Inhaltszusammenfassung zur Seite Nr. 1
™
Gyration Ultra Cordless Optical Mouse
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
PRODUCT SPECIFICATIONS Spec Ultra Cordless Optical Mouse RF Receiver System IBM compatible PCs running Windows 98 (Second Edition), 2000, ME, XP, or higher Requirements Available USB port CD ROM drive (for GyroTools installation on Windows only*) Microsoft or Mac compatible mouse driver (no additional drivers to install) Size 4.8"L x 2.0"W x 1.8"H (12.2cm x 5.1cm x 3.15"L x 2.85"W x 4.5cm) .73"H (8cm x 7.2cm x 1.8cm) Weight 5.3 oz (150g) with battery pack 2.16 ounces (67.2g) Operating U
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS Ultra Mouse .........................................................................1 Key Features ................................................................... 1 Installing and Charging the Batteries .................................. 1 Setting Up and Synchronizing ............................................ 4 Determining the Channel................................................... 5 Changing the Channel....................................................... 5 Poweri
Inhaltszusammenfassung zur Seite Nr. 4
Gyration Ultra Cordless Optical Mouse Welcome to a world of unprecedented freedom in surfing, gaming, and mobile computing! Gyration’s Gyro technology delivers the ultimate PC remote control device: the Ultra Mouse. Gyration's patented motion-sensing and radio fre- quency technologies provide accurate and effortless cursor control from anywhere in the room. Since the Ultra Mouse works on a desktop as well as in the air, sit back and relax. You have the power to control your multimedia and
Inhaltszusammenfassung zur Seite Nr. 5
The Ultra Mouse comes with a NiMH battery pack already installed, but you will need to remove the plastic tab located inside the battery compartment. This clear plastic tab pre- vents the battery from discharging until you are ready to use your mouse. To remove the tab and charge your batteries: 1. Press the Battery Release button at the bottom of the mouse and lift the NiMH battery pack off. 2. Remove and discard the plastic tab. 3. Replace the battery pack by snapping it into place on the
Inhaltszusammenfassung zur Seite Nr. 6
Using the In-Line Battery Charger The In-Line Battery Charger is included with the Ultra Profes- sional model or available for purchase as an add-on accessory. To charge the NiMH battery pack using the in-line battery charger: 1. Connect the power adapter to the in-line battery charger and plug it into a power source. 2. Place the battery pack in the charger and the LED Indicator light will turn solid green. 3. To eliminate the need of one additional adapter, install the smaller connector
Inhaltszusammenfassung zur Seite Nr. 7
Setting Up and Synchronizing the Ultra Mouse and the Gyration RF Receiver When installing the Ultra Mouse for the first time or when add- ing additional Gyration devices to the system, it is necessary to perform a Teach/Learn sequence to synchronize the devices. To set up and synchronize the Ultra Mouse and the RF Receiver: 1. Ensure the mouse is fully charged. 2. Connect the receiver cable into an available USB port and power on your computer. Your operating system should detect the new h
Inhaltszusammenfassung zur Seite Nr. 8
Therefore when adding a new device to a system, it is neces- sary to put the receiver into Learn Mode and then press the Teach button on all the devices that will be used on the sys- tem. After the Teach/Learn sequence is performed, the receiver and device(s) will remain synchronized after powering down and/or changing channels. It is only necessary to perform the Teach/Learn sequence when setting a device up for the first time or when adding additional devices to the system. Determining Wh
Inhaltszusammenfassung zur Seite Nr. 9
If you are installing three or more devices on a single receiver, see “Installing 3 or More Devices” on page 12. Remember if a Teach/Learn sequence has already been performed, it is not necessary to re-synchronize the devices after a channel change. To change the channel: 1. Press and hold the Channel button on the bottom of the mouse handset for two seconds. 2. When you release the Channel button, the mouse will change to the next sequential channel and the green LED on the top of the
Inhaltszusammenfassung zur Seite Nr. 10
Using the Ultra Mouse on the Desktop The Ultra Mouse provides great flexibility in how you control your computer, and its optical sensor allows for precise tracking on virtually any surface. However for optimal performance, avoid highly reflective glass or mirrored surfaces. To use on the desktop: 1. Set up and synchronize the mouse with the receiver (see “Setting Up and Synchronizing the Ultra Mouse and the Gyration RF Receiver” on page 4). 2. Remove the mouse from the charging cradle
Inhaltszusammenfassung zur Seite Nr. 11
