Inhaltszusammenfassung zur Seite Nr. 1
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-470
SD / 3G HD-SDI Scaler
P/N: 2900-300035 Rev 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 2 2.3 Recycling Kramer Products 3 3 Overview 4 3.1 Defining the VP-470 SD / 3G HD-SDI Scaler 5 4 Connecting the VP-470 7 5 Operating the VP-470 SD / 3G HD-SDI Scaler 8 5.1 Using the Front Panel Buttons 8 5.2 Using the OSD 8 6 Technical Specifications 12 Figures Figure 1: VP-470 SD / 3G HD-SDI Scaler 5 Figure 2: Connecting the VP-470 SD / 3G HD-SDI Scaler 7 VP-470 – Co
Inhaltszusammenfassung zur Seite Nr. 4
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
Inhaltszusammenfassung zur Seite Nr. 5
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades i are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance: Use only good quality connection cables (we reco
Inhaltszusammenfassung zur Seite Nr. 6
2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN fa
Inhaltszusammenfassung zur Seite Nr. 7
3 Overview The VP-470 is a high−performance digital scaler for 3G HD−SDI signals. It up or down−scales the incoming SDI signal to resolutions up to 1080p, and routes it to two identical SDI outputs. The following output resolutions are supported: SDTV: 480i @59.94Hz, 576i @50Hz HDTV: 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @23.98/24/25/29.97/30Hz 3G: 1080p @50/59.94/60Hz The VP-470 also features: A maximum data rate of 3Gbps Multi-standard operation: SDI (SMPTE
Inhaltszusammenfassung zur Seite Nr. 8
3.1 Defining the VP-470 SD / 3G HD-SDI Scaler This section defines the VP-470. Figure 1: VP-470 SD / 3G HD-SDI Scaler VP-470 - Overview 5 5
Inhaltszusammenfassung zur Seite Nr. 9
# Feature Function 1 PROGRAM USB Use for firmware upgrade Connector 2 SDI IN BNC Connector Connect to the SDI source 3 LOOP BNC Connector Connect to an additional unit or a local display. The signal is reclocked and equalized 4 SDI OUT BNC Connect to the SDI acceptor Connector (1 and 2) 5 5V DC Connect to the +5V DC power adapter, center pin positive 6 ON LED Lights green when the unit is powered on 7 SDI LED Lights blue when an SDI signal is detected on the input 8 MENU Button Pr
Inhaltszusammenfassung zur Seite Nr. 10
4 Connecting the VP-470 Always switch off the power to each device before connecting it to your VP-470. After connecting your VP-470, connect its power and then ! switch on the power to each device. To connect the VP-470 as illustrated in the example in Figure 2: 1. Connect a broadcast SDI camera to the SDI IN BNC connector. 2. Connect the LOOP BNC connector to a local display. 3. Connect the SDI OUT 1 BNC connector to a non-linear editor. 4. Connect the SDI OUT 2 BNC connector to
Inhaltszusammenfassung zur Seite Nr. 11
5 Operating the VP-470 SD / 3G HD-SDI Scaler The VP-470 is operated directly via the front panel buttons and via the OSD menu (see Section 5.2). 5.1 Using the Front Panel Buttons During normal operation (without the OSD), the front panel buttons perform in the following manner: MENU: Displays the OSD Main Menu (see Section 5 .2). Press a second time to close the OSD FREEZE: Freezes the display. Press a second time to unfreeze the display MENU and -: Press together to set the
Inhaltszusammenfassung zur Seite Nr. 12
5.2.1 Example of Setting a Parameter To set the value of the brightness on the display output to 46: 1. From normal operation, press MENU. The OSD main menu appears on the screen. 2. Press the + or – button to select PICTURE. The PICTURE line background changes to blue. 3. Press ENTER. The PICTURE submenu is displayed. 4. Press the + or – button to select BRIGHTNESS. The BRIGHTNESS line background changes to blue. 5. Press ENTER. BRIGHTNESS and its current value change to green. 6
Inhaltszusammenfassung zur Seite Nr. 13
5.2.2 The Main Menu Parameter Function OUTPUT Set the output resolution (default is 720P 60): OUTPUT PAGE 1 RESOLUTION OUTPUT PAGE 2 RESOLUTION 480I 59 480i @59.94Hz 1080I 59 1080i @59.94Hz 576I 50 576i @50Hz 1080P 59 1080p @59.94Hz 720P 50 720p @50Hz 1080I 60 1080i @60Hz 720P 59 720p @59.94 1080P 60 1080p @60Hz 720P 60 720p @60Hz 1080P 23 1080p @23.98Hz 1080P 24 1080p @24Hz 1080P 25 1080p @25Hz 1080P 29 1080p @29.97Hz 1080P 30 1080p @30Hz 1080I 50 1080
Inhaltszusammenfassung zur Seite Nr. 14
5.2.3 The PICTURE Menu Parameter Function CONTRAST Set the contrast BRIGHTNESS Set the brightness SATURATION Set the color saturation HUE Set the color hue SHARPNESS Set the image sharpness PICTURE RESET Reset the PICTURE parameters to their default state EXIT Exit the menu 5.2.4 The OSD SETTINGS Submenu Parameter Function POSITION LEFT-T (default), RIGHT-T, RIGHT-B, LEFT-B or CENTER TRANSPARENCY Set the OSD background between 0 (solid black) and 15 (transparent) MENU TIMEO
Inhaltszusammenfassung zur Seite Nr. 15
6 Technical Specifications INPUT: 1 SDI/HD-SDI/3G HD-SDI on a BNC connector OUTPUTS: 1 SDI/HD-SDI/3G HD-SDI on a BNC connector (loop) 2 SDI/HD-SDI/3G HD-SDI on BNC connectors INPUT RESOLUTIONS: SDTV: 480i @59.94Hz, 576i @50Hz, HDTV: 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @23.98/24/25/29.97/30Hz, 1080sF @23.98/24/25/29.97/30Hz 3G: 1080p @50/59.94/60 1080sF @23.98/24 inputs don't support 480i/576i output; for 1080sF25/29.97/30 inputs, the OSD info. shows 1080i50/59.94/6
Inhaltszusammenfassung zur Seite Nr. 16
Inhaltszusammenfassung zur Seite Nr. 17
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING Disconnect the unit from the power ! supply before opening and servicing P/N: 2900-300035 Rev: 1
