Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents 1. Overview ....................................................................................................1 1.1 Product Feature..........................................................................................1 1.2 System Requirements ...............................................................................1 2. Getting Start...............................................................................................2 2.1 Know the 108Mbps Wireless Network Acces
Inhaltszusammenfassung zur Seite Nr. 3
1. Overview 1.1 Product Feature ● Compliance with IEEE 802.11g and 802.11b standards ● Highly efficient design mechanism to provide unbeatable performance ● Achieving data rate up to 54Mbps for 802.11g and 11Mps for 802.11b with wide range coverage; high performance to deliver up to 108Mbps raw data rate for 802.11g ● Strong network security with WEP and 802.1X encryption ● Quick and easy setup with Web-based management utility. 1.2 System Requirements ● Windows 98, 98SE, Millenniu
Inhaltszusammenfassung zur Seite Nr. 4
2. Getting Start 2.1 Know the 108Mbps Wireless Network Access Point Ports: ● Power Receptor ● Reset Button ● RJ-45 Ethernet Port LEDs: ● Power LED: ON when the unit is powered up ● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity ● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless activity. 2.2 Connect to the 108Mbps Wireless Network Access Point Build the Infrastructure Mode 2
Inhaltszusammenfassung zur Seite Nr. 5
In order to setup an Infrastructure of a wireless network such as the example shown above, you will need the following: 1. A broadband Internet connection. 2. ADSL or Cable modem provided by your ISP as part of the broadband connection installation. 3. A Router that connects to the ADSL/Cable modem for Internet connection sharing. 4. An Access Point to connect with the Router to form a wireless infrastructure network. 5. Wireless clients equipped with wireless networking devices suc
Inhaltszusammenfassung zur Seite Nr. 6
The below window will popup. Please enter the user name and password. Both of the default is “admin”. Now, the main screen appears. 4
Inhaltszusammenfassung zur Seite Nr. 7
2.3.2 Setup with Wizard Setup wizard is provided as the part of the web configuration utility. You can simply follow the step-by-step process to get your Access Point configuration ready to run in 4 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue. 5
Inhaltszusammenfassung zur Seite Nr. 8
Step 1: Set Password You can change the password as you like and then click “Next” to continue. Step2: Set WLAN Connection Please type the name of SSID you like and select the channel. Then, click “Next” to continue. 6
Inhaltszusammenfassung zur Seite Nr. 9
Step 3: Set WEP Encryption If you like to enable WEP, please click “Enabled”. Then, select the key size of WEP encryption and enter the key value in the key text box. Please click “Next” to continue. Step 4: Restart The Setup wizard is now completed. The new settings will be effective after the Access Point restarted. Please click “Restart” to reboot the Access Point. If you do not want to make any changes, please click “exit” to quit without any changes. You also can go back to
Inhaltszusammenfassung zur Seite Nr. 10
3. Configuration through WEB Browser 3.1 Status This page as below shows you the following information. Firmware Version: Shows the current firmware version. LAN: Shows the Mac address, IP address (default: 192.168.1.1), Subnet Mask, Gateway Address. The current LAN traffic calculated in terms of number of packets sent and received by AP through wired connection is also displayed. Wireless: Shows the Mac address, current ESSID, the status of Encryption Function (Enable or Disable), t
Inhaltszusammenfassung zur Seite Nr. 11
You may clear the entries recorded in the log by clicking the “Clear Log” button, and refresh the screen to show the latest log entries by clicking the “Refresh” button. 3.2 Basic Setting This is the page allow you to change the access point. 9
Inhaltszusammenfassung zur Seite Nr. 12
AP Name: The name of the AP, which can be used to identify the Access Point among the all the Access Points in the wireless network. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. The SSID must be identical for each clients and nodes in the wireless network. Channel: The channel that AP will operate in. You can select the channel range of 1 to 11 for North America (FCC) domain, 1 to 13 for European (ETSI) domain and 1 to 14 f
Inhaltszusammenfassung zur Seite Nr. 13
1. Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to use. Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius server. 2. Enter the IP address, the Port and the Shared Secret used by the Primary Radius Server. 3. Enter the IP address, the Port and the Shared Secret used by the Secondary Radius Server. 4. Click “Apply” button to take
Inhaltszusammenfassung zur Seite Nr. 14
WPA-PSK, users need to set the key in the passphrase field as the below screen. The key length should be 8 characters at least. 12
Inhaltszusammenfassung zur Seite Nr. 15
3.3 IP Setting This page allows you to configure the IP and DHCP settings of the Access Point. The default IP address of this access point is 192.168.1.1 with the subnet mask of 255.255.255.0. You can type in other values for IP Address, Subnet Mask and Gateway and click “Apply” button for the changes to be effective. You can also set the Access Point to obtain the IP from a DHCP server, but it is not recommended. Select the option “Obtain IP Automatically” and click “Apply” button fo
Inhaltszusammenfassung zur Seite Nr. 16
3.4 Advanced Setting This page contains configurations for advanced users, which the change reflects the wireless performance and operating modes. AP Mode: Select one of the AP operating modes for different application of Access Point. 1. AP – The normal Access Point operating mode which forms a wireless ESS network with its wireless clients. 2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a single computer station to join a wireless ESS network through it.
Inhaltszusammenfassung zur Seite Nr. 17
Remote Bridge MAC filed: key in the LAN Mac address (NOT wireless Mac address) of the AP that you wish to get connected. 4. Multiple Bridge – A group of APs which consists of two or more APs operating under Multiple Bridge mode, that can connect two or more Ethernet networks or Ethernet enabled clients together. 5. Repeat Mode: It is able to extend the effective range and coverage of the wireless network. Please make sure the SSID is the same as that AP you want to extend. Note: All APs
Inhaltszusammenfassung zur Seite Nr. 18
11g mode only: User can use 11g only when he selects “enable”. Super G mode: Super G mode is disabled by selecting “Disable” from the drop list. If you like to use Super G to enhance the speed, there are three options on Super G mode: Super G without turbo; Super G with Dynamic turbo and Super G with Static turbo. Turbo mode indicates the combination of two channels to enhance the throughput. Super G without turbo indicates that it is on Super G mode without the channel’s combination.
Inhaltszusammenfassung zur Seite Nr. 19
Password: Allow you to change the new login password. Here are the necessary steps: 1. Enter the new password in the “AP Password New:” field. 2. Enter the new password again in the “Confirm” field. 3. Click “Apply” MAC Filter: MAC Filter function controls the MAC of the network devices that are listed in this table for access authorization or denial. When MAC Filter is enabled, by selecting the “Enabled” radio box, select one of two choices: ●Only deny PCs with MAC listed below to acc
Inhaltszusammenfassung zur Seite Nr. 20
Backup Settings: Click on “Backup” button, which will open a FileSave Dialog box, where you get to save all the current settings and configurations to a file. Restore Settings: Click on the “Browse” button to open a FileOpen Dialog box, where you get to select the file, which you save previous settings and configurations. Upon selecting the saved file, click “Restore” and complete the restore process when the access point re-operates after it restarts. Restore to default settings: Click o
