Inhaltszusammenfassung zur Seite Nr. 1
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-81K
8x1 UXGA/Audio Switcher
P/N: 2900-000387 Rev 3
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1 DDC Support 4 3.2 Defining EDID 4 3.3 Defining the VP-81K 8x1 UXGA/Audio Switcher 4 3.4 Using the IR Transmitter 7 4 Installing in a Rack 8 5 Connecting the VP-81K 9 5.1 Connecting the Balanced/Unbalanced Stereo Audio Output 10 5.2 Controlling via RS-232 11 5.3 Connecting a PC or Controller to the RS-485 Port 12 5.4 Controlling the VP-81K via the Ethernet Port 12 5.5
Inhaltszusammenfassung zur Seite Nr. 4
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Ampl
Inhaltszusammenfassung zur Seite Nr. 5
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual Use Kramer high performance high resolution cables Use only the power cord that is supplied with this machine Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware i upgrades are available (where appropriate). 2.1 Achie
Inhaltszusammenfassung zur Seite Nr. 6
3 Overview The VP-81K is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit can switch any one of eight inputs to two identical video outputs, one balanced and one unbalanced stereo audio outputs. The VP-81K features: • Very high video bandwidth, ensuring transparent UXGA performance • Audio-follow-video (AFV) in which all operations relate to both the video and the audio channels, or
Inhaltszusammenfassung zur Seite Nr. 7
3.1 DDC Support When establishing a VGA connection between a PC or laptop and a display device, a set of parameters known as EDID is exchanged between them, which is carried over the DDC channel. In some PC graphic cards and laptops, this information exchange is essential for proper VGA OUT operation. 3.2 Defining EDID The Extended Display Identification Data (EDID) is a data-structure provided by a display, to describe its capabilities to a graphics card (that is connected to the disp
Inhaltszusammenfassung zur Seite Nr. 8
VP-81K – Overview 5 Figure 1: VP-81K 8x1 UXGA/Audio Switcher Front Panel # Feature Function 1 POWER Switch Illuminated switch supplying power to the unit 2 IR Receiver The yellow LED is illuminated when receiving signals from the Kramer Infrared remote control transmitter 3 INPUT SELECTOR Buttons Select the input (from 1 to 8) to switch to the outputs The button illuminates in red if it is selected and there is no input signal The button illuminates in green if it is not selected bu
Inhaltszusammenfassung zur Seite Nr. 9
6 VP-81K – Overview Figure 2: VP-81K 8x1 UXGA/Audio Switcher Rear Panel # Feature Function 8 INPUT 15-pin HD Connectors Connect to the UXGA sources (from 1 to 8) 9 OUTPUT 15-pin HD Connectors Connect to the UXGA acceptors (from 1 to 2) 10 AUDIO INPUT Mini Plug Connectors Connect to the unbalanced stereo audio sources (from 1 to 8) 11 OUT 1 Mini Plug Connector Connect to the unbalanced stereo audio acceptor 12 OUT 2 Terminal Block Connector Connect to the balanced stereo audio acceptor
Inhaltszusammenfassung zur Seite Nr. 10
3.4 Using the IR Transmitter You can use the RC-IR3 IR transmitter to control the machine via the built-in IR receiver on the front panel or, instead, via an optional external IR receiver (Model: C-A35M/IRR-50). The external IR receiver can be located up to 15 meters away from the machine. This distance can be extended to up to 60 meters when used with three extension cables (Model: C-A35M/A35F-50). Before using the external IR receiver, be sure to arrange for your Kramer dealer to inse
Inhaltszusammenfassung zur Seite Nr. 11
4 Installing in a Rack This section provides instructions for rack mounting the unit. Before Installing in a Rack How to Rack Mount To rack-mount a machine: Before installing in a rack, be sure that the environment is within the recommended range: 1. Attach both ear brackets to the machine. To do so, remove the OPERATING TEMPERATURE: 0º to +55ºC (32º to 131ºF) screws from each side of the STORAGE TEMPERATURE: -45º to +72ºC (-49º to 162ºF) machine (3 on each side), and HUMIDITY: 10% to
Inhaltszusammenfassung zur Seite Nr. 12
