Inhaltszusammenfassung zur Seite Nr. 1
Netopia Router
Reference Guide
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Copyright © 1998 Netopia, Inc. v.298 All rights reserved. This manual and any associated artwork, software and product designs are copyrighted with all rights reserved. Under the copyright laws such materials may not be copied, in whole or part, without the prior written consent of Farallon Communications. Under the law, copying includes translation to another language or format. Netopia, Inc. 2470 Mariner Square Loop Alameda, CA 94501-1010 U.S.A. Patents EtherWave daisy-cha
Inhaltszusammenfassung zur Seite Nr. 3
Contents Chapter 1 — Introduction.......................................................... 1-1 How to use this guide .................................................... 1-2 Netopia models.................................................... 1-3 Connecting to the Advanced Configuration screens........... 1-4 G Connecting a modem to the SmartPort...................1-4 B Navigating through the Advanced Configuration screens ........................................................................
Inhaltszusammenfassung zur Seite Nr. 4
iv Reference Guide Readying computers on your local network....................... 3-2 Connecting to a LocalTalk network— for 400 series models.................................................... 3-3 Connecting to an Ethernet network.................................. 3-4 EtherWave ........................................................... 3-5 10Base-T............................................................. 3-7 Thick and Thin Ethernet ........................................ 3-8 Chapter
Inhaltszusammenfassung zur Seite Nr. 5
Contents v AppleTalk Setup for Small Office models.......................... 6-7 AppleTalk Setup for Corporate models ............................. 6-9 EtherTalk Setup.................................................... 6-9 LocalTalk Setup.................................................. 6-11 AURP setup ....................................................... 6-12 Chapter 7 — Security................................................................ 7-1 Suggested security measures..............
Inhaltszusammenfassung zur Seite Nr. 6
vi Reference Guide Establishing a dial-on-demand (DOD) connection call..................................................... 8-5 Establishing a manual connection call ................... 8-8 Troubleshooting............................................................. 8-9 Chapter 9 — Monitoring Tools ................................................... 9-1 Status overview............................................................. 9-1 General Status.............................................
Inhaltszusammenfassung zur Seite Nr. 7
Contents vii Uploading configuration files ............................. 10-16 Transferring configuration and firmware files with TFTP .................................................................. 10-17 Updating firmware ............................................ 10-18 Downloading configuration files ......................... 10-19 Uploading configuration files ............................. 10-20 Appendix A — Troubleshooting .................................................. A-1 Power outages .
Inhaltszusammenfassung zur Seite Nr. 8
viii Reference Guide About SPIDs.................................................................. C-2 Example SPIDs .................................................... C-3 Second directory number ............................................... C-3 Switch-specific uses ............................................. D-3 Backup number.................................................... D-4 Dynamic B-channel usage............................................... D-4 Other incoming call restrictions
Inhaltszusammenfassung zur Seite Nr. 9
1-1 Chapter 1 Introduction Your Netopia Router offers Advanced Configuration features in addition to the Easy Setup features. The advanced feature screens are accessed through the Main Menu of the Router’s console configuration screen. This Reference Guide documents the advanced features, including advanced testing, security, monitoring, and configuration features. This Reference Guide should be used as a companion to the Easy Setup configuration instructions in the Netopia R
Inhaltszusammenfassung zur Seite Nr. 10
1-2 Reference Guide How to use this guide This guide is organized into chapters describing each of the Netopia Router’s advanced features. You may want to read each chapter’s introductory section to familiarize yourself with the various features available. You can also use this summary to locate relevant sections: n To configure ISDN setup parameters, see “ISDN WAN Setup” on page 2-2. n To configure leased line setup parameters, see “Leased line WAN Setup” on page 2-5
