Inhaltszusammenfassung zur Seite Nr. 1
UPort 1110 and 1130 User’s Manual
First Edition, August 2006
www.moxa.com/product
MOXA Technologies Co., Ltd.
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Web: www.moxa.com
MOXA Technical Support
Worldwide: support@moxa.com
Inhaltszusammenfassung zur Seite Nr. 2
UPort 1110 and 1130 User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright © 2006 MOXA Technologies Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of The MOXA Group. All other trademarks or registered marks in this manual belong to their respective manufacturers. Disclaimer Informa
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Chapter 1 Introduction ...............................................................................................1-1 Overview .............................................................................................................................. 1-2 Package Checklist................................................................................................................. 1-2 Product Features .............................................................
Inhaltszusammenfassung zur Seite Nr. 4
1 1 Chapter 1 Introduction The UPort 1110 and the UPort 1130 are USB-to-serial adaptors, an easy way to add a COM port to your system. The UPort 1110 provides one RS-232 port and the UPort 1130 provides one RS-422/RS-485 port. As a plug and play USB device, the adaptors are perfect for mobile, instrumentation, and point-of sale applications. The following topics are covered in this chapter: Overview Package Checklist Product Features Product Specifications LED Indicators
Inhaltszusammenfassung zur Seite Nr. 5
UPort 1110 and 1130 User’s Manual Introduction Overview The UPort 1110 and UPort 1130 are part of Moxa’s UPort line of USB-to-serial adaptors. The UPort line provides a range of easy-to-use solutions for adding COM ports through a PC’s USB port. Simply install the drivers, connect the UPort to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring a board, power requirements, or connection sche
Inhaltszusammenfassung zur Seite Nr. 6
UPort 1110 and 1130 User’s Manual Introduction Product Specifications USB Version USB 1.1 (also compatible with USB 1.0 and 2.0) Connector USB type B Speed 12 Mbps Serial Interface No. of Ports 1 RS-232 (UPort 1110) TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 (UPort 1130) TxD+(B), TxD-(A), RxD+(B), RxD-(A),GND RS-485 (UPort 1130) 4-wire: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND 2-wire: Data+(B), Data-(A), GND Connector Male DB9 FIFO 64 bytes Serial line protection 15 KV ESD for
Inhaltszusammenfassung zur Seite Nr. 7
UPort 1110 and 1130 User’s Manual Introduction LED Indicators UPort 1130 UPort 1110 Active Active TxD TxD RxD RxD 1110 1130 RS-232 RS-422/485 USB-to-Serial Adaptor USB-to-Serial Adaptor Name Description This LED indicates normal operation. If the driver is installed correctly and the adaptor is plugged into a functioning USB port, the Active LED will light up Active and remain on. If the LED does not light up, there may be a problem with the adaptor, the driver installation, or PC
Inhaltszusammenfassung zur Seite Nr. 8
2 2 Chapter 2 Installation and Configuration Installation of the adaptor is a simple process. First install the driver, then plug the adaptor into a USB port. When the adaptor is plugged in, Windows will load the correct drivers for the adaptor and the new COM port. In this chapter, basic installation and configuration procedures are explained. Although the installation screens will be for Windows 2000, the procedures are essentially the same for Windows 98 and later versions. The foll
Inhaltszusammenfassung zur Seite Nr. 9
UPort 1110 and 1130 User’s Manual Installation and Configuration Initial Driver Installation The Documentation and Software CD will contain the drivers for the adaptor. You may also download the drivers at www.moxa.com. The installation procedure is the same for all Windows operating systems. Use Windows Explorer to locate the driver installation file, which will be Setup or Install. On the Documentation and Software CD, this file will be located in the UPort 1100/Software folder, filed
Inhaltszusammenfassung zur Seite Nr. 10
UPort 1110 and 1130 User’s Manual Installation and Configuration 2. Click Next to install the driver in the indicated folder, or use the drop-down folder list to locate a different folder. 3. Click Install to proceed with the installation. 2-3
Inhaltszusammenfassung zur Seite Nr. 11
UPort 1110 and 1130 User’s Manual Installation and Configuration 4. Wait while the driver is installed on your hard drive. 5. A window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click Yes to proceed. 2-4
Inhaltszusammenfassung zur Seite Nr. 12
UPort 1110 and 1130 User’s Manual Installation and Configuration 6. Click Finish to complete the installation of the driver. Hardware Installation After installing the driver, plug the adaptor into any upstream USB port, such as a USB port on your computer. Windows will automatically detect the adaptor and begin installing the driver. When the Windows finishes installing the driver for the adaptor, it will then detect a new COM port, and will then install another driver for the new COM
Inhaltszusammenfassung zur Seite Nr. 13
UPort 1110 and 1130 User’s Manual Installation and Configuration 2. Windows 98 users may skip to the next step. On Windows 2000 systems, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click Yes to proceed. 3. Windows will automatically detect and install the new serial port. No further action is required Windows XP and Windows 2003 Th
Inhaltszusammenfassung zur Seite Nr. 14
UPort 1110 and 1130 User’s Manual Installation and Configuration 2. After a moment, the Found New Hardware Wizard will open. If you see the following screen, select No, not this time, then click Next. 3. On the next window that appears, select Install the software automatically (Recommended), then click Next. 2-7
Inhaltszusammenfassung zur Seite Nr. 15
UPort 1110 and 1130 User’s Manual Installation and Configuration 4. The installation wizard will search for the correct drivers. After a moment, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click Continue Anyway to proceed. 5. Windows will spend a few moments installing the UPort driver.. 2-8
Inhaltszusammenfassung zur Seite Nr. 16
UPort 1110 and 1130 User’s Manual Installation and Configuration 6. The next window indicates that Windows has completed the installation. Click Finish to continue with installation procedure. 7. After Windows has completed installing the adaptor, it will automatically detect the new COM port. The Found New Hardware balloon will appear in the bottom right corner of the Windows desktop. 2-9
Inhaltszusammenfassung zur Seite Nr. 17
UPort 1110 and 1130 User’s Manual Installation and Configuration 8. After a moment, the Found New Hardware Wizard will open. Select Install the software automatically (Recommended), then click Next. 9. The installation wizard will search for the correct drivers. After a moment, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click Continue
Inhaltszusammenfassung zur Seite Nr. 18
UPort 1110 and 1130 User’s Manual Installation and Configuration 10. Windows will spend a few moments installing the driver. 11. The next window indicates that Windows has completed the installation. Click Finish to proceed with installation procedure. 12. The Found New Hardware balloon will reappear, indicating that the installation was successful. 2-11
Inhaltszusammenfassung zur Seite Nr. 19
UPort 1110 and 1130 User’s Manual Installation and Configuration Configuring the COM Port After the driver and hardware have been successfully installed, the new COM port will have a COM number and can be accessed and controlled just like your PC’s built-in COM ports. If you need to change the baud rate, parity, or other COM port settings, you may use your serial communication application to make those changes. You may also go to Device Manager and right-click the MOXA USB Serial Port, w
Inhaltszusammenfassung zur Seite Nr. 20
UPort 1110 and 1130 User’s Manual Installation and Configuration Configuring the Adaptor If you need to change the COM number that the adaptor assigns to the COM port, or adjust other advanced settings, you may go to Device Manager and right-click the UPort adaptor, which will be listed under Multi-port serial adaptors. In the context menu that pops up, you may select Properties in order to modify the COM port settings. In the Port Configuration tab, you will see the new COM port liste
