Inhaltszusammenfassung zur Seite Nr. 1
Alcatel-Lucent OmniAccess
Wireless LAN Access Point Family
OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65,
OAW-AP70, OAW-AP80
Inhaltszusammenfassung zur Seite Nr. 2
Alcatel-Lucent OmniAccess access points (APs) are small, lightweight and can be securely deployed in a variety of locations such as on walls, cubicles, desktops, and in the ceiling. The AP antenna diversity allows for the best possible signal processing using dual, omni-directional antennas. 2 Alcatel-Lucent | OmniAccess AP
Inhaltszusammenfassung zur Seite Nr. 3
Alcatel-Lucent OmniAccess access points (APs) are small, lightweight and can be securely deployed in a variety of locations such as on walls, cubicles, desktops, and in the ceiling. The AP antenna diversity allows for the best possible signal processing using dual, omni-directional antennas. Alcatel-Lucent OmniAccess APs work with the Alcatel-Lucent OmniAccess 6000, OmniAccess 4324, OmniAccess 4308, and OmniAccess 4304 to provide a high performance, centrally managed, wireless mobility solution
Inhaltszusammenfassung zur Seite Nr. 4
ADAPTIVE RF MANAGEMENT (ARM), RF PLANNING, DYNAMIC CALIBRATION, AND ADVANCED TROUBLESHOOTING With previous generations of WLAN technology, AP deployment was an expensive proposition. Corporations had to painstakingly undertake extensive RF planning, complete site surveys, climb into ceilings to run new cabling, and mount the APs. In turn, APs were deployed sparingly. Alcatel-Lucent OmniAccess APs change this deployment model through Adaptive Radio Management (ARM) technology that negates the
Inhaltszusammenfassung zur Seite Nr. 5
In addition, the Alcatel-Lucent OmniAccess Wireless system uniquely provides automatic tuning of the mobile environment through sophisticated system calibration and distributed, radio resource allocation technologies. ARM and Alcatel-Lucent OmniAccess Aps constantly scan the ambient radio environment to determine coverage holes, interference, and congestion. If discovered, Alcatel-Lucent OmniAccess APs automatically change channel assignment or power transmit levels to ensure optimal operation
Inhaltszusammenfassung zur Seite Nr. 6
ZERO CONFIGURATION, PLUG-AND-PLAY DEPLOYMENT Alcatel-Lucent OmniAccess APs are completely plug-and-play, requiring no manual configuration. Alcatel-Lucent OmniAccess APs can The WLAN switch automatically be attached to any existing Ethernet configures each OmniAccess AP switch or IP router and across any based on the policies and subnet boundary. Once connected, configurations set by the the APs self configure by administrator. This automation automatically building a secure IP dramatically si
Inhaltszusammenfassung zur Seite Nr. 7
UNPARALLELED SECURITY Acting as an air monitor, the Alcatel-Lucent OmniAccess APs deliver 100 Mbps of intrusion analysis and relays alerts back to the OmniAccess WLAN switch. Alcatel-Lucent OmniAccess APs detect and thwart rogue APs and wireless intrusions such as DoS and man-in- the-middle attacks. Since the OmniAccess WLAN switch manages Alcatel-Lucent’s OmniAccess APs, no critical configuration information – such as passwords, encryption keys, or digital certificates – is stored on the APs. I
Inhaltszusammenfassung zur Seite Nr. 8
