Inhaltszusammenfassung zur Seite Nr. 1
Wireless USB Print Adapter
with Bluetooth Technology
User Manual (GBP201)
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Welcome Thank you for purchasing the IOGEAR wireless USB print adapter with Bluetooth technology. This print adapter is a first rate connectivity accessory designed to help reduce the frustration of dealing with cables in your home or office. IOGEAR wireless USB print adapter with Bluetooth Technology allows Bluetooth enabled computers to send print job wireless to USB printers. ©2004 IOGEAR. All Rights Reserved. PKG-M0111 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered tr
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents ○○○○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○ Package Content 2 ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Overview 3 ○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○ Features 4 ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○ Requirements 5 ○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○ Introduction 6 ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○ Installation 7 ○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○ Operation 17 ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○○○○ Specification 18 ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Technical Support 19 ○○○○○○○○○○○○○ ○○○○○○○○○○○
Inhaltszusammenfassung zur Seite Nr. 5
Package Contents This package contains: 1 Bluetooth print adapter 1 USB B-B cable 1 User manual 1 Warranty registration card * If any items are damaged or missing, please contact your dealer. 2
Inhaltszusammenfassung zur Seite Nr. 6
Overview IOGEAR’s palm sized single-port Wireless USB Print Adapter with Bluetooth Technology allows any Bluetooth enabled computer to wirelessly send print jobs to a USB printer. It complies with USB 1.1 specifications and the Bluetooth 1.1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 66 ft (20 meters). This unit supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile), all of which resides on onboard flash
Inhaltszusammenfassung zur Seite Nr. 7
Features Allows any Bluetooth enabled computer to wirelessly send the print job to a USB printer Plug and Play, easy to install Bluetooth Class 2 device with a 66 ft range (20 meters) Supports data rate of 723 Kbps Supports Pico-net and Scatter-net and up 7 devices Complies with USB 1.1 specifications and the Bluetooth 1.1 specifications Supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile) 4
Inhaltszusammenfassung zur Seite Nr. 8
System Requirements Printers with USB interface. * Multi function printers not supported. Bluetooth enabled computers. 5
Inhaltszusammenfassung zur Seite Nr. 9
Introduction 1. USB Port – connect to the USB printer. 1 2. Power LED – Red after powered on. 3. Link LED – Flashes green after powered on. 4. Power – 5V, 1A. 2 3 4 6
Inhaltszusammenfassung zur Seite Nr. 10
Installation First of all, the computer that you plan to print from needs to have the printer driver, the easiest way is to install the printer driver first. Due to the fact that all printer manufacturers have somewhat different procedure to install the printer driver, we do not cover the printer driver installation in this manual. Also, we do not cover the procedures of installing Bluetooth driver to your computer, we assume the computer is already Bluetooth enabled. If you are using an IOGEAR
Inhaltszusammenfassung zur Seite Nr. 11
Installation 1. From the Bluetooth enabled computer, click the Bluetooth logo on your screen, then click My Bluetooth Place, then select Entire Bluetooth Neighborhood. 8
Inhaltszusammenfassung zur Seite Nr. 12
Installation 2. You can see that the computer starts searching for the Bluetooth devices within the range. The Bluetooth print adapter should be found as shown in the follow window: 9
Inhaltszusammenfassung zur Seite Nr. 13
Installation 3. Double click on the icon of the IOGEAR Bluetooth adapter. Click OK on the prompted question. (This question would not be prompted if the printer driver is already installed.) 10
Inhaltszusammenfassung zur Seite Nr. 14
Installation 4. The following window will be prompted for you to select the appropriate driver. (This step would be skipped if the printer driver is already installed.) 11
Inhaltszusammenfassung zur Seite Nr. 15
Installation 5. Select the appropriate driver, or click on “Have Disk…”. Follow the installation step provided by the printer manufacturer. 6. After the driver installation, go to Control Panel, and select Printers, the printer that you just installed should be in the following window: 12
Inhaltszusammenfassung zur Seite Nr. 16
Installation 7. Right click the printer icon (in this case the Epson C62), select Properties from the drop down menu. 13
Inhaltszusammenfassung zur Seite Nr. 17
Installation 8. Select Ports on the Printer Properties screen, and check the IOGEAR print adapter port, then click OK. 14
Inhaltszusammenfassung zur Seite Nr. 18
Installation 9. The installation is done. You can print a document to test it, this printer should be on the printer list already, as shown in the following window. 15
Inhaltszusammenfassung zur Seite Nr. 19
Installation Or, you can click open the printer Properties page again and select Print Test Page. 16
Inhaltszusammenfassung zur Seite Nr. 20
Operation After the print adapter is installed and the test page has printed fine, you will be able to print wirelessly just as if the printer is connected directly to your computer. You should be able to see the printer in the screen similar to the following print screen: This print adapter can be paired to up to 7 computers, the print jobs will be handled on a first come first serve basis. 17
