Inhaltszusammenfassung zur Seite Nr. 1
BIPAC-741 GE V2.0
ADSL Firewall Router
with 4-port 10/100M switch
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents CHAPTER 1 ......................................................................... 1 INTRODUCTION ................................................................................................................................... 1 1.1 An Overview of BIPAC-741 GE V2.0................................................................................... 1 1.2 Package Contents ......................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Billion BIPAC-741 GE V2.0 ADSL Firewall Router Problems with the WAN Interface ............................................................................................. 42 Problems with the LAN Interface .............................................................................................. 42 APPENDIX A .................................................................... 43 SPECIFICATION .............................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1 Introduction 1.1 An Overview of BIPAC-741 GE V2.0 The BIPAC-741 GE V2.0 router provides a high-speed ADSL port, a 4-port 10/100M Base-T Ethernet switch for high-speed Internet browsing. It can support downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1024Kbps. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their needs and budgets. It is compliant with Multi-Mode standard (ANSI T1.413,
Inhaltszusammenfassung zur Seite Nr. 6
Billion BIPAC-741 GE V2.0 ADSL Firewall Router dedicated local web server, even though the server now has a different IP address. In this example, the product is on the Internet and vulnerable to attacks, but the server is protected. Virtual Server can also be used to re-task services to multiple servers. For instance, the product can be set to allow separated FTP, Web, and Multiplayer game servers to share the same Internet-visible IP address while still protecting the servers and LAN us
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Introduction Firewall: Supports SOHO firewall with NAT technology. Automatically detects and blocks the Denial of Service (DoS) attack. The URL-blocking, packet filtering and SPI are also supported. The hacker’s attack will be recorded associated with timestamp in the security logging area. More firewall features will be added continually, please visit our web site to download latest firmware. Domain Name System (DNS) relay: provides an easy way to map the domain name (a friendly
Inhaltszusammenfassung zur Seite Nr. 8
Billion BIPAC-741 GE V2.0 ADSL Firewall Router Web based GUI: supports web based GUI for configuration and management. It is user-friendly with an on-line help, providing necessary information and assist user timing. It also supports remote management capability for remote users to configure and manage this product. Firmware Upgradeable: the device can be upgraded to the latest firmware through the WEB based GUI. Rich management interfaces: Supports flexible management interfaces with loc
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 2 Using BIPAC-741 GE V2.0 2.1 Cautions for using the BIPAC-741 GE V2.0 Do not place the BIPAC-741 GE V2.0 under high humidity and high temperature. Do not use the same power source for BIPAC-741 GE V2.0 with other equipment. Do not open or repair the case yourself. If the BIPAC-741 GE V2.0 is too hot, turn off the power immediately and have a qualified serviceman repair it. Place the BIPAC-741 GE V2.0 on a stable surface. Only use the power adapter that comes with the package.
Inhaltszusammenfassung zur Seite Nr. 10
Billion BIPAC-741 GE V2.0 ADSL Firewall Router 6 LAN port 4 Lit when connected to Ethernet device Green for 100Mbps; Orange for 10Mbps Blinking when data transmit/received 7 MAIL Lit when there is email in the email account PPP Lit when there is a PPPoA/PPPoE connection 9 13 ADSL Lit when successfully connected to an ADSL DSLAM 2.3 The Rear Ports Port Meaning 1 Connect the supplied RJ-11 cable to this port when LINE connecting to the ADSL/telephone network. 2 Connect a RS-232
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Using BIPAC-741 GE V2.0 2.4 Cabling The most common problem is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. 7
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 3 Configuration The BIPAC-741 GE V2.0 can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs that communicate with the BIPAC-741 GE V2.0, either to configure the device or for ne
Inhaltszusammenfassung zur Seite Nr. 13
Billion BIPAC-741 GE V2.0 ADSL Firewall Router 3.3 Configuring PC in Windows 3.3.1 For Windows 98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 9
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 3 Configuration 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration. 10
Inhaltszusammenfassung zur Seite Nr. 15
Billion BIPAC-741 GE V2.0 ADSL Firewall Router 3.3.2 For Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 11
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 3 Configuration 3.3.3 For Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 12
Inhaltszusammenfassung zur Seite Nr. 17
Billion BIPAC-741 GE V2.0 ADSL Firewall Router 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 13
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 3 Configuration 3.3.4 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties. 14
Inhaltszusammenfassung zur Seite Nr. 19
Billion BIPAC-741 GE V2.0 ADSL Firewall Router 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6. Click OK to finish the configuration. 15
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 3 Configuration 3.4 Factory Default Settings Before configurating this BIPAC-741 GE V2.0 , you need to know the following default settings. 1. Web Configurator Username: admin Password : admin 2. Device IP Network settings in LAN site IP Address : 192.168.1.254 Subnet Mask : 255.255.255.0 3. ISP setting in WAN site PPPoE 4. DHCP server DHCP server is enabled. Start IP Address : 192.168.1.100 IP pool counts : 100 3.4.1 Username and Password The default username
