Inhaltszusammenfassung zur Seite Nr. 1
ELECTRONIC CASH REGISTER
-
CE T100
CI
USER'S MANUAL
THANK YOU
YOUR RECEIPT
CALL AGAIN !
GROCERY
DAIRY
H.B.A.
FROZEN
FOOD
DELICATESSEN
Inhaltszusammenfassung zur Seite Nr. 2
Safety Precautions • To use this product safely and correctly, read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future reference. • Always observe the warnings and cautions indicated on the product. About the icons In this guide various icons are used to highlight safe operation of this product and to prevent injury to the operator and other personnel and also to prevent damage to property
Inhaltszusammenfassung zur Seite Nr. 3
Warning! Never try to take the register apart or modify it in any way. High-voltage components inside the register create the danger of fire and electric shock. • Contact CASIO service representative for all repair and maintenance. Power plug and AC outlet Use only a proper AC electric outlet (100V~240V) . Use of an outlet with a different voltage from the rating creates the danger of malfunction, fire, and electric shock. Overloading an electric outlet creates the danger of overheating and fir
Inhaltszusammenfassung zur Seite Nr. 4
Introduction & Contents Introduction & Contents ...................................................................................... 4 Getting Started ..................................................................................................... 7 Remove the cash register from its box. ............................................................................ 7 Remove the tape holding parts of the cash register in place. ........................................... 7 Install the three
Inhaltszusammenfassung zur Seite Nr. 5
Post-finalization receipt format, General printing control, Compulsory, Machine features .. 45 About post-finalization receipt......................................................................................... 45 Programming general printing control............................................................................. 46 Programming compulsory and clerk control function ...................................................... 47 Programming read/reset report printing control .........
Inhaltszusammenfassung zur Seite Nr. 6
User'sManual Introduction & Contents Unpacking the register Mode key (Operator/Program key) User's manual/ Drawer key Take-up reel Roll paper Memory backup batteries Welcome to the CASIO CE-T100! Congratulations upon your selection of a CASIO Elec- tronic Cash Register, which is designed to provide years of reliable operation. Operation of a CASIO cash register is simple enough to be mastered without special training. Everything you need to know is included in this manual, so keep it on h
Inhaltszusammenfassung zur Seite Nr. 7
User'sManual Getting Started This section outlines how to unpack the cash register and get it ready to operate. You should read this part of the manual even if you have used a cash register before. The following is the basic set up procedure, along with page references where you should look for more details. Remove the cash register from its box. 1. Make sure that all of the parts and accessories are included. Remove the tape holding parts of 2. the cash register in place. Also remove the small
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started Install the three memory backup batteries. (continued…) 3. 3. Note the (+) and (–) markings in the battery compartment. Load a set of three new SUM- 3 (UM-3) batteries so that their positive (+) and negative (–) ends are facing as indicated by the markings. 4. Replace the battery compartment cover. 5. Close the platen arm and replace the printer cover. Important! These batteries protect information stored in your cash register's memory when there is a power failure or when you un
Inhaltszusammenfassung zur Seite Nr. 9
Install receipt/journal paper. 4. Platen arm Platen Printer Important! Take away the head protection sheet from the printer and close the platen arm. Caution! (in handling the thermal paper) • Never touch the printer head and the platen. • Unpack the thermal paper just before your use. • Avoid heat/direct sunlight. • Avoid dusty and humid places for storage. • Do not scratch the paper. • Do not keep the printed paper under the following circumstances: High humidity and temperature/direct sunligh
Inhaltszusammenfassung zur Seite Nr. 10
Getting Started To install journal paper Step 1 Remove the printer cover. Step 7 Step 2 Slide the leading end of Open the platen arm. the paper into the groove on the spindle of the take- up reel and wind it onto the reel two or three turns. Step 3 Step 8 Ensuring the paper is being Replace the paper guide of fed from the bottom of the the take-up reel. roll, lower the roll into the space behind the printer. Step 9 Step 4 Place the take-up reel into Put the leading end of the place behind the pr
