Inhaltszusammenfassung zur Seite Nr. 1
Dual Nx56/64
Option Module
PN 1200142L1#HS
Plug-On Board PN 1200159L1
USER MANUAL
61200142L1-1C
August 2000
Inhaltszusammenfassung zur Seite Nr. 2
Trademark: TM T-Watch Pro is a registered trademark of ADTRAN. 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 Phone: (256) 963-8000 © 2000 ADTRAN, Inc. All rights reserved. Printed in USA.
Inhaltszusammenfassung zur Seite Nr. 3
Notes provide additional useful information. Cautions signify information that could prevent service interrup- tion. Warnings provide information that could prevent damage to the equipment or endangerment to human life. iii
Inhaltszusammenfassung zur Seite Nr. 4
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction m
Inhaltszusammenfassung zur Seite Nr. 5
LIMITED PRODUCT WARRANTY ADTRAN warrants that for five (5) years from the date of shipment to Cus- tomer, all products manufactured by ADTRAN will be free from defects in materials and workmanship. ADTRAN also warrants that products will con- form to the applicable specifications and drawings for such products, as con- tained in the Product Manual or in ADTRAN's internal specifications and drawings for such products (which may or may not be reflected in the Product Manual). This warranty o
Inhaltszusammenfassung zur Seite Nr. 6
vi
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents List of Figures ............................................................................................................xi List of Tables ........................................................................................................... xiii Chapter 1. Introduction...........................................................................................1-1 Dual Nx56/64 V.35 Option Module Overview ....................................................1-1 Dual Nx56/64
Inhaltszusammenfassung zur Seite Nr. 8
Table of Contents Chapter 3. Operation...............................................................................................3-1 Overview ....................................................................................................................3-1 Front Panel Indicators/Buttons........................................................................3-1 Menu Structure ...................................................................................................3-1 Slot .....
Inhaltszusammenfassung zur Seite Nr. 9
Table of Contents Index ................................................................................................................. Index-1 61200142L1-1 Dual Nx/56/64 Option Module User Manual ix
Inhaltszusammenfassung zur Seite Nr. 10
Table of Contents x Dual Nx/56/64 Option Module User Manual 61200142L1-1
Inhaltszusammenfassung zur Seite Nr. 11
List of Figures Figure 1-1. Dual Nx56/64 V.35 Option Module....................................................1-4 Figure 2-1. Installing the Option Module ..............................................................2-2 Figure 2-2. Attaching the Plug-On Board ..............................................................2-3 Figure 3-1. TSU 100 Main Menu Tree .....................................................................3-2 Figure 3-2. Dual Nx56/64 V.35 Menu Tree ........................
Inhaltszusammenfassung zur Seite Nr. 12
List of Figures xii Dual Nx/56/64 Option Module User Manual 61200142L1-1
Inhaltszusammenfassung zur Seite Nr. 13
List of Tables Table 2-1. Subminiature D Connection................................................................. 2-4 Table 3-1. Normal Mode Operation ...................................................................... 3-8 Table B-1. 26-Pin Subminiature D to V.35 Winchester Cable............................B-2 61200142L1-1 Dual Nx/56/64 Option Module User Manual xiii
Inhaltszusammenfassung zur Seite Nr. 14
List of Tables xiv Dual Nx/56/64 Option Module User Manual 61200142L1-1
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 1 Introduction DUAL NX56/64 V.35 OPTION MODULE OVERVIEW The Dual Nx56/64 V.35 option module is one of the op- tion modules available for use with the following ADT- RAN equipment: • TSU 100e • TSU 600e • TSU 610 • TSU 120e • TDU 120e • ESU 120e The Dual Nx56/64 V.35 option module installs in the op- tion slot of the TSU/TDU/ESU family of products and provides two additional synchronous V.35 interface ports. When used in these products, this interface port al- lows two additional DTEs
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 1. Introduction Dual Nx56/64 V.35 Option Module and Plug-on Board Description The Dual Nx56/64 V.35 option module operates in the option slot of the TSU/TDU/ESU products, while the plug-on board operates as a plug-on to any option mod- ule. Both are under the control of the TSU/TDU/ESU product. The option module and the plug-on board are configured from the front panel or by an external PC pro- gram. The internal menus for their configuration are part of the option module and plu
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 1. Introduction • Loopbacks Port (toward the network) DTE (toward the DTE) • Both loopbacks can be invoked locally or remotely (V.54) Dual Nx56/64 V.35 Option Module Specifications DTE Interface CCITT V.35 Synchronous Rates 56 kbps to 1.536 Mbps (T1) and 2048 Mbps (E1) in 56K or 64K steps Clock Options Normal, Inverted Tests • Local Loopback (Bilateral) - Menu activated • Remote Loopback (V.54) - Menu activated •Self-test Test Pattern 511 with errored seconds display and error injec
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 1. Introduction Inband Communication Channel Enabled or Disabled Physical Description The Dual Nx56/64 V.35 option module plugs into the op- tion slot in the rear of the TSU/TDU/ESU family of prod- ucts (see Figure 1-1). The rear panel of the option module includes a plastic plug over a cutout for a second V.35 connector. This al- lows a Dual Nx56/64 V.35 plug-on board (or any other plug-on board) to be added to the Dual Nx56/64 option module, creating a multiport module. The PO
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Installation UNPACK & INSPECT Carefully inspect the option module or plug-on board for any shipping damage. If damage is suspected, file a claim immediately with the carrier and then contact ADTRAN Customer and Product Service (CAPS). If possible, keep the original shipping container for use in shipping the op- tion module or plug-on board back for repair or for veri- fication of damage during shipment. See product support information on the back page of this manual for informa-
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2. Installation INSTALLING THE OPTION MODULE Placement of the Option Module Figure 2-1 shows the proper placement of the option module. Perform the following steps to install the option module: 1. Remove the cover plate from the TSU/TDU/ESU unit rear panel. 2. Slide the option module into the rear panel of the TSU/TDU/ESU unit until it is positioned firmly against the front of the unit. 3. Fasten the thumbscrews at both edges of the option module. Cover Plate TSU/TDU/ESU UNIT Opti