SECURE REMOTE OFFICE DEPLOYMENT Alcatel-Lucent OmniAccess APs can be securely deployed in a remote office, letting network managers easily extend their corporate 802.1X framework across the Internet. Alcatel-Lucent OmniAccess APs use the industry standard IPSec protocol to create secure tunnels that connect APs to a central OmniAccess WLAN switch. Tunneling traffic inside IPSec prevents an attacker from intercepting messages between the switch and AP, allows APs to be deployed across an un-tru
Inhaltszusammenfassung zur Seite Nr. 9
The Alcatel-Lucent OmniAccess AP Family ALCATEL-LUCENT OMNIACCESS AP41 The Alcatel-Lucent OmniAccess AP41 is a single radio, multi-band (802.11 a/b/g) thin access point. The OmniAccess AP41 has an internal antenna and can be deployed via wall jacks in the user space. It is powered by standards compliant PoE (power-over-Ethernet). The OmniAccess AP41 is designed for cost-sensitive applications below the ceiling and is ideal for dense deployments in user OmniAccess AP41 space serving a mix of 80
Inhaltszusammenfassung zur Seite Nr. 10
ALCATEL-LUCENT OMNIACCESS AP65 The Alcatel-Lucent OmniAccess AP65 (OAW-AP65) is Alcatel-Lucent’s smallest, dual-radio thin architecture access point that provides concurrent operation of 802.11a and 802.11b/g services. Designed for use exclusively with OmniAccess WLAN switches, with its rear mounted Ethernet interface and integrated ceiling tile rail mounting point, the OAW-AP65 self contained, low-profile design is ideally suited for discrete deployment applications. The OAW-AP65 is a multi-
Inhaltszusammenfassung zur Seite Nr. 11
PRODUCT FEATURES AND BENEFITS ALCATEL-LUCENT OMNIACCESS AP41 Remote AP for home office/low-cost deployments n Supports 802.11a or b/g n Internal omni-directional high-gain antennas with 180-degree rotation n Configurable as AP, air monitor, or both simultaneously n 802.3af-compliant power-over-Ethernet (PoE) ALCATEL-LUCENT OMNIACCESS AP60 AND AP61 Indoor enterprise deployments with single radio usage requirements n Supports 802.11a or b/g n 802.3af-compliant power over Ethernet (PoE) n Two RP-SMA
Inhaltszusammenfassung zur Seite Nr. 12
PRODUCT FEATURES AND BENEFITS ALCATEL-LUCENT OMNIACCESS AP65 Indoor enterprise deployments with aesthetic/discreetness requirements with multi-radios n Supports 802.11a or b/g n Plenum rated n Two integral tri-band omni-directional high- n Kensington lock interface gain antennas with 90-degree movement n Antenna diversity n 802.3af-compliant power-over-Ethernet (PoE) n Configurable as AP, air monitor, or both simultaneously ALCATEL-LUCENT OMNIACCESS AP70 Indoor enterprise deployments with flexibil
Inhaltszusammenfassung zur Seite Nr. 13
Technical Specifications Antenna Specifications Radio Specifications OAW-AP41 INTEGRAL 802.11A • Single, integral, tri-band, omni-directional Frequency bands antenna with articulating movement. • 5.150 ~ 5.250 GHz (lower band): 4 channels • Non-detachable (for OAW-AP61 and OAW-AP70 only) Antenna Specifications • 5.250 ~ 5.350 GHz (middle band): 4channels • 5.500 ~ 5.700 GHz (ETSI band): 11 channels Gain: (for OAW-AP70 only) • 2.4-2.5 GHz / 2.11 dBi • 5.725 ~ 5.825 GHz (higher band): 4 channels
Inhaltszusammenfassung zur Seite Nr. 14
