Bedienungsanleitung Lanzar Car Audio AQTB8

Inhaltszusammenfassung zur Seite Nr. 1

Mounting the subwoofer
1. Find a suitable location in the vehicle in which to mount the amplifier.
A typical location is shown below:
2. Make sure there is sufficient air circulation around the intended mounting location.
3. Mark the location for mounting hole screws by positioning the cabinet where you
wish to install it. Make a small mark to identify the position and remove the unit.
AQTB8
Thoroughly dean the area you plan to attach the subwoo1er, using a vacuum deaner.
Then attach the

Inhaltszusammenfassung zur Seite Nr. 2

AQTB8 AQTB8 8” 1000 Watts Low-Profile Super Slim Active Amplified Marine/Waterproof Subwoofer System 1000

Inhaltszusammenfassung zur Seite Nr. 3

AQTB8 AQTB8 AQTB8

Inhaltszusammenfassung zur Seite Nr. 4

Rear panel controls and features Front panel controls and features 6 • • • ..... . • 4 CD POWER ON LED INDICATOR @ PHASE SHIFT Use this switch to help compensate for time alignment problems in the system. Such problems usually result from having the subwoofer at a CDLOW LEVEL RCA INPUTS different distance from the listener than the other speakers in the system. Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA outputs are present on you