Inhaltszusammenfassung zur Seite Nr. 1
TEW-310APB
2.4 GHz Wireless Access Point + Bridge
User's Guide
Rev. 050302
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS 1.Package Contents 3 2.Introduction 4 3.Wireless Basics 7 4.Getting Started 10 5.Using the Configuration Utility 12 6.Troubleshooting 20 7.Networking Basics 25 8.Technical Specifications 44 9. Contacting Technical Support 46
Inhaltszusammenfassung zur Seite Nr. 3
1. Package Contents Fig. 1.1 Contents TEW-310APB Enhanced 2.4GHz Wireless Access Point Power Supply 5V DC, 2.0A Manual on CD Quick Installation Guide Ethernet Cable Note: Using a power supply with a different voltage rating than the one included with the TEW-310APB will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements Computer with Windows, Macintosh, or Linux-based operating system with an installe
Inhaltszusammenfassung zur Seite Nr. 4
2. Introduction TEW-310APB Wireless Access Point is an enhanced 802.11b high- performance, wireless access point. It is an ideal way to extend the reach and number of computers connected to your wireless network. Unlike most 802.11b access points, the TEW-310APB is capable of data transfer speeds up to 22 Mbps (compared to the standard 11 Mbps) when used with other TRENDnet products such as the TEW-301PC PCMCIA CardBus Adapter and TEW-303PI Wireless PCI Adapter. After completing the steps
Inhaltszusammenfassung zur Seite Nr. 5
Features and Benefits Up to 2X Faster than regular 802.11b Products - high-speed wireless data transfer rates up to 22Mbps. With twice the data rate and capacity, the TEW-310APB delivers media rich content such as digital images, videos, and MP3 files much faster than standard 802.11b networks Fully 802.11b Compatible Fully compatible with the IEEE 802.11b standard and interoperable with all existing 802.11b compliant devices Improved Performance Up to 20% faster data transfer rates on st
Inhaltszusammenfassung zur Seite Nr. 6
LED Indicators LED stands for Light-Emitting-Diode. The TEW-310APB has three LEDs: Power Link TX/RX Fig. 2.2 Power - Solid red light indicates receiving power TX/RX (Wireless Network) - Solid green light indicates wireless connection enabled, blinking green indicates wireless network activity Link (Ethernet Port) - Solid green light indicates good Ethernet connection on the RJ-45 port, blinking green indicates Ethernet port activity 6
Inhaltszusammenfassung zur Seite Nr. 7
3. Wireless Basics TRENDware wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or wherever a wireless network is available. Strictly adhering to the IEEE standard, the TRENDware wireless family of products will allow you to access the data you want, when and where you want it. No longer will you be limited to one location or forced to run new wiring through your home or office. You will be able
Inhaltszusammenfassung zur Seite Nr. 8
Network Expansion - Wireless technology allows the network to go where wires cannot go. Reduced Cost-of-Ownership - While the initial investment required for Wireless LAN hardware might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle costs will be significantly lower. Long-term cost benefits are greatest in dynamic environments requiring frequent moves, adds, and changes. Scalability - Wireless Local Area Networks (WLANs) can be configured in a
Inhaltszusammenfassung zur Seite Nr. 9
objects that the wireless signal must pass thru may limit range. Typical ranges vary depending on the types of materials and any background RF (radio frequency) noise in your home or business. The key to maximizing range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the wireless Access Point and your receiving device to a minimum - Each wall or ceiling can reduce your TRENDnet Wireless product's range from 3-90 feet (1-30 meters.) Position your Acc
Inhaltszusammenfassung zur Seite Nr. 10
4. Getting Started Right out of the box, with its default settings, the TEW-310APB will automatically connect with other TRENDnet products. For the price of a single IP Address from your Broadband Internet Service provider you can share the Internet with all the computers on your local network, without sacrificing speed or security, using TRENDware networking products. IP ADDRESS Please note: If you have a DHCP-capable router, please configure the TEW-310APB to disable its DHCP Server and
Inhaltszusammenfassung zur Seite Nr. 11
Setting Up an Infrastructure Network Please remember that TRENDware wireless devices are pre-configured to connect together, right out of the box, with the default settings. You will need a broadband Internet access (Cable/DSL) 1 1 subscription. Consult with your Cable/DSL provider for proper installation of the 2 2 modem. Configure TEW-310APB. Refer to the Quick Installation Guide for 3 3 setting up the Access Point. Note: If you already have a DHCP server (e.g. Internet Router) on t
