Inhaltszusammenfassung zur Seite Nr. 1
RackMountedModems
ZDX Series Modem Racks
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
Copyright and Technical Support Rack Mounted Modems User Guide “ZDX” Style Device Rack S000338A, Revision A Copyright © 1998 - 2004 This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Contents Chapter 1 - Introduction and Description ....................................................................................................................4 Introduction.................................................................................................................................................................4 Description ...............................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Chapter 1 – Introduction and Description C C C CHAPTER HAPTER HAPTER HAPTER 1 - I 1 - I 1 - I 1 - INTRODUCTION AND NTRODUCTION AND NTRODUCTION AND NTRODUCTION AND D D D DESCRIPTION ESCRIPTION ESCRIPTION ESCRIPTION Introduction Welcome to the world of data communication. You have one of the finest modem racks made today. This owner's manual provides information that will enable you to install and operate the MultiModemZDX fax modems within your Multi-Tech ZDX modem rack. This manual covers the de
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 2 – Installation C C C CHAPTER HAPTER HAPTER HAPTER 2 - I 2 - I 2 - I 2 - INST NST NST NSTA A A ALLA LLA LLA LLATION TION TION TION Power Up Preliminaries The MultiModemZDX modems are shipped with the DTR signal controlled by the interface and the modem’s Command mode enabled. With rack-mount modems, we generally assume that your modems are used in a central site computer environment, with the modems connected to a mini or mainframe computer. We expect the main purpose will be to automat
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 2 – Installation 6. Ensure that the power on/off switch on the ZDX modem is in the On position before the modem is placed in the rack. The power on/off switch is not accessible when the modem is in the rack. 7. Slide a ZDX modem into one of the twelve available slots. Figure 2-1. Modem Installation 8. Connect the appropriate power cable on the back of the rack to the modem's power jack. You may have to hold the modem in place from the front while plugging in the power cable. The top pow
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 2 – Installation Rack Mounting Installation Procedure If the chassis is installed in a closed or multi-rack assembly, the operating temperature of the rack environment may be greater than the ambient temperature. Be sure to install the chassis in an environment that is compatible with the maximum rated ambient temperature. See Technical specifications in Chapter 1. When mounting the equipment in the rack make sure mechanical loading is even to avoid a hazardous condition, such as loading
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 3 – Service, Warranty and Tech Support C CHAPTER HAPTER 3 - S 3 - SERVICE ERVICE, W , WARRANT ARRANTY AND Y AND T TECH ECH C CHAPTER HAPTER 3 - S 3 - SERVICE ERVICE, W , WARRANT ARRANTY AND Y AND T TECH ECH S S S SUPPORT UPPORT UPPORT UPPORT Introduction This chapter starts out with statements about your rack 2-year warranty. The next section, Tech Support, should be read carefully if you have questions or problems with your rack. It includes the technical support telephone numbers, spac
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 3 – Service, Warranty and Tech Support Extended two-year overnight replacement service agreements are available for selected products. Please call MTS customer service at (888) 288-5470 or visit our web site at www.multitech.com/PARTNERS/Programs/orc/ for details on rates and coverage. Please direct your questions regarding technical matters, product configuration, verification that the product is defective, etc., to our Technical Support department at (800) 972-2439 or email support@mul
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 3 – Service, Warranty and Tech Support About the Internet Multi-Tech is a commercial user on the Internet, and we retrieve messages from our customers on a periodic basis. If you prefer to receive technical support via the Internet, please address your message to: tsupport@MultiTech.com Technical Support mtsmktg@MultiTech.com Marketing Dept. mtssales@MultiTech.com Sales Dept. international@MultiTech.com International Marketing & Sales writers@Multitech.com Publications Dept. Multi-Tech's
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 4 – Appendix A A A APPENDIX PPENDIX PPENDIX PPENDIX Safety Requirements 1. No manual adjustments to the equipment are necessary for connection to main power within rated voltage and frequency. 2. The power supply cord is intended to serve as the disconnect device. The socket-outlet must be installed near the equipment and be easily accessible. 3. To reduce the risk of shock, all openings should be covered during normal operation of the equipment. 4. Use only plugs and cordage for con
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 4 – Appendix Power Requirements AC 90-240V, 50/60 Hz, 2.0A CAUTION: For continued protection against risk of fire, replace with same type and rating of fuse. Safety requirements are not fulfilled unless the equipment is connected to a wall outlet socket that is provided with an earth contact. Mains Wiring Instructions (U.K.) When wiring the mains plug the following instructions must be followed: The core which is coloured green and yellow must be connected to the terminal in the plug
Inhaltszusammenfassung zur Seite Nr. 13
Notice N N N NOTICE OTICE OTICE OTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of th