1. Set up and synchronize the mouse with the receiver (see “Setting Up and Synchronizing the Ultra Mouse and the Gyration RF Receiver” on page 4). 2. Hold the mouse in a comfortable, relaxed position with your index finger on the Activation Trigger and your thumb at the base of the Scroll Wheel (see illustration). 3. Press and hold the Activation Trigger with your index finger. While holding the trigger, flex your wrist up, down, and sideways (in a manner similar to using a flashlight). T
Inhaltszusammenfassung zur Seite Nr. 12
Acceleration – Low or Off. Note: Refer to your operating system’s documentation for additional information on customizing your mouse properties. GyroTools Software GyroTools is a suite of software tools that enhance the func- tionality of the Ultra Mouse. Assign your favorite tools to but- tons on the Ultra Mouse, and put advanced presentation techniques at your fingertips. 1. To install the GyroTools software, insert the GyroTools disk into your CD drive and follow the on-screen instruc- t
Inhaltszusammenfassung zur Seite Nr. 13
c. Drag the tool onto the icon square next to the button that you wish to assign the tool to and release the button. 5. To assign tools using the Menu-Driven Method: a. Right-click the icon square next to the thumb button that you wish to assign. b. Select the New Tool or Replace Tool menu com- mand. c. Select the tool group (such as General, Internet, or Media located at the bottom of the GyroTools win- dow) that contains the tool(s) you want to assign. d. Select the desired tool from the m
Inhaltszusammenfassung zur Seite Nr. 14
Gyration RF Receiver Learn Button Pressing the Learn button for two seconds puts the receiver into Learn Mode allowing you to synchronize one or more devices with the receiver. After the devices have been synchronized, pressing the Learn button again for two seconds takes the receiver out of Learn Mode. If the receiver is not manually taken out of Learn Mode, it will automatically return to Normal Mode after five minutes. Status Light The Status light displays useful information about the
Inhaltszusammenfassung zur Seite Nr. 15
Mode and no devices are transmitting. Blinks slowly (one blink per second) when the receiver is in Learn Mode and is awaiting a Teach instruction from a device. Flickers rapidly when the receiver is operating in Normal Mode and a synchronized device is transmitting. If there is radio interference, the flickering light will be inconsistent. Blinks rapidly for a four-second burst when it is in Learn Mode processing a Teach instruction, and synchronizing the receiver with the device. Keyb
Inhaltszusammenfassung zur Seite Nr. 16
channels be separated by at least one unused channel. For example, setting the channels to “2” and “4” is recommended over setting the channels to “2” and “3”. Any of the devices installed on one channel may be used simultaneously with any of the devices on the other channel. Two devices that share a channel may be used alternately. When installing the devices try to determine which devices will be used simultaneously and set them on opposite channels. Example: Mouse One is used by a pre
Inhaltszusammenfassung zur Seite Nr. 17
Ultra Mouse Troubleshooting Tips Symptom Reason Solution Mouse LED comes on Mouse and Receiver Perform a Teach/Learn sequence when activate button not synchronized (see “Setting Up and Synchroniz- is pressed, but ing the Ultra Mouse and the Gyra- receiver is unrespon- tion RF Receiver” on page 4). sive When using in air, cur- Gyro not activated Squeeze or double-click trigger on sor is visible but shows bottom of mouse. no movement Cursor movement is Radio interference Change the device’s ch
Inhaltszusammenfassung zur Seite Nr. 18
Regulatory Information Attention! This device emits radio frequencies and has not been certified by the FAA for use onboard aircraft. Do not use this device at any time onboard civil aircraft. To minimize the possibility of interference, power off the Ultra Mouse to ensure the device remains off during flight. FCC Statement The Ultra Cordless Optical Mouse and RF Receiver have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
Inhaltszusammenfassung zur Seite Nr. 19
The Compact Keyboard operates in the frequency band of 49.825 to 49.895 MHz with RF output power of less than 30 MicroWatts EIRP (Effective Isotropic Radiated Power). Warning: Using these products in any way other than as described in this manual or altering the antenna in any way may violate FCC rules. FCC ID: JJ4-GP221-001 Compact Keyboard; Receiver: AS00262-001 DECLARATION OF CONFORMITY We GYRATION, INC. 12930 Saratoga Avenue, Suite C Saratoga, CA 95070 Phone 408-255-3016 D
Inhaltszusammenfassung zur Seite Nr. 20
Contacting Gyration If you have any questions on your new Gyration product, please contact us. Main Office Gyration, Inc. Phone: 408-255-3016 Fax: 408-255-9075 Sales Phone: 800-316-5432 (Toll-free in US and Canada) Fax: 408-387-5130 E-mail: sales@gyration.com Technical Support Phone: 408-973-7086 Fax: 408-973-7669 E-mail: support@gyration.com Product Support: www.gyration.com/support.htm World Wide Web www.gyration.com Technical Support-UK Phone: 0870 442 8669 E-mail: uksupport@gyration.com Te