Inhaltszusammenfassung zur Seite Nr. 12
5. Using the Configuration Menu The Configuration Menu for the TEW-310APB is web-based. When using the configuration program, please consider the following: You will need a JavaScript-enabled web-browser such as the Internet Explorer 4.0 or higher, or the Netscape Navigator 4.0 or higher. The computer that you are using for initial configuration must setup to receive IP address from DHCP server (or have an IP Address within the same range as the IP Address of the TEW-310APB). The TEW-310
Inhaltszusammenfassung zur Seite Nr. 13
· Open the web browser · Type in the IP Address of the Access Point (default http://192.168.1.1) Fig. 5.1 (The IP Address shown in the example above is the default setting. Use this IP address when connecting to a network consisting of other TRENDnet devices set to their default settings. If you have changed the IP Address of the TEW-310APB to conform to a network other than one with TRENDnet devices, at their default setting, then input that IP Address in the web browser, instead of th
Inhaltszusammenfassung zur Seite Nr. 14
Basic Settings you can make changes to the following items: AP name SSID Channel WEP Key Mode Passphrase Fig. 5.4 AP Name: You may choose to rename your Access Point, especially if you have more than one Access Point on your network. SSID: (Service Set Identifier) “default” is the factory setting. The SSID is a unique name that identifies a network. All devices on a network must share the same SSID name in order to communicate on the network. If you choose to change the SSID from the
Inhaltszusammenfassung zur Seite Nr. 15
Passphrase: Available in HEX mode only. Type in any phrase up to 31 characters, click Generate, and the unit will generate a set of 4 keys automatically. The same phrase on compatible 11Mbps wireless devices will generate the same set of keys. You can also manually enter the 4 keys. Please note that only one key can be activated at a time. Click Apply if you have made any changes or additions. Click Cancel to discard the changes. IP Settings Click on this tab to change device's IP Addresses.
Inhaltszusammenfassung zur Seite Nr. 16
Advanced Settings AP Mode There are 4 modes available. AP: Access Point mode. Bridge wireless clients to wired Ethernet network. AP Client: Acts as a wireless client and connects to a remote Access Point. This is used to convert an Ethernet device to Wireless Client. Fig. 5.6 You must enter the remote AP's MAC address in the Remote AP BSS ID. It is best to use another TEW-310APB as the Remote AP, please find AP's LAN MAC address in the Status page and enter it here. (Note: When the device
Inhaltszusammenfassung zur Seite Nr. 17
RTS Threshold: This value should remain at its default setting of 2,432. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2,432 are recommended. Fragmentation: This value should remain at its default setting of 2,346. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2,346. Setting the Fragmentation Threshold too low may result in poor performance. DTIM I
Inhaltszusammenfassung zur Seite Nr. 18
Security Password: Change the login User Name and Password in this screen. Administrator ID: This is the login User Name for the browser configuration. Default is admin, you can enter a name with up to 15 characters. AP Password New: Enter the new password (up to 15 characters). Fig. 5.7 Confirm: Enter the new password again. Click Apply to save the new User Name and Password. Click Cancel to discard the changes. MAC Filter: Use MAC Filters to allow or deny wireless connection to the TEW-
Inhaltszusammenfassung zur Seite Nr. 19
Tools Backup Settings: The current device settings can be saved as a file onto the local hard drive by clicking Backup and then follow the instructions on the screen to save the configuration file to desired Fig. 5.8 Restore Settings: The saved settings can be loaded back on the TEW- 310APB by entering the correct path or clicking Browse and locate the correct saved file location. When you have selected the settings file, click Restore to load the settings. Restore to default settings:
Inhaltszusammenfassung zur Seite Nr. 20
6. Troubleshooting Based on Windows XP Operating System This chapter provides solutions to problems that can occur during the installation and operation of the TEW-310APB Wireless Access Point. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. Note: It is recommended that you use an Ethernet connection to configure the TEW-310APB Access Point. 1.The computer used to configure the TEW-310APB cannot access t
