Inhaltszusammenfassung zur Seite Nr. 1
setup guide integration tools
®
SIM 3 Remote
Guide to controlling a SIM 3 Audio Analyzer remotely
over a network connection from a laptop
Inhaltszusammenfassung zur Seite Nr. 2
© 2010 Meyer Sound. All rights reserved. SIM 3 Remote Setup Guide, PN 05.136.042.01 B The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be con- strued as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be reproduced, stored i
Inhaltszusammenfassung zur Seite Nr. 3
Contents section 1: overview 1 What is SIM 3 Remote? 1 section 2: preparation 2 Acquiring the Software CD and X11 Utilities 2 Network Infrastructure / Hardware Error Handling Change 3 section 3: setup 6 Wireless Router Setup 6 Physical Setup With Router 8 Physical Setup Without Router 10 section 4: starting siM 3 remote 11 Starting SIM 3 Remote (OS X – All Physical Setups) 11 First Time Setup (Windows – All Physical Setups) 12 Starting SIM 3 Remote (Windows – All Physical Setups) 13 Frequently
Inhaltszusammenfassung zur Seite Nr. 4
sim 3 remote artup Guide st seCtion 1: overview what is siM 3 reMote? SIM 3 Remote is an application that makes it possible to control SIM 3 hardware on a remote computer via an Ethernet network. Before using SIM 3 Remote it is important to note that SIM 3 Remote is not a standalone measurement software and does not do anything without connection to actual SIM 3 hardware. For simplicity we will refer to the siM 3 machine as the local computer and the laptop/desktop as the remote computer. SI
Inhaltszusammenfassung zur Seite Nr. 5
section 2: tionaraprep seCtion 2: preparation aCquiring the soFtware Cd and X11 utilities Before you get started you will need to download some files and you will need to have one blank recordable CD (CD-R) available to burn the Software CD. Meyer sound software Cd File(s) downloads: www.meyersound.com/products/sim/sim3/remote/SIM3_1.7.2_Remote_IP_192.168.1.160.iso (ISO image for 192.168.1.160) www.meyersound.com/products/sim/sim3/remote/SIM3_1.7.2_Remote_IP_192.168.1.161.iso (optional - I
Inhaltszusammenfassung zur Seite Nr. 6
sim 3 remote artup Guide st network inFrastruCture / hardware error handling Change network infrastructure In order to setup SIM 3 Remote an Ethernet 100Mbps or faster network needs to be created. While it is much easier to have this set as a wired network SIM 3 Remote really becomes much more flexible when used in a wireless network. To set up a wireless network the following equipment will be required: • Wireless router capable of 802.11g or better (Linksys WRT-54GC) • CAT5 or better cablin
Inhaltszusammenfassung zur Seite Nr. 7
section 2: tionaraprep Step 2: Use the up/down arrow keys to select “POST Error Handling” Use the right/left arrow keys to change the setting to “Ignore All” Step 3: Press to return to the Main Menu. Use the up/down arrow keys to select “Saving the Settings” and press . Step 4: Pr ess to continue. Y ou will be r etur ned to the Main Menu. 4 4
Inhaltszusammenfassung zur Seite Nr. 8
sim 3 remote artup Guide st Step 5: Use the up/down arrow keys to select “Exiting the System Setup Utility” Press . Step 6: Press while “Exit the System Setup Utility” is highlighted to exit the BIOS setup. The SIM 3 will now reboot with the new setting applied. 5 5
Inhaltszusammenfassung zur Seite Nr. 9
section 3: setup seCtion 3: setup wireless router setup 1. Enter the router basic setup page (refer to router user guide) and set the following parameters: • Router IP address to 192.168.1.1 • Subnet Mask to 255.255.255.0 • DHCP Enabled • Router DHCP starting IP address to 192.168.1.210 • Maximum number of DHCP users to 10 Remember to click the Save Settings button in order to implement these changes. If the IP address of the router is changed you will need to reconnect. note: Example rou
Inhaltszusammenfassung zur Seite Nr. 10
sim 3 remote artup Guide st 2. Go to the Wireless Setup / Basic Wireless Settings page and set the following parameters: • Mode to G-only. (If both router and remote computer are capable of 802.11n then N-only should be selected. Using 802.11b will result in a very slow connection so unless it is the only available possibility it should be avoided.) • Router SSID to MSLI • Disable SSID broadcast Remember to click the Save Settings button in order to implement these changes. 3. Go to the Wire