5 Connecting the VP-81K Always switch off the power to each device before connecting it to your VP-81K. After connecting your VP-81K, connect its power and then i switch on the power to each device. To connect the VP-81K, as illustrated in the example in Figure 3, do the following: 1. Connect up to eight UXGA computer graphics sources to the INPUT 15-pin HD connectors (from 1 to 8). You do not have to connect all the inputs. 2. Connect the unbalanced audio sources to up to eight INP
Inhaltszusammenfassung zur Seite Nr. 13
Figure 3: Connecting the VP-81K 5.1 Connecting the Balanced/Unbalanced Stereo Audio Output This section illustrates how to wire a balanced output connection (see Figure 4) and an unbalanced audio output (see Figure 5). Figure 4: Connecting an Figure 5: Connecting an Balanced Stereo Audio Unbalanced Output Output 10 VP-81K - Connecting the VP-81K
Inhaltszusammenfassung zur Seite Nr. 14
5.2 Controlling via RS-232 You can connect to the unit via a crossed RS-232 connection, using for example, a PC. A crossed cable or null-modem is required as shown in method A and B respectively. If a shielded cable is used, connect the shield to pin 5. Method A (Figure 6)—Connect the RS-232 9-pin D-sub port on the unit via a crossed cable (only pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5 need be connected) to the RS-232 9-pin D-sub port on the PC. Note: There is no need to conne
Inhaltszusammenfassung zur Seite Nr. 15
5.3 Connecting a PC or Controller to the RS-485 Port You can operate the VP-81K via the RS-485 port from a distance of up to 1200m (3900ft) using any device equipped with an RS-485 port (for example, a PC). For successful communication, you must set the RS-485 machine number and bus termination. To connect a device with a RS-485 port to the VP-81K: • Connect the A (+) pin on the RS-485 port of the PC to the A (+) pin on the RS-485 port on the rear panel of the VP-81K • Connect the B (–
Inhaltszusammenfassung zur Seite Nr. 16
3. Right-click Local Area Connection Properties. 4. Select Properties. The Local Area Connection Properties window appears. 5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see Figure 8). Figure 8: Local Area Connection Properties Window 6. Select Use the following IP address, and fill in the details as shown in Figure 9. 7. Click OK. Figure 9: Internet Protocol (TCP/IP) Properties Window VP-81K - Connecting the VP-81K 13
Inhaltszusammenfassung zur Seite Nr. 17
5.4.2 Connecting via a Straight-Through Cable You can connect the Ethernet of the VP-81K to the Ethernet port on a network hub or network router, via a straight-through cable with RJ-45 connectors. 5.4.3 Configuring the Ethernet Port To configure the Ethernet port, download the P3K Wizard Ethernet configuration software. Extract the file to a folder and create a shortcut on your desktop to the file. Follow these steps to configure the port: 1. Double click the desktop icon. The Connect
Inhaltszusammenfassung zur Seite Nr. 18
3. Click OK. The P3K Wizard screen appears. Do not use P3K Wizard to upgrade the firmware. To upgrade the firmware, see the document “Upgrading the VP-81K Firmware” on the Kramer Web site. VP-81K 0 VP-81K 50000 5000 0 12-12-12-12-12-12 01.00.00.0803 Figure 11: Device Properties Screen 4. If required, make changes and click Set. If not, click Close. 5.4.4 Controlling via the Embedded Web Pages The embedded Web page can be used to remotely operate the VP-81K via the Ethernet. Before y
Inhaltszusammenfassung zur Seite Nr. 19
To control the VP-81K via the embedded Web page, make sure that it is connected to the Ethernet port of your computer and do the following: 1. Open your Internet browser. 2. Type the unit’s IP number in the Address bar of your browser: The default IP number is 192.168.1.39, and may be changed by the system integrator. A Warning-Security screen appears: 3. Click Run. The VP-81K front panel is displayed on your screen (see Figure 12). Figure 12: HOME Embedded Web Page 4. Click th
Inhaltszusammenfassung zur Seite Nr. 20
The CONFIGURATIONS page lets you view some Ethernet settings (the model name, serial number, firmware version and MAC address) and change others (see Figure 13). To change CONFIGURATION definitions: 1. Click CONFIGURATIONS. The CONFIGURATIONS Web page appears. 2. Change the definitions as required. 3. Click the Submit button to apply changes, or Cancel to cancel changes. A window appears asking if you are sure you want to change the network settings. 4. Click Yes. A window appears
