters, while a user with general level can set all configuration parameters except server parameters for SIP or IAX2. Default user with general level: Username: guest Password: guest Default user with root level: Username: admin Password: admin The default password for the phone s
Inhaltszusammenfassung zur Seite Nr. 14
5.3 Configuration via WEB 5.3.1 BASIC 5.3.1.1 Status Field Name Explanation Network Shows the configuration information for WAN and LAN port, including connection mode of WAN port (Static, DHCP, PPPoE), MAC address, IP address of WAN port and LAN port, DHCP server status for LAN port (ENABLED or DISABLED). Accounts Shows the phone numbers and registration status for the 2 SIP LINES. - 14 -
Inhaltszusammenfassung zur Seite Nr. 15
5.3.1.2 Wizard Select the appropriate network mode. The phone supports three network modes: 1 Static: The parameters of a Static IP connection must be provided by your ISP. 2 DHCP: In this mode, network parameter information will be obtained automatically from a DHCP server. 3 PPPoE: In this mode, you must enter your ADSL account and password. Refer to Section 2.2 for detailed information about configuring the network parameters. - 15 -
Inhaltszusammenfassung zur Seite Nr. 16
5.3.1.2.1 Static IP If Static IP is selected, this screen will be displayed. Information provided by the ISP should be entered. Click Back to return to the Wizard screen. Click Next to go to Quick SIP Settings 5.3.1.2.2 DHCP After selecting DHCP and clicking NEXT, the Quick SIP Settings screen will appear. Click Back to return to the Wizard screen. Click Next to go to the Summary screen. 5.3.1.2.3 PPPoE If PPPoE is selected, this screen will appear. E
Inhaltszusammenfassung zur Seite Nr. 17
5.3.1.2.4 Quick SIP Settings Field Name Explanation Display Name The name shown in caller ID. Server Address SIP server address either IP address or URI. Server Port SIP server port (usually 5060). Authentication User Login name or Authentication ID. Authentication Password SIP password. SIP User Phone number. Enable Registration Submits registration information. Normally checked. Click Back to return to the IP Address screen. Click Next to see summary
Inhaltszusammenfassung zur Seite Nr. 18
5.3.1.3 Call Log Outgoing call logs can be seen on this page. Field Name Explanation Start Time Start time of the outgoing call Duration Duration of the outgoing call. Dialed Calls Account, protocol, and line of the outgoing call. 5.3.2 Network 5.3.2.1 WAN Config Field Name Explanation Active IP Address The current IP address of the phone. Current Subnet Mask The current Subnet Mask. Current IP Gateway The current Gateway IP address. MAC Address Th
Inhaltszusammenfassung zur Seite Nr. 19
5.3.2.1.1 Static IP If Static IP is chosen, the screen below will appear. Enter values provided by the ISP. 5.3.2.1.2 DHCP If DHCP is chosen, all configuration information will be provided by a DHCP server. Contact the ISP to determine if DHCP is used. 5.3.2.1.3 PPPoE If PPPoE is chosen, the screen below will appear. Enter the information provided by the ISP. Service Name IP Address or name of DSL Server User DSL User Name or Login ID Password DSL Pas
Inhaltszusammenfassung zur Seite Nr. 20
Chart 1 shows a network switch with no VLAN. Any broadcast frames will be transmitted to all other ports. For example, and frames broadcast from Port 1 will be sent to Ports 2, 3, and 4. Chart 2 shows an example with two VLANs indicated by red and blue. In this example, frames broadcast from Port 1 will only go to Port 2 since Ports 3 and 4 are in a different VLAN. VLANs can be used to divide a network by restricting the transmission of broadcast frames
