Inhaltszusammenfassung zur Seite Nr. 1
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S7110
(Vista OS)
Document Date: 03/30/2007
Document Number: FPC58-1647-01
FUJITSU COMPUTER SYSTEMS CORPORATION
1
Inhaltszusammenfassung zur Seite Nr. 2
LifeBook S Series Notebook BIOS Navigating through the Setup Utility S Series BIOS The BIOS setup utility consists of six menus: Main, BIOS SETUP UTILITY Advanced, Security, Boot, Info and Exit. This document explains each menu in turn including all submenus and The BIOS Setup Utility is a program that sets up the setup items. operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, The following procedures allow you to navigate the therefo
Inhaltszusammenfassung zur Seite Nr. 3
Main Menu settings of the setup utility, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press key to continue, to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. ■ If your notebook emits a series of beeps that sounds like
Inhaltszusammenfassung zur Seite Nr. 4
▲ ▲ ▲ LifeBook S Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. (See Navigating through the Setup to help understand the field’s use. Note that the actual Utility on page 2 for more information) drive labels shown may vary. The following tables show the names of the menu fields System time and date can also be set from for the Main menu and i
Inhaltszusammenfassung zur Seite Nr. 5
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description Drive0 Selects the Drive0 The product Display the type of device on this ATA/IDE interface. Pressing the Serial ATA drive number of the Enter key selects the Serial ATA Drive0 submenu allowing additional submenu hard drive. device configuration options for this interface. Drive1: Selects the Drive1 The product Display the type of device on this ATA/IDE interface, if there is one. Serial AT
Inhaltszusammenfassung zur Seite Nr. 6
▲ LifeBook S Series Notebook BIOS Drive0 Submenu of the Main Menu The Drive0 submenu identifies what Serial ATA/IDE Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Drive0 [FUJITSU MHV2080BH PL] Item Specific Help Type: [Auto] Select Serial ATA/IDE LBA Format drive installed here. Total Sectors: 156301488 Ma
Inhaltszusammenfassung zur Seite Nr. 7
▲ Main Menu Drive1 Submenu of the Main Menu The Drive1 submenu allows you to configure secondary Note that actual optical drive label shown may vary. ATA devices. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Drive1 [HL-DT-ST DVDRAM GMA4082Nj] Item Specific Help Type: [Auto] Select ATA/IDE drive installed here. Multi-Sector Transfers: [Disabled] [Auto] LBA Mode Control: [Disabled] T
Inhaltszusammenfassung zur Seite Nr. 8
LifeBook S Series Notebook BIOS Table 4: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu Menu Field Options Default Description ■ Transfer Mode: Standard [Standard] Selects the method for moving data to/from the drive. Autotype the ■ drive to select the optimum transfer mode. This option cannot be Fast PIO 1 ■ changed when Auto is selected. Fast PIO 2 ■ Fast PIO 3 ■ Fast PIO 4 ■ Multiword DMA 1 ■ Multiword DMA 2 ■ Ultra DMA Disabled [Disabled] Selects the method for moving
Inhaltszusammenfassung zur Seite Nr. 9
▲ ▲ ▲ ▲ ▲ ▲ ▲ Advanced Menu ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS ■ The Advanced Menu allows you to: Configure DMI Event Logging. ■ Set the I/O addresses for the serial and parallel ports when a port replicator is used. (See Navigating through the Setup Utility on page 2 for ■ Set the features of the keyboard/mouse. more information) ■ Select between the display panel and/or an external The following tables show the names of the menu fields CRT display. ■ for the Advanced Menu and
Inhaltszusammenfassung zur Seite Nr. 10
LifeBook S Series Notebook BIOS Table 5: Fields, Options and Defaults for the Advanced Menu Menu Field Description Internal Device When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the Configurations modem, IDE, and LAN Controllers. CPU Features When selected, opens the CPU Features submenu, which allows you to change the Intel(R) SpeedStep(R) Technology settings. USB Features Configures USB features. Miscellaneous Configures miscellaneous featu
Inhaltszusammenfassung zur Seite Nr. 11
▲ Advanced Menu Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu lets you ■ To prevent IRQ and address conflicts, set the I/O addresses and interrupt levels for the serial, avoid changing the default settings. If infrared and parallel ports of your notebook. you must change the settings, you can call 1-800-8Fujitsu for technical assis- I/O addresses, DMA channels and tance. Interrupt levels can be entered in various ■ If your
Inhaltszusammenfassung zur Seite Nr. 12
LifeBook S Series Notebook BIOS Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Serial Port: Disabled [Enabled] Configures the serial port using either no configuration (Disabled), ■ a user defined configuration (Enabled), or by allowing the BIOS or Enabled ■ OS to choose the configuration (Auto). Auto ■ Base I/O Address/IRQ: 3F8/IRQ 4 [3F8/IRQ 4] Allows user to set the serial port base I/O addre
Inhaltszusammenfassung zur Seite Nr. 13
▲ Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help [On] or [Off] Numlock: [Auto] Numlock is On or Off. Hot Plug: [Enabled] [On/Padlock Off] Internal Pointing Device: [Auto Disabled] Numlock is On, but use Initialization on Resume: [Fast] with [
Inhaltszusammenfassung zur Seite Nr. 14
▲ LifeBook S Series Notebook BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto] Select display terminal. Compensation: [Enabled] * This setting is not effective after operating system starts up. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Sa
Inhaltszusammenfassung zur Seite Nr. 15
▲ Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Internal Device Configurations [Disabled] Serial ATA Controller: [Enabled] Serial ATA port is AHCI Configuration: [Enabled] disabled. IDE Contoller: [Enabled] Bluetooth(R): [Enabled] [Enabled] LAN Controller: [Enabled] Serial
Inhaltszusammenfassung zur Seite Nr. 16
▲ LifeBook S Series Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows you to change the settings for Intel(R) SpeedStep(R) Technology for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help [Enabled] Core Multi-Processing: Select Core Multi-Processing SpeedStep(R) Technology: [Enabled] enabled or disabled. On Battery: [Battery Optimized] On AC: [Maximum Perform
Inhaltszusammenfassung zur Seite Nr. 17
Advanced Menu Table 10: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description ■ XD Bit Enabled] [Enabled] Allows the user to enable and disable the Execute Disable ■ functionality: Disabled Bit functionality. Execute Disable Bit allows the processor to classify areas in memory where application code can and cannot execute. In the event an internet worm attempts to insert code in the buffer, the processor disables code execution
Inhaltszusammenfassung zur Seite Nr. 18
▲ LifeBook S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu enables and disables legacy USB support for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Enabled] Legacy USB Support: [Disabled] SCSI SubClass Support: [Enabled] The feature is disabled. [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Ite
Inhaltszusammenfassung zur Seite Nr. 19
▲ Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures the miscellaneous features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Miscellaneous Configurations Configures the power Power Button: [Disabled] button. Wake up on LAN: [Disabled] Force LAN Boot: [Disabled] *ACPI OS ignores this Volume Setting: [Middle] setting. UMA Video Memory Size: [128M
Inhaltszusammenfassung zur Seite Nr. 20
LifeBook S Series Notebook BIOS Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Options Default Description ■ UMA Video 64MB [128MB] Allows you to select the maximum shared video memory size. Video ■ Memory Size: memory is dynamically allocated as needed for running applications by 128MB ■ Dynamic Video Memory Technology (DVMT). 224MB ■ Hardware Power Disabled [Enabled] Enables or disables the Hardware Power Management feature. ■ Management: Enab
