Inhaltszusammenfassung zur Seite Nr. 1
MultiConnect Adapter
Serial-to-Bluetooth Adapter
MTS2BTA
MTS2BTA-R
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
Copyright and Technical Support User Guide MTS2BTA and MTS2BTA-R MultiConnect Serial-to-Bluetooth Adapter S000370A Rev. A Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi- Tech Systems, Inc. All rights reserved. Copyright © 2005 Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranty of merch
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Contents Chapter 1 – Description and Specifications ..............................................................................................................4 Product Description ....................................................................................................................................................4 Applications ...............................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Chapter 1 – Description and Specifications Chapter 1 – Description and Specifications Product Description The MultiConnect Serial-to-Bluetooth adapter enables communication between an installed host serial device and a peripheral wireless device. The serial side of the MultiConnect provides transparent serial data-to-Internet protocol conversion, eliminating the need for any hardware modifications. The embedded Bluetooth wireless technology of the MultiConnect provides a secure, stand
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1 – Description and Specifications Product Build Options Product Description Region MTS2BTA Serial-to-Bluetooth Adapter AC-Powered North America and Europe MTS2BTA-R Serial-to-Bluetooth Adapter DC-Powered North America and Europe MultiConnect Package Contents AC-Powered Version • One Serial-to-Bluetooth Adapter • One antenna • One mounting bracket • RS-232 serial cable • One universal power supply with power cord • A set of four self-adhesive plastic feet • One
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 1 – Description and Specifications General Safety The adapter is designed and intended to be used in either fixed or mobile applications. In the “Fixed” application, the device is physically secured at one location and not easily moved to another location. In the “Mobile” application, the device may be regularly moved to different locations. Caution! Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and the body of the user or nearby p
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 – Description and Specifications Technical Specifications Category Description Serial Interface Supports speeds from 1200bps to 230Kbps RF Interface Frequency………………2402 – 2480MHz Modulation……………...FHSS/GFSK Channel Intervals………1MHz Number of Channels….79CH Transmission Rate…….721Kbps Data Format For Serial Interface - Asynchronous, 8-N-1, Default is 9600bps Flow Control Hardware RF Receive Sensitivity -80dBm typical Output Level (Class 1) 20dBm maximum RF Range Clas
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 1 – Description and Specifications Category Description Intelligent Features Can be configured, commanded, and controlled through simple ASCII strings over the Bluetooth RF link or directly through the hardware serial UART. Low power consumption. Secure and robust communication link. • FHSS (Frequent Hopping Spread Spectrum) • 56-bit encryption, and 10 alphanumeric Personal Identification Number (PIN) • Error correction schemes for guaranteed packet delivery Manufacturing Trad
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 3 – AT Commands, S-Registers, and Result Codes Chapter 2 – Installation and Cabling Step 1 – Attaching the Adapter to a Fixed Location The Serial-to-Bluetooth Adapter is design to be used on the desktop or to be panel-mounted. To attach the bracket for panel-mounting, following these steps: 1. Typically, the adapter is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired location. The mounting holes must be separated by 4 -7/16
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 3 – AT Commands, S-Registers, and Result Codes Step 2 – Connect the Adapter to Your System Setup Example This example shows a BlueTooth Adapter setup at a fixed site and ready to communicate with the Bluetooth Adapter at a remote location. Connections for the MultiModem Using AC Power Turn off your computer. Place the adapter in a convenient location, and then connect it to your computer’s serial port, the phone line, and AC power. Connections for the MultiModem Using DC P
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 3 – AT Commands, S-Registers, and Result Codes Chapter 3 – AT Commands AT Command Reference Guide AT commands for the Serial-to-Bluetooth Adapter are published in a separate Reference Guide included on the product CD and posted on the Multi-Tech Web site. Using AT Commands Default Settings / Changing Configuration Parameters, such as the Bluetooth Name, Service Name, Class of Device and Serial Port settings can be viewed and configured. This can be done locally throug
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 3 – AT Commands, S-Registers, and Result Codes Setting Parameters This section covers how to send AT commands at the PC connected to a BlueTooth Adapter to query and set parameters for Bluetooth communication. Example of a Slave Command Sequence From Power Up: 1. Check and verify Communication to Slave. Sent : AT Reply:OK 2. Get information on Slave Bluetooth address. Sent : ATSI,1 Reply: 12-digit address OK 3. Set Slave
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 3 – AT Commands, S-Registers, and Result Codes Test Procedures Using AT Commands The following tesing procedures can be used with the MTS2BTA and the MTS2BTSMI. 1. Connect serial cable from computer to DB9 connector of each MTS2BTA, then attach antenna and power. Do this for both master and slave Bluetooth adapters. 2. Use terminal emulator like Hyperterminal or ZOC to communicate to Bluetooth socket modem using AT command set. Set baud rate to 9600bps. If MTS2BTA has label
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 3 – AT Commands, S-Registers, and Result Codes Disabling Flow Control Using AT Commands Using terminal screen with flow control enabled, issue commands to turn off flow control.l. Sent : ATSW22,3,1,0 // Set PIO3 as output and do not store in flash Reply: OK Sent : ATSW23,3,1,0 // Set PIO3 output high and do not store in flash Reply: OK To store setting in flash: Sent : ATSW22,3,1,1 // Set PIO3 as output and store in flash Rep
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 4 – Peripheral Devices Chapter 4 – Peripheral Devices Antenna Requirements Frequency Range 2.4-2.5 Ghz Impedance 50 ohm nominal VSWR <2.0:1 Gain 2 dBi Radiation Omni Polarization Vertical Wave Half Wave Dipole Connector Reverse Polarity SMA Plug An antenna that meets the requirements for use with the SocketWireless product can be ordered, for example, from Nearson. www.nearson.com Part number: S131AH – 2450S Pin Assignments for the Serial Port Female DB9
Inhaltszusammenfassung zur Seite Nr. 16
Appendix A – Regulatory Compliance Appendix A – Regulatory Compliance Regulatory Compliance Statements EMC, Safety, and R&TTE Directive Compliance The CE mark is affixed to this product to confirm compliance with the following European Community Directives: Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States relating to electromagnetic compatibility; and Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of
Inhaltszusammenfassung zur Seite Nr. 17
Appendix A – Regulatory Compliance New Zealand Telecom Warning Notice 1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a differ
Inhaltszusammenfassung zur Seite Nr. 18
Appendix B – Multi-Tech Warranty Statement and Product Repair Appendix B – Multi-Tech Warranty Statement and Product Repair Warranty Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of purchase is not provided, two, five, or ten years (depending on model) from date of shipment. MTS MAKES NO OTHER WARRANTY, EXPRESS OR I
Inhaltszusammenfassung zur Seite Nr. 19
Appendix C – Warranty and Service Repair Procedures for International Customers (Outside U.S.A. and Canada) Your original point of purchase Reseller may offer the quickest and most economical repair option for your Multi- Tech product. You may also contact any Multi-Tech sales office for information about the nearest distributor or other repair service for your Multi-Tech product. The Multi-Tech sales office directory is available at www.multitech.com/PARTNERS/Channels/offices/ In the e
Inhaltszusammenfassung zur Seite Nr. 20
Index Index A N AC power connections......................................................10 New Zealand Telecom Warning Notice ........................... 17 Antenna Requirements......................................................15 O Applications........................................................................4 AT commands...................................................................11 Ordering Replacement Parts............................................. 19 B P Bui