Inhaltszusammenfassung zur Seite Nr. 11
Introduction 1-3 n For IP filters, see “About filters and filter sets” on page 7-6 and “Working with IP filters and filter sets” on page 7-16. n To transfer firmware and configuration files, see “Transferring configuration and firmware files with XMODEM” on page 10-12 or “Transferring configuration and firmware files with TFTP” on page 10-17. n To secure your network with SecurID, see Chapter 8, “Token Security Authentication.” Use the guide’s table of contents and index to locate section
Inhaltszusammenfassung zur Seite Nr. 12
1-4 Reference Guide Connecting to the Advanced Configuration screens There are three ways to connect to the Netopia Router’s advanced configuration screens: n Through the console port, using a local terminal (see the Getting Started Guide) n Using Telnet with the Router’s Ethernet port IP address (cannot be used for initial configuration) n Over analog phone lines using a modem and terminal emulation software (see “Connecting a modem to the SmartPort,” below) You can also retr
Inhaltszusammenfassung zur Seite Nr. 13
Introduction 1-5 Follow the manufacturer’s instructions when unpacking and preparing to use the PC Card modem. One end of the telephone cable connects to your modem, while the other end (RJ-11) connects to an analog telephone line wall socket (not an ISDN or leased line). SmartPort PC Card (PCMCIA) To attach the modem to the Netopia Router, pull down the rubber door that covers its SmartPort slots and insert the modem. You can use either slot. Inserting a PC Card (PCMCIA) modem i
Inhaltszusammenfassung zur Seite Nr. 14
1-6 Reference Guide Navigating through the Advanced Configuration screens To help you find your way to particular screens, some sections in this guide begin with a graphical path guide similar to the following example: • ISDN Line Config. WAN Advanced Main • Connection Profiles Setup Menu Config. • Answer Profile This particular path guide shows how to get to the WAN Setup screens. The path guide represents these steps: 1. Beginning in the Main Menu, select the Advanced Configuration
Inhaltszusammenfassung zur Seite Nr. 15
Introduction 1-7 Keyboard navigation Use your keyboard to navigate the Netopia Router’s configuration screens, enter and edit information, and make choices. The following table lists the navigation keys. To... Use These Keys... Move through selectable items in a Up, Down, Left, and screen or pop-up menu Right Arrow Execute action of a selected item or Return or Enter open a pop-up menu of options for a selected item Change a toggle value Tab (Yes/No, On/Off) Restore an entry or toggle
Inhaltszusammenfassung zur Seite Nr. 16
1-8 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 17
2-1 Chapter 2 Configuring ISDN and Leased Line Connections This chapter shows you how to configure the Netopia Router to make and receive network connections over an ISDN or leased line and how to control those connections. Topics include: n “ISDN WAN Setup” on page 2-2 shows you how to configure your ISDN Netopia Router for outgoing calls. n “Leased line WAN Setup” on page 2-5 shows you how to configure your SA/Serial, DDS, or T1 Netopia Router for outgoing calls. “Connecti
Inhaltszusammenfassung zur Seite Nr. 18
2-2 Reference Guide ISDN WAN Setup • Line Configuration Advanced Main WAN • Connection Profiles Menu Setup Configuration • Default Answer Profile The ISDN WAN Setup screen has three subscreens, each involving a different aspect of using the ISDN line to control connections to remote IP or IPX networks. Note: If you have completed Easy Setup (see the Getting Started Guide), the information you have already entered will appear in some of the Advanced Configuration screens. To
Inhaltszusammenfassung zur Seite Nr. 19
Configuring ISDN and Leased Line Connections 2-3 Note: If your ISDN Line Configuration screen contains items that are not discussed in this section, such as SPIDs, see Appendix C, “ISDN Configuration Guide.” The ISDN Line Configuration screen consists of up to three pop-up menus and up to four editable fields. North America ISDN ISDN Line Configuration models only Circuit Type... Switched Switch Type...
Inhaltszusammenfassung zur Seite Nr. 20
2-4 Reference Guide ISDN Line Configuration Circuit Type... Permanent B-Channel Usage... B1 Data Link Encapsulation... PPP Enter information supplied to you by your ISDN phone company. From the pop-up menu, select the appropriate B-channel, such as B1, B2, or Both. Then go to step 7. Note: A permanent ISDN circuit type only supports 64 kbps and 128 kbps B-channel usages. 3. Select Switch Type and press Return.