Data rates 802.11g • 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel Frequency bands Multi-mode radio band • 2.412 ~ 2.462 GHz (USA, Canada) • 802.11a or 802.11b/g selectable via software • 2.412 ~ 2.472 GHz (ETSI) • 2.412 ~ 2.484 GHz (Japan) RADIO SPECS 2.4GHZ - IEEE 802.11B Radio technology Frequency Bands Supported • OFDM • 2.400 ~ 2.4835/2.497 GHz (Global), channels country specific Modulation type Radio technology • CCK, BPSK, QPSK, 16-QAM, 64-QAM • Direct sequence spread spectrum (DSSS
Inhaltszusammenfassung zur Seite Nr. 15
MAC OAW-AP65 OAW-AP80 • CSMA/CA with ACK RADIO SPECS 5GHZ - IEEE 802.11A RADIO SPECS - 5GHZ - IEEE 802.11A Operating channels Frequency Bands Supported Frequency Bands Supported • US, Canada – 11 • 5.150 ~ 5.250GHz (low band), • 5.150 ~ 5.250 GHz (low band), • ETSI – 13 country specific country specific • Japan – 13 • 5.250 ~ 5.350GHz (mid band), • 5.250 ~ 5.350 GHz (mid band), country specific country specific Data rates • 5.470 ~ 5.725GHz (Europe), country • 5.470 ~ 5.725 GHz (Europe), •
Inhaltszusammenfassung zur Seite Nr. 16
RADIO SPECS – 2.4GHZ - IEEE 802.11B Transmit power OAW-AP65 • Configurable by system administrator • Height: 3.94 in. (100 mm) Frequency Bands Supported • Width: 3.94 in. (100 mm) • 2.400 ~ 2.4835/2.497 GHz, channels MAC country specific • Depth: 1.47 in. (37 mm) • CSMA/CA with ACK • Need weight Radio technology Operating channels • Direct sequence spread spectrum (DSSS) • US, Canada – 11 OAW-AP70 Modulation type • ETSI – up to 13 • Height (antenna retracted): 6.57 in. (167 mm) • CCK, BPSK, Q
Inhaltszusammenfassung zur Seite Nr. 17
OAW-AP65 OAW-AP80 Mechanical Interfaces • 1 x 10/100 Base-TX (RJ-45) auto-sensing • (Ready) Power on/off (provided on Power injector) OAW-AP41 MECHANICAL INTERFACES Ethernet interface • Wall-mount lugs • Auto-sensing MDI/MDX Power Requirements • PoE 48VDC / 220mA power over Ethernet OAW-AP60 AND AP61 AND OAW-AP70 OAW-AP41 (802.3af compliant) • Standard Kensington MicroSaver security • 48V DC / 200mA power-over-Ethernet • Supports Serial over Ethernet cable interface (not supplied) (802.3af compl
Inhaltszusammenfassung zur Seite Nr. 18
OAW-AP80 OAW-AP80 Environmental Requirements • Ethernet IEEE 802.3 / IEEE 802.3u • cULus listed OAW-AP41, AP60, AP61, AP65 AND • Wireless IEEE 802.11a/b/g • PSE Mark (AC Power Supply) OAW-AP70 • PPP over Ethernet RFC2516 • IEC 60950 CB certificate and report Temperature • UL Listed (UL60950) • Operating: 0 to 50º C (32 to 122º F) Safety • UL Listed (Canadian Electrical Code/CSA 22.2 • Storage: 0 to 70º C (32 to 158º F) No. 60950) OAW-AP41 • EN60950 / IEC60950 Humidity • cULus listed • 5%
Inhaltszusammenfassung zur Seite Nr. 19
Ordering information OAW-AP41 OmniAccess AP41 access point with single Integral Tri-Band Antenna. Supports 802.11a or 802.11b/g (SW selectable). Supports one 10/100 Base-T (RJ-45) Ethernet Interface (Power over Ethernet capable) and Installation Guide. OAW-AP60 OmniAccess AP60 access point with dual RP-SMA external antenna connectors (supports diversity). Supports 802.11a or 802.11b/g (SW selectable). Supports one 10/100BaseT (RJ-45) Ethernet Interface (Power and Serial over Ethernet capable)
Inhaltszusammenfassung zur Seite Nr. 20
Alcatel-Lucent OmniAccess Wireless LAN Access Point Family OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65, OAW-AP70, OAW-AP80 Alcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. © 2007 Alcatel-Lucent. All rights reserved. P/N 031669-00 Rev D 7/07 www.alcatel-lucen