Inhaltszusammenfassung zur Seite Nr. 11
section 3: setup physiCal setup with router 1. Connect the computer to the router using any of the LAN ports available (e.g. port 1) with a CAT5 or better cable or connect to the wireless network with SSID MSLI. Connect the SIM 3 hardware Ethernet connector on the back panel to any of the LAN ports (e.g. port 2) on the wireless router using a CAT5 or better cable. Wireless CAT5 or CAT5 2. V erify the pr operties of the r emote computer’ s Ether net adapter . Make sur e it is set for IP add
Inhaltszusammenfassung zur Seite Nr. 12
sim 3 remote artup Guide st 3. Power up the SIM 3 machine and immediately insert the Software CD (See page 4) into the CD drive of the SIM 3 machine. This must be done the moment the SIM 3 is turned on. If the SIM 3 boots up as usual then the CD was introduced too late. This is not a problem. Just power down the SIM 3 down (by holding the power button) without removing the CD. The next time it powers up it will automatically boot from the CD drive. The SIM 3 machine will boot and present a
Inhaltszusammenfassung zur Seite Nr. 13
section 3: setup physiCal setup without router In order to operate a SIM 3 machine remotely without using a wireless router connect the computer to the SIM machine with a CAT5 or better cable. Modern computers automatically apply an internal crossover when necessary – if using an older computer please use a crossover cable. CAT5 1. Power up the SIM 3 machine and immediately insert the Software CD (See page 4) into the CD drive of the SIM 3 machine. This must be done the moment the SIM 3 is tu
Inhaltszusammenfassung zur Seite Nr. 14
sim 3 remote artup Guide st seCtion 4: starting siM 3 reMote starting siM 3 reMote (os X – all physiCal setups) 1. Open the application X11 (Applications/Utilities/X11) 2. At the prompt bash-3.2$ type the following commands (all commands are case sensitive): bash-3.2$ ssh –XC root@192.168.1.160 3. When prompted if you want to connect to the computer 192.168.1.160 (this will only happen the first time you connect), type: bash-3.2$ yes 4. Y ou will then be asked to type a p
Inhaltszusammenfassung zur Seite Nr. 15
section 4: startinG sim 3 remote First tiMe setup (windows – all physiCal setups) Depending on your Windows version and security settings you may be prompted to confirm/allow some of the following actions. 1. Copy both Xming-6-9-0-31-setup.exe and PuTTY.exe to your desktop 2. Install Xming on your computer with all of the default options. 3. Start Xming from the Start Menu. 4. Start PuTTY by double clicking on the executable file (no installation r equir ed). 5. In PuTTY perform the follow
Inhaltszusammenfassung zur Seite Nr. 16
sim 3 remote artup Guide st starting siM 3 reMote (windows – all physiCal setups) Once First Time Setup (see Page 13) is complete the normal startup procedure is as follows: 1. Start Xming 2. Start PuTTY 3. Open the previsously saved session (Load/Open) 4. In the PuTTY terminal window type the following commands (all commands ar e case sensitive): Login as: root 5. Y ou will then be asked to type a passwor d, type: root@192.168.1.160’s password: root The prompt will then
Inhaltszusammenfassung zur Seite Nr. 17
section 4: startinG sim 3 remote Frequently asked uestions (F q aq) q: Can SIM 3 Remote run without a SIM 3 machine? a: No! SIM 3 Remote is just a connection to the SIM 3 software inside a physical SIM 3 machine. q: Can I have more than one simultaneous session of SIM 3 Remote using just one SIM 3 machine? a: No. However, it is possible to use different computers, one at a time, with one SIM 3 machine for SIM 3 Remote without having to reboot the SIM 3 machine. To do so a running SIM 3 Remot
Inhaltszusammenfassung zur Seite Nr. 18
Meyer Sound Laboratories, Inc. 2832 San Pablo Ave Berkeley, CA 94702 Tel: +1 510-486-1166 www.meyersound.com © 2010 T: +1 510 486.1166 Meyer Sound Laboratories, Inc. F: +1 510 486.8356 05.136.042.01 B
