Bedienungsanleitung NETGEAR HDX111

Inhaltszusammenfassung zur Seite Nr. 1

Preparing for Installation Installing the HDX111 Adapters

To prepare for installation: Follow these steps:
1. Plug an HDX111 Adapter into a power outlet near your router. Use the blue Ethernet
1. Before you begin, verify the following:
HDX111 Powerline HD Plus Ethernet Adapter
from the HDX111 package to connect it to a LAN port on the router so that the
• Your Ethernet network is set up and an Ethernet port is available on your router.
Powerline network can gain access to the Internet.
• Your

Inhaltszusammenfassung zur Seite Nr. 2

The second HDX111 Adapter discovers the security AP. The second HDX111 An appliance plugged in near the HDX111 Adapter is affecting network Understanding Powerline Network Security Adapter’s AP light blinks 3 times and goes off. It is now configured with the same performance. Plug the appliance into the pass-through AC outlet of the HDX111 Powerline devices on the same network must use an identical network ID and encryption network ID and encryption key as the first adapter. Adapter if the po