Inhaltszusammenfassung zur Seite Nr. 1
Installation and Operation Manual
FCD-IPM
E1/T1 or Fractional E1/T1
Modular Access Device
with Integrated Router
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
FCD-IPM E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router Installation and Operation Manual Notice This manual contains information that is proprietary to RAD Data Communications Ltd. ("RAD"). No part of this publication may be reproduced in any form whatsoever without prior written approval by RAD Data Communications. Right, title and interest, all information, copyrights, patents, know-how, trade secrets and other intellectual property or other proprietar
Inhaltszusammenfassung zur Seite Nr. 4
Limited Warranty RAD warrants to DISTRIBUTOR that the hardware in the FCD-IPM to be delivered hereunder shall be free of defects in material and workmanship under normal use and service for a period of twelve (12) months following the date of shipment to DISTRIBUTOR. If, during the warranty period, any component part of the equipment becomes defective by reason of material or workmanship, and DISTRIBUTOR immediately notifies RAD of such defect, RAD shall have the option to choose the
Inhaltszusammenfassung zur Seite Nr. 5
General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel. Warning Danger of electric shock! Avoid any contact with the marked sur
Inhaltszusammenfassung zur Seite Nr. 6
Handling Energized Products General Safety Practices Do not touch or tamper with the power supply when the power cord is connected. Line voltages may be present inside certain products even when the power switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist. Before working on equipment connected to power lines or telecommunication lines, remove jewelry or any oth
Inhaltszusammenfassung zur Seite Nr. 7
Connection of Data and Telecommunications Cables Data and telecommunication interfaces are classified according to their safety status. The following table lists the status of several standard interfaces. If the status of a given port differs from the standard one, a notice will be given in the manual. Ports Safety Status V.11, V.28, V.35, V.36, RS-530, SELV Safety Extra Low Voltage: X.21, 10 BaseT, 100 BaseT, Ports which do not present a safety hazard. Usually Unbalanced E1, E2, E3
Inhaltszusammenfassung zur Seite Nr. 8
Caution To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cords. Attention Pour réduire les risques s’incendie, utiliser seulement des conducteurs de télécommunications 26 AWG ou de section supérieure. Some ports are suitable for connection to intra-building or non-exposed wiring or cabling only. In such cases, a notice will be given in the installation instructions. Do not attempt to tamper with any carrier-provided equipment or connection har
Inhaltszusammenfassung zur Seite Nr. 9
Canadian Emission Requirements This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Warning per EN 55022 (CISPR-22) Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user will be required to take adequate measures. Cet apparei
Inhaltszusammenfassung zur Seite Nr. 10
Inhaltszusammenfassung zur Seite Nr. 11
Quick Start Guide If you are familiar with FCD-IPM, use this guide to prepare it for operation. 1. Installing and Operating FCD-IPM To install FCD-IPM: 1. Unpack the unit. 2. If working with E1 unbalanced interface, open the unit to switch factory setting of jumper from BAL to UNBAL. 3. Close the unit. 4. Connect interface cables to the unit. 5. Connect the power to the unit. 6. Turn on the unit. 7. Configure the unit using the Quick Setup Menu or Advanced Menu. Installing and
Inhaltszusammenfassung zur Seite Nr. 12
Quick Start Guide FCD-IPM Installation and Operation Manual 2 Installing and Operating FCD-IPM
Inhaltszusammenfassung zur Seite Nr. 13
Contents Chapter 1. Introduction 1.1 Overview .......................................................................................................... 1-1 Versions...................................................................................................................1-1 Applications.............................................................................................................1-3 Features...........................................................................
Inhaltszusammenfassung zur Seite Nr. 14
Table of Contents Chapter 4. Configuration 4.1 Overview .......................................................................................................... 4-1 4.2 Main Menu....................................................................................................... 4-2 4.3 Quick Setup Menu............................................................................................ 4-2 Quick Setup Parameters...................................................................
Inhaltszusammenfassung zur Seite Nr. 15
Table of Contents 5.4 Access Control (Security) Menu....................................................................... 5-75 External Access Security (only relevant to Link with PPP Protocol)...........................5-76 Device Security Identity (PPP only).........................................................................5-78 Security Host/Guest (PPP only)...............................................................................5-79 Login Script Setup......................
Inhaltszusammenfassung zur Seite Nr. 16
Table of Contents List of Figures 1-1. FCD-IPM with PBX and LAN ..................................................................................... 1-3 1-2. FCD-IPM with Eight Telephones and LAN over SHDSL.............................................. 1-3 1-3. FCD-IPM General View............................................................................................. 1-5 1-4. FCD-IPM Functional Block Diagram ........................................................................
Inhaltszusammenfassung zur Seite Nr. 17
Table of Contents 4-37. OSPF Neighbors Table .......................................................................................... 4-34 4-38. OSPF Database Table............................................................................................ 4-34 4-39. LAN Statistics......................................................................................................... 4-35 4-40. SHDSL Status .............................................................................
Inhaltszusammenfassung zur Seite Nr. 18
Table of Contents 5-36. Local Loopback ..................................................................................................... 5-34 5-37. Remote Loopback ................................................................................................. 5-34 5-38. FCD-IPM with an E1/T1 Interface.......................................................................... 5-35 5-39. FCD-IPM with an E1/T1 Interface and Sublink.......................................................
Inhaltszusammenfassung zur Seite Nr. 19
Table of Contents 5-85. Filters Menu .......................................................................................................... 5-83 5-86. Action of a Quick Filter ......................................................................................... 5-84 5-87. Action of an Advanced Filter ................................................................................. 5-85 5-88. Filters Menu ...........................................................................
Inhaltszusammenfassung zur Seite Nr. 20
Table of Contents 5-15. SHDSL Parameters ................................................................................................ 5-32 5-16. SHDSL Loops ........................................................................................................ 5-33 5-17. T1 Setup Parameters ............................................................................................. 5-37 5-18. T1 Parameters Link1 Parameters............................................................
