Inhaltszusammenfassung zur Seite Nr. 1
TRACER 5045
System Manual
12805045L1A TRACER 5045 System (Plan A)
12805045L1B TRACER 5045 System (Plan B)
612805045L1-1A
April 2003
Inhaltszusammenfassung zur Seite Nr. 2
Trademarks TRACER 5045 System Manual Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. ® TRACER is a registered trademark of ADTRAN, Inc. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages
Inhaltszusammenfassung zur Seite Nr. 3
TRACER 5045 System Manual Revision History Revision History Document Date Description of Changes Revision A March 2003 Initial release of manual. Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. 612805045L1-1A © 2003 ADTRAN, Inc. 3
Inhaltszusammenfassung zur Seite Nr. 4
Safety Instructions TRACER 5045 System Manual Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not
Inhaltszusammenfassung zur Seite Nr. 5
TRACER 5045 System Manual FCC-Required Information FCC-Required Information Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency e
Inhaltszusammenfassung zur Seite Nr. 6
FCC-Required Information TRACER 5045 System Manual FCC Output Power Restrictions The FCC does not require licensing to implement this device. License-free operation in the industrial, scientific, and medical band is documented in FCC Rules Part 15.247. It is the responsibility of the individuals designing and implementing the radio system to assure compliance with any pertinent FCC Rules and Regulations. This device must be professionally installed. Exposure to Radio Frequency Fields The TRA
Inhaltszusammenfassung zur Seite Nr. 7
TRACER 5045 System Manual Warranty and Customer Service Warranty and Customer Service ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. Customer Service, Product Support Information, and Training ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service
Inhaltszusammenfassung zur Seite Nr. 8
Customer Service, Product Support Information, and Training TRACER 5045 System Manual Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web site provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available at: http://support.adtran.com
Inhaltszusammenfassung zur Seite Nr. 9
Table of Contents Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 This section of ADTRAN’s TRACER 5045 System Manual is designed for use by network en- gineers, planners, and designers for overview information about the TRACER 5045. Section 2 Microwave Path Engineering Basics . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Explains the basics of analyzing a wireless microwave link or path. The significant parameters are defi
Inhaltszusammenfassung zur Seite Nr. 10
Table of Contents TRACER 4208 System Manual 10 © 2003 ADTRAN, Inc. 612805045L1-1A
Inhaltszusammenfassung zur Seite Nr. 11
SYSTEM DESCRIPTION This section of ADTRAN’s TRACER 5045 System Manual is designed for use by network engineers, planners, and designers for overview information about the TRACER 5045. It contains general information and describes physical and operational concepts, network relationships, provisioning, testing, alarm status, and system monitoring. This section should be used in conjunction with Section 3, Engineering Guidelines, of the system manual. CONTENTS System Overview . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 12
Section 1 System Description TRACER 5045 System Manual 1. SYSTEM OVERVIEW The ADTRAN TRACER 5045 wireless ethernet switch to transport 10/100BaseT/TX data at 45 Mbps in point-to-point applications for up to 25 miles on a line-of-sight path. As authorized under Part 15.247 of the FCC Rules, the TRACER 5045 operates license-free in the 5.8 GHz Industrial, Scientific, and Medical (ISM) band. The ISM band requires no frequency coordination or licensing of end users. The TRACER 5045 provides four
Inhaltszusammenfassung zur Seite Nr. 13
MICROWAVE PATH ENGINEERING BASICS Explains the basics of analyzing a wireless microwave link or path. The significant parameters are defined, and several recommendations are offered. CONTENTS Line-of-Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Decibels
Inhaltszusammenfassung zur Seite Nr. 14
Section 2 Microwave Path Engineering Basics TRACER 5045 System Manual 14 © 2003 ADTRAN, Inc. 612805045L1-1A
Inhaltszusammenfassung zur Seite Nr. 15
TRACER 5045 System Manual Section 2 Microwave Path Engineering Basics 1. LINE-OF-SITE The TRACER 5045 system is designed for operation in the license-free 5.725 GHz to 5.850 GHz industrial, scientific and medical (ISM) band. Radio wave propagation in this band exhibits microwave characteristics which are ideally suited for point-to-point, line-of-sight communications. Line-of-Sight requires that the transmitting antenna and receiving antenna are able to “see” each other, and that the straig
Inhaltszusammenfassung zur Seite Nr. 16
Section 2 Microwave Path Engineering Basics TRACER 5045 System Manual Higher levels of fade margin indicate stronger protection against signal fading and a more reliable link. For most applications, 20 to 30 dB of fade margin should ensure a reliable link. The following sections further discuss the necessary power calculations and their components. 4. RECEIVER POWER The viability of a particular microwave path is determined by the power of the transmitted microwave signal, the transmit and r
Inhaltszusammenfassung zur Seite Nr. 17
TRACER 5045 System Manual Section 2 Microwave Path Engineering Basics λ G G T R d, L P L L P P T R Figure 1. Example Microwave Path with Parameters The following sections further discuss the power budget analysis and its components. Antenna Gain Actual transmit and receive antenna gain values depend strictly upon the physical characteristics of the antennas installed for each link. In other words, the size of the dish determines the antenna gain. Using a parabolic dish antenna results in th
Inhaltszusammenfassung zur Seite Nr. 18
Section 2 Microwave Path Engineering Basics TRACER 5045 System Manual Carrier Wavelength ( λ) The carrier wavelength is the physical wavelength of the main RF carrier being used for communication, and is usually approximated at the center frequency of the band (which is 5787.5 MHz for the TRACER 5045). The carrier wavelength calculations follow: λ = c / f (meters) where c = speed of light (in meters) f = frequency (in Hz) resulting in the following carrier wavelength: 8 5 λ = 3.00 x 10¯ / 5
Inhaltszusammenfassung zur Seite Nr. 19
TRACER 5045 System Manual Section 2 Microwave Path Engineering Basics Table 2 gives typical loss figures for some of the more common coaxial cable types (per 100 feet). Table 2. Typical Coaxial Loss for Common Cable Types 5.8 GHz Loss/100 ft. Cable Type (in dB) RG58 N/A RG8 (air) N/A RG8 (foam) N/A 1/4” Coax 11.36 3/8” Coax 9.65 1/2” Coax 6.49 5/8” Coax 4.90 7/8” Coax N/A 1 1/4” Coax N/A 1 5/8” Coax N/A 5.8 GHz Elliptical Waveguide 1.23 Path Loss (L ) P Path loss is the estimated attenuation
Inhaltszusammenfassung zur Seite Nr. 20
Section 2 Microwave Path Engineering Basics TRACER 5045 System Manual Table 3 lists path loss values for various path lengths for the TRACER 5045 5.8 GHz system. Values not listed in the table can be interpolated from those listed. Table 3. Path Loss for Given Path Lengths Path Length Path Loss (miles) (dB) 1112 2118 3121 4124 5126 10 132 15 135 20 138 25 140 30 141 35 143 5. RECEIVER SENSITIVITY Receiver sensitivity is a value expressed in decibels referenced to one milliwatt (dBm) that cor
