Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Warning This equipment
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS 1 INTRODUCTION............................................................................. 1 1.1 Features......................................................................................................................... 1 1.2 Specifications................................................................................................................ 1 1.3 Package Contents......................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
1 Introduction Thank you for purchasing the Hawking Technologies Hi-Gain Mini USB Wireless-G Adapter. The HWU54DM complies with the IEEE 802.11g standard, which supports up to 54Mbps high-speed wireless networking. It is also backwards compatible with IEEE 802.11b devices. The HWU54DM is a high quality, high performance wireless product that has been designed with Hawking’s Hi-Gain Technology for improved distance and throughput. Using a unique swivel-and-rotate design paired with a 5d
Inhaltszusammenfassung zur Seite Nr. 5
• Interface: 32-bit Cardbus • Frequency Band: 2.4000 ~ 2.4835GHz (Industrial Scientific Medical Band) • Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) BPSK, QPSK, CCK (11b) • Data Rate: 54/48/36/24/18/12/11/9/6/5.5/2/1Mbps auto fallback • Security: 64/128-bit WEP Data Encryption, WPA, AES and IEEE 802.1x • Antenna: Hi-Gain 6dBi Patch Antenna (Fold-Up and Swivel) • Drivers: Windows 98SE/Me/2000/XP • LEDs: TX/RX, Link • Transmit Power: 16dBm~18dBm (Before Antenna) • Power con
Inhaltszusammenfassung zur Seite Nr. 6
2 Installation Procedure Before you proceed with the installation, please notice following descriptions. Note1: Please do not install the HWU54DM into your computer before installing the software program from the CD. Note2: The following installation was operated under Windows XP. (Procedures are similar for Windows 98SE/Me/2000.) Note3: If you have installed the Wireless adapter driver & utility before, please uninstall the old version first. A. Insert the Installation CD into your
Inhaltszusammenfassung zur Seite Nr. 7
D. The system will begin to install the software utility for the HWU54DM. Follow the instruction of the program to plug in the Mini USB Adapter into the USB port of your desktop or laptop computer. E. The system will automatically detect the Mini USB Adapter and copy the necessary driver files over. F. Windows Hardware setup will present a list of drivers for installing the HWU54DM. Select Hawking HWU54DM Hi-Gain Wireless-G USB Adapter. Click “Next” to continue the hardwa
Inhaltszusammenfassung zur Seite Nr. 8
G. Windows will display the Windows “Hardware Installation” warning screen. Click “Continue Anyway” to proceed with the installation. H. Click “Finish” to complete hardware installation of the HWU54DM. 5
Inhaltszusammenfassung zur Seite Nr. 9
3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the HWU54DM and monitor the link status and statistics of your wireless connection. The Configuration Utility appears as an icon on the system tray of your Windows operating system while the card is running. You can open it by double-clicking on the icon. You may also “Right-click” the icon, which will bring up the following options: Lauch Config Utilities Select “Lauch Config Ut
Inhaltszusammenfassung zur Seite Nr. 10
Parameter Description Available Networks This list shows all available wireless networks within range of your card. It also displays the information of the networks including the SSID, BSSID, Signal Strength, Channel, Encryption, Authentication and Network Type. If you want to connect to any networks on the list, double-click the item on the list, and the card will automatically connect to the selected network. Rescan Button Click “Rescan” button to collect the information of
Inhaltszusammenfassung zur Seite Nr. 11
Activate Button Click “Activate” to connect to the selected profile. 3.2.1 Configure the Profile System Configuration Parameter Description Profile Name Define a recognizable profile name for you to identify the different networks. SSID The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintentional merging of two co-located WLANs. You may specify a SSID for the card and then only the device with the same SSID ca
Inhaltszusammenfassung zur Seite Nr. 12
Parameter Description Network Type Infrastructure – This operation mode requires the presence of an 802.11 Access Point. All communication is done via the Access Point or Router. Ad-Hoc – Select this mode if you want to connect to another wireless station in the Wireless LAN network without going through an Access Point or Router. Peer to Peer. Transmit Power If you wish to lower the transmit power of the card to save the power of your system, you can select the lower perce
Inhaltszusammenfassung zur Seite Nr. 13
Authentication vs. Security Parameter Description Authentication Type This setting has to be consistent with the wireless networks that the card intends to connect to. All security keys within a network must match to allow successful communications. None – No authentication is needed among the wireless network. Shared – Only wireless stations using a shared key (WEP Key identified) are allowed to connecting each other. WPA-PSK –It is a special mode designed for home and sma
Inhaltszusammenfassung zur Seite Nr. 14
Parameter Description Encryption Mode None – Disable the WEP Data Encryption. WEP – Enable the WEP Data Encryption. When the item is selected, you have to continue setting the WEP Encryption keys. TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. AES – AES has been developed to ensure the highest degree of
Inhaltszusammenfassung zur Seite Nr. 15
3.2.2 Enable WPA in Windows XP Wi-Fi Protected Access (WPA) is a specification of standards-based, interoperable security enhancement that strongly increases the level of data protection (encryption) and access control (authentication) for existing and future wireless LAN systems. The technical components of WPA include Temporal Key Integrity Protocol (TKIP) for dynamic key exchange, and 802.1x for authentication. There are two types of WPA security: WPA-PSK (no server) and WPA (
Inhaltszusammenfassung zur Seite Nr. 16
3. Press the “Configure” button to configure the WPA function for the current network. Note: Uncheck “Use Windows to Configure my wireless network settings”, the “RaConfig” utility will be enabled again. Parameter Description Network Authentication Open –No authentication is needed among the wireless network. Shared – Only wireless stations using a shared key (WEP Key identified) are allowed to connecting each other. WPA – This mode is for enterprise with an authent
Inhaltszusammenfassung zur Seite Nr. 17
Parameter Description Data Encryption WEP – In WPA or WPA-PSK mode, WEP is also able to be the encryption method for the transmission data. TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. AES – AES has been developed to ensure the highest degree of security and authenticity for digital information and it is th
Inhaltszusammenfassung zur Seite Nr. 18
for the networking. Parameter Description Current Tx Rate Display the transmission rate of the network. The maximum transmission rate is 54Mbps. Throughput (Kbits/sec) Display the speed of data transmitted and received. Link Quality This bar indicates the quality of the link. The higher the percentage, the better the quality. dBm If you want to know the signal strength in the unit of dBm, select this check box. Signal Strength This bar shows the signal strength level
Inhaltszusammenfassung zur Seite Nr. 19
Reading the Link Status Page and Obtaining the Strongest Connection The Link Status page gives you information regarding your current wireless channel, transmit rate (speed) and link/signal quality. You will use this utility to figure out which antenna position results in the best performance and connection. 1) First you must determine where the location of your Wireless Access Point is within your network. 2) Position the directional antenna towards the location of the Acces
Inhaltszusammenfassung zur Seite Nr. 20
original closed position to avoid damage when travelling. 3.4 Statistics This option enables you to view the available statistic information with its Tx counts (Tx success, Tx error, RTS Success and RTS Failed), and its Rx counts (Rx success, Rx error). You may reset the counters by clicking ”Reset Counter”. 3.5 Advanced This option enables you to configure more advanced settings, for example: wireless mode, protection mode and etc. 17
