Bedienungsanleitung Kenwood HERE2ANYWHERE KPA-H2H

Inhaltszusammenfassung zur Seite Nr. 1

Inhaltszusammenfassung zur Seite Nr. 2

Box contents Safety precautions Unpack your KPA-H2H kit carefully and make sure that everything listed here is present: Caution 1 x Cradle 1 x Base 1 x Antenna Take the following precautions to keep the unit in proper working order: • Installation must be performed according to this installation manual. Kenwood is not responsible for issues arising from installations not performed according to the procedures in this

Inhaltszusammenfassung zur Seite Nr. 3

Installation in a home Installation in a home (continued) Note: Do not put Here Anywhere in the docking station until you have completed the installation. 2 3. Plug the AC cord into the power supply, then plug the power supply into 4. Plug the antenna into the back of the docking sta- 1. Using the provided screw, 2A. Plug the audio cable’s mini 2B. Plug the audio cable’s white the back of the docking station, as shown. Don’t plug the AC cord into tion until it is firmly seated, as shown. assemb

Inhaltszusammenfassung zur Seite Nr. 4

Installation in a home: Placing the antenna 3. Due to the moving paths of the SIRIUS satellites, it is possible for the signal to change over time. In most cases, signal should 5. For best reception of the satellite signal, place the included obstructions. (This is especially important if your house has an be available continuously, however, it may be temporarily blocked in some antenna locations in home installations. Be sure to antenna near a window. Use the map on page 7 as a general extended

Inhaltszusammenfassung zur Seite Nr. 5