Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S MANUAL
Blu-ray Disc™/DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
BD611
www.lg.com
BD551-N.BUSALLP_0487.indd 1 7/19/11 11:40 AM
Inhaltszusammenfassung zur Seite Nr. 2
BD551-N.BUSALLP_0487.indd 2 7/19/11 11:40 AM
Inhaltszusammenfassung zur Seite Nr. 3
Safety Information Safety Information 3 1 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK CAUTION: This product employs a Laser System. DO NOT REMOVE COVER NO USER-SERVICEABLE To ensure proper use of this product, please read PARTS INSIDE REFER SERVICING TO QUALIFIED this owner’s manual carefully and retain it for future SERVICE PERSONNEL. reference. Shall the unit require maintenance, contact an authorized service center.
Inhaltszusammenfassung zur Seite Nr. 4
Safety Information 4 Safety Information This device is equipped with a portable battery or • Connect the equipment into an outlet on a accumulator. circuit different from that to which the receiver is connected. Safety way to remove the battery or the battery from the equipment: Remove the old battery • Consult the dealer or an experienced radio/TV 1 or battery pack, follow the steps in reverse order technician for help. than the assembly. To prevent contamination of CAUTION: Any changes
Inhaltszusammenfassung zur Seite Nr. 5
Safety Information Safety Information 5 Notes on Copyrights IMPORTANT SAFETY • Because AACS (Advanced Access Content System) is approved as content protection system for BD INSTRUCTIONS format, similar to use of CSS (Content Scramble 1 System) for DVD format, certain restrictions are 1. Read these instructions. imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this 2. Keep these instructions. product and restrictions on this product may vary
Inhaltszusammenfassung zur Seite Nr. 6
6 Connection Contents 16 Video/Audio (Left/Right) Connection 17 Resolution Setting 18 Connecting to an Amplifier 18 Connecting to an Amplifier 1 via HDMI Output Safety Information 19 Connecting to an Amplifier via Digital Audio Output 3 Cautions and Warnings 19 Connecting to an Amplifier via 2 Channel Audio Output 20 Connecting to your Home Network 2 20 Network connection Preparation 21 Wired Network Setup 8 Introduction 23 USB device connection 8 About the “ ” Symbol 23 Playback content i
Inhaltszusammenfassung zur Seite Nr. 7
7 35 Marker Search 49 Network 35 Using the search menu 36 Changing content list view 7 1 36 Last Scene Memory Appendix 37 On-Screen display 37 Displaying content 50 Controlling a TV with the Supplied information on-screen Remote Control 37 Playing from selected time 50 Setting up the remote to 2 38 Hearing a different audio control your TV 38 Selecting a subtitle 51 Network Software Update language 51 Network update notification 38 Watching from a different 51 Software Update 3 angle 5
Inhaltszusammenfassung zur Seite Nr. 8
Preparation 8 Preparation 2 Preparation Music files contained in 2 Introduction MUSIC the USB/Disc PHOTO Photo files About the “ ” Symbol Display “ ” may appear on your TV display during Supplied Accesorries operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual Video cable (1) Audio cable (1) NOTE Indicates special notes and operating features. CAUTION Remote control (1) Battery (1) Indicates cautions
Inhaltszusammenfassung zur Seite Nr. 9
Preparation Preparation 9 Playable Discs NOTE Blu-ray Disc - Discs such as movies that can • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) be purchased or rented. disc itself, some CD-R/RW (or DVD±R/RW) discs - BD-R/RE discs that contain cannot be played on the unit. Movie, Music or Photo files. • Depending on the recording software & the DVD-VIDEO (8 cm / 12 cm disc) finalization, some recorded discs (CD-R/RW, DVD ±R/RW, BD-R/RE) may not be playable.
