Bedienungsanleitung Grace MINI-BULLETS II GDI-AQBLT300

Inhaltszusammenfassung zur Seite Nr. 1

User’s Guide
____________________________________________

Mini-Bullets II
Wireless 900MHz Speaker System





Mini-Bullets II 900MHz Wireless Speaker System
Model: GDI-AQBLT300 /AQBLT31

Inhaltszusammenfassung zur Seite Nr. 2

IMPORTANT: Please read your User’s Guide before using your system INTRODUCTION Your MINI-BULLETS II speaker is designed using the latest wireless technology to enjoy audio anywhere inside or outside your home. Simply connect the desired audio source (Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player) to the speaker transmitter. IMPORTANT SAFETY INSTRUCTIONS 1. Read & keep these instructions. 2. Keep these instructions. 3. Follow all warnings and cautions 4. Do not use this appa

Inhaltszusammenfassung zur Seite Nr. 3

FEATURES 1. Automatic PLL (Phases Lock Loop) scanning system on speaker receivers. 2. PLL (Phase Lock Loop) transmitter transmission system. 3. 900 MHz RF (Radio Frequency) technology 4. Weather-proof style for outdoor / indoor speaker system use 5. RF technology lets you place the rock speaker freely anywhere in your garden 6. Operate up to 150 feet 7. No line of sight limitation 8. Auto ON/OFF control on transmitter 9. Auto tuning function on the speaker 10. Optional transmitter A

Inhaltszusammenfassung zur Seite Nr. 4

1. Batteries Compartment 3. Handle 5. Volume Up 7. Power 2. DC IN (power adapter) Jack 4. Auto Tune 6. Volume Down ON/OFF SET UP TRANSMITTER 1. Connect the AC power adaptor included with your unit to electrical wall outlet. 2. Plug the AC power adaptor included with your unit in the jack located on the rear of the transmitter. Option 4 X “AA” size ALKALINE batteries can be used to power the transmitter for portability. NOTE: ensure battery polarity (+/-) are matched and c

Inhaltszusammenfassung zur Seite Nr. 5

red POWER LED will illuminate together. If the blue SIGNAL LED does not illuminate, ensure the audio source is turned on and properly connected to the jack. SPEAKER (RECEIVER) 1. Connect the 12V power adaptor to the DC input jack on the bottom of each speaker, then plug into the power wall outlet. You may also insert 6 x ‘AA’ size ALKALINE batteries into the battery compartment. Ensure the batteries polarity (+/-) are correct, at the bottom of the speakers (batteries not included i

Inhaltszusammenfassung zur Seite Nr. 6

When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. The POWER LED will illuminate steadily once connected. Keep a distance of the speaker up to 7 meters apart from transmitter, and then press “SCAN” AUTO TUNE button for best tuning reception. You should now be able to place the speakers freely from room to room without disruption. Should you experience a “frequency jam”, adjust the channels by switch from one channel to the o

Inhaltszusammenfassung zur Seite Nr. 7

- Ensure the speaker is switch ON. - Speaker’s battery capacity is low, connect the AC/DC adaptor to the speaker. - Ensure the TV or audio component is ON. - The volume of speaker is too low, adjust the volume to an appropriate level. DISTORTED SOUND - Press the “AUTO-TUNE” button on the speakers to find the transmitter frequency - Check there is not Too much water retention inside the speaker grill. Turn over the speaker and let the water drain out from the speaker grill. - Cha

Inhaltszusammenfassung zur Seite Nr. 8

P.7