Bedienungsanleitung BlueTrek X2

Inhaltszusammenfassung zur Seite Nr. 1

BLUETREK X2 user guide

Thank you for choosing the BLUETREK® X2, we hope you will enjoy the convenience
we are bringing to you. The BLUETREK® X2 offers many functions, please read this
manual before getting started.



EC-Declaration of Conformity

We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK X2-2

to which this declaration refers is in conformity with the ap

Inhaltszusammenfassung zur Seite Nr. 2

FCC/ Industry Canada Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. In compliance with Industry Canada regulations, technical specifications have been provided in a declaration of conformity. This does not imply that Industry Canada approved the equipment.

Inhaltszusammenfassung zur Seite Nr. 3

BEFORE USING YOUR HEADSET FOR THE FIRST TIME - You must charge it continuously for about 8 hours, until the red indicator light turns off. Please refer to the “Charging the BLUETREK® X2” section of this manual. - Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® X2” section of this manual. Introduction The BLUETREK® X2 headset is a wireless headset based on the Bluetooth® technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and H

Inhaltszusammenfassung zur Seite Nr. 4

To initiate pairing: 1. Place the BLUETREK® X2 and your mobile phone within 0.3 meter (1 foot) from each other. 2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth® mobile phone user manual). 3. When the BLUETREK® X2 is switched off, press and hold the TALK button for about 7 seconds until the indicator light flashes red and blue alternately. And a sound can be heard in the speaker. 4. Once the mobile phone detects the headset, a “BLUETREK X2” mes

Inhaltszusammenfassung zur Seite Nr. 5

*Mobile phone with voice recognition . Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone’s manual . When there is no incoming or active call, press once on the TALK button . Wait for the audio signal sent by the mobile phone (generally a short tone). . Speak the name of person you wish to call. Mobile without voice recognition . Make sure both the headset and the mobile

Inhaltszusammenfassung zur Seite Nr. 6

This function may not be available, depending on your phone’s functionality. However, you can always answer the second call from your phone keypad. Note: This function is not available on some phones. Please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more. Additional features with some phones Rejecting a call When the headset rings, press the TALK button for about 2 seconds. Redial the last number When there is no inco