Inhaltszusammenfassung zur Seite Nr. 10
Preparation 10 Preparation File compatibility NOTE Overall • HD movie files contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB Available File extensions: “.jpg”, “.jpeg”, “.png”, 2.0 are recommended to play back HD movie “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, files. “.wma”, ".gif" • This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher • The file name is limited to 180 characters. level, the warning me
Inhaltszusammenfassung zur Seite Nr. 11
Preparation Preparation 11 For Dolby® Digital Plus, Dolby TrueHD and DTS- Regional Code HD multi-channel audio playback: This unit has a regional code printed on the • An amplifier/receiver with a built-in (Dolby rear of the unit. This unit can play only BD-ROM Digital, Dolby Digital Plus, Dolby TrueHD, or DVD discs labeled same as the rear of the DTS or DTS-HD) decoder. unit or “ALL”. • Main, center, surround speakers and subwoofer as necessary for chosen format. AVCHD (Advanced Video
Inhaltszusammenfassung zur Seite Nr. 12
Preparation 12 Preparation Remote control • • • • • • a • • • • • • Direction buttons: Selects an option in the menu. (POWER): Switches the 1 ENTER ( ): Acknowledges player ON or OFF. menu selection. REPEAT: Repeats a desired 2 x RETURN ( ): Exits the menu or section or sequence. resumes playback. The resume play function may not work * : The button is not available for depending on the BD-ROM disc. any function. B (OPEN/CLOSE): Opens and INFO/DISPLAY ( ): Displays or exits On-S
Inhaltszusammenfassung zur Seite Nr. 13
Preparation Preparation 13 Front panel 2 Disc Tray a e N/X (PLAY / PAUSE) b Display Window f x (STOP) c Remote Sensor 1 g (POWER) Button d Z (OPEN/CLOSE) h USB Port Rear panel AC power cord HDMI OUT (Type A, Version 1.3) a e b VIDEO OUT f DIGITAL AUDIO OUT (COAXIAL) c 2CH AUDIO OUT (Left/Right) g LAN port d COMPONENT VIDEO OUT (Y PB PR) BD551-N.BUSALLP_0487.indd 13 7/19/11 11:41 AM
Inhaltszusammenfassung zur Seite Nr. 14
Installation 14 Installation 3 Installation HDMI Connection Connecting to Your TV If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, Version 1.3). Connect the HDMI jack Make one of the following connections, on the player to the HDMI jack on a HDMI depending on the capabilities of your existing 3 compatible TV or monitor. equipment. • HDMI connection (page 14-15) HDMI Connection • Component Video connection (page 16) • Video connection (page
Inhaltszusammenfassung zur Seite Nr. 15
Installation Installation 15 What is SIMPLINK? NOTE • If a connected HDMI device does not accept the audio output of the player, the HDMI device Some functions of this unit are controlled by ’s audio sound may be distorted or may not the TV’s remote control when this unit and LG output. TV’s with SIMPLINK are connected through • When you use HDMI connection, you can HDMI connection. change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.) Controllable funct
Inhaltszusammenfassung zur Seite Nr. 16
Installation 16 Installation Component Video Connection NOTE Connect the COMPONENT VIDEO OUT jacks on When you use COMPONENT VIDEO OUT the player to the corresponding input jacks on connection, you can change the resolution for the the TV using component video cable. Connect output. (Refer to “Resolution setting” on page 17.) the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables. Video/Audio (Left/Right) Component Connectio
Inhaltszusammenfassung zur Seite Nr. 17
Installation Installation 17 Resolution Setting NOTE The player provides several output resolutions • If your TV does not accept the resolution you for HDMI OUT and COMPONENT VIDEO OUT have set on the player, you can set resolution to jacks. You can change the resolution using 480p as follows: [Setup] menu. 1. Press to open the disc tray. Z 1. Press HOME ( ). 2 Press x (STOP) for more than 5 seconds. 2. Use Y to select the [Setup] and press • Since several factors affect the resolution o
Inhaltszusammenfassung zur Seite Nr. 18
Installation 18 Installation Connecting to an Amplifier via Connecting to an HDMI Output Amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on Make one of the following connections, pages 27-28.) depending on the capabilities of your existing equipment. HDMI Connection • HDMI Audio connection • Digital Audio connection (page 19) • 2CH Analog Audio co
Inhaltszusammenfassung zur Seite Nr. 19
Installation Installation 19 Connecting to an Amplifier via Connecting to an Amplifier via Digital Audio Output 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT jack Connect the Left and Right 2CH AUDIO OUT to the corresponding in jack (COAXIAL) on your jacks on the player to the audio left and right amplifier. Use an optional digital audio cable. in jacks on your amplifier, receiver, or stereo You will need to activate the player’s digital system using audio cables. output. (S
Inhaltszusammenfassung zur Seite Nr. 20
Installation 20 Installation Connecting to your Wired Network Connection Home Network Router/Modem Broadband This player can be connected to a local area service network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home PC network, you have access to services such as software updates and BD-Live interactivity. PC 3 Network connection Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or
