Bedienungsanleitung Audio-Technica ES933PMWC

Inhaltszusammenfassung zur Seite Nr. 1

DISTANCE “X”
S T AN 2 TIMES “X”
LES H
ES933PMC & ES933PMWC
®
engineered sound microphones
Cardioid Condenser Hanging Microphones
Installation and Operation
The ES933PMC requires 11V to 52V phantom power for operation.
A uniform 120° angle of acceptance provides well-balanced audio pickup. The
microphone should be located forward of the front-most source, above the
rear-most source, and “aimed” between them (Fig.1). Increasing the height of
the mic above the sources will tend to equalize sound

Inhaltszusammenfassung zur Seite Nr. 2

333 ES933PMC & ES933PMWC Connect the TA3F-type connector from the microphone's cable to the TA3M- Specifications type connector in the power module plate. Element Fixed-charge back plate, permanently polarized condenser Note: Audio-Technica has developed a special RFI-shielding mechanism that is Polar pattern Cardioid ® an integral part of the connectors in the Engineered Sound line. If you remove Frequency response 30-20,000 Hz or incorrectly replace the connector, you may adversely affect t