Inhaltszusammenfassung zur Seite Nr. 11
5. Plug the cash register into a wall outlet. Be sure to check the sticker (rating plate) on the side of the cash register to make sure that its voltage matches that of the power supply in your area. 6. Insert the mode key marked “PGM” into the mode switch. PGM OP CAL C-A32 C-A02 REG OFF RF PGM Turn the mode key to the “REG” position. 7. The display should change to the following. CAL X REG Z OFF RF PGM 11 E Getting Started
Inhaltszusammenfassung zur Seite Nr. 12
PGM PGM PGM C-A32 C-A32 C-A32 Getting Started Set the date. 8. CAL X REG Z 6 1s 6 :: :: :: 6 x 6 C OFF Year Month Day RF Current date PGM Example: June 15, 2002 2 020615 Mode Switch 9. Set the time. CAL X REG Z 6 1s 6 :::: 6 x 6 C OFF Current time RF Example: PGM 08:20 AM20820
09:45 PM22145 Mode Switch Select printouts receipt or journal. 10. CAL X Issue receipt =0 REG 6 1s 6 6 h 6 s Z { } Print journal =1 OFF RF PGM Mode Switch Note ! If you need journal and are sometimes required receipt
Inhaltszusammenfassung zur Seite Nr. 13
11. Tax table programming Programming automatic tax calculation Important! After you program the tax calculations, you also have to individually specify which departments (page 27) and PLUs (page 29) are to be taxed. For this cash register to be able to automatically register state sales tax, you must program its tax tables with tax calculation data from the tax table for your state. There are three tax tables (U. S.) and four tax tables (Canada) that you can program for automatic calculation o
Inhaltszusammenfassung zur Seite Nr. 14
PGM C-A32 PGM C-A32 Getting Started 11. Tax table programming (continued) Programming for Canadian tax tables procedure State sales tax calculation data tables for all of the states that make up all Canadian provinces are included on this page. This data is current as of October 30, 1994. Simply find your province in the tax tables and input the data shown in its table. Programming tax table Example 1: Federal tax 7% (Add-on/round-off) Example 2: Ontario 10 % (Tax-on-tax/Round-off) CAL X CAL X O
Inhaltszusammenfassung zur Seite Nr. 15
* * * * * * * NOVA ONTARIO QUEBEC NEW ONTARIO BRITISH MANITOBA/ ONTARIO N.B. & QUEBEC SCOTIA FOUNDLAND COLUMBIA SASKATCHEWAN P.E.I 10% 10% 10% 12% 12% 6% 6% 7% 8% 9% CANADIAN TAX TABLES 10 10 10 12 0 0 6 7 0 9 5004 5004 5004 5004 1 1 5002 5002 1 9002 4 2 3 * Must be programmed into Tax 25 14 25 25 24 25 table 2 ~ 4. 25 41 31 29 58 43 37 74 56 45 54 Important! Be sure you use the federal sales tax data with your provincial sales tax data. Even if your province use the same tax rate as another pro
Inhaltszusammenfassung zur Seite Nr. 16
Introducing CE-T100 General guide This part of the manual introduces you to the cash register and provides a general explanation of its various parts. display drawer keyboard pop-up display printer cover take-up reel main operator customer Take-up reel Pop-up display (customer display) Roll paper Main display Printer Mode switch Keyboard Multipurpose tray Drawer Drawer lock Printer cover Roll paper Drawer You can use the roll paper to print receipts and a The drawer opens automaticall
Inhaltszusammenfassung zur Seite Nr. 17
X CAL Z REG Mode switch Use the mode keys to change the position of the mode OFF switch and select the mode you want to use. RF PGM Mode Switch Mode Name Description Z RESET Reads sales data in memory and clears the data. X READ Reads sales data in memory without clearing the data. CAL CALCULATOR Use this mode for calculator. REG REGISTER Use this mode for normal registration. OFF STAND-BY Cash register standing by. RF REFUND Use this mode to register refund transaction. PGM PROGRAM Use this mod
Inhaltszusammenfassung zur Seite Nr. 18
Introducing CE-T100 Lock/unlock the multipurpose tray Unlock Lock (Red) (Green) When the cash drawer does not open! In case of power failure or the machine is in malfunction, the cash drawer does not open automatically. Even in these cases, you can open the cash drawer by pulling drawer release lever (see below). Important! The drawer will not open, if it is locked with a drawer lock key. E 18
Inhaltszusammenfassung zur Seite Nr. 19
Displays Main Display Pop-up (customer) display (alphanumeric + numeric display) (numeric display) Item registration (by department/PLU) alphanumeric display AMOUNT !50 !50 RPT RECEIPT TOTAL CHANGE ON 5 2 1 1 Repeat registration AMOUNT 3 "50 3 "50 RPT RECEIPT TOTAL CHANGE ON 3 1 3 2 1 Totalize operation AMOUNT _ 1"34 _ 1"34 RPT RECEIPT TOTAL CHANGE ON 5 2 1 5 4 1 Amount/Quantity Note that only one digit is displayed for the number This part of the display shows monetary amounts. of repeats
Inhaltszusammenfassung zur Seite Nr. 20
Introducing CE-T100 Keyboard D E G 54/78 60/84 66/90 72/96 DEPT 30 36 42 48 HELP SHIFT 612 18 24 I J 53/77 59/83 65/89 71/95 RC PD 29 35 41 47 511 17 23 T/S1 T/S2 C Q 1 2 3 K L OPEN 52/76 58/82 64/88 70/94 RECEIPT 28 34 40 46 FEED CH CHK ON/OFF CLK# 78 9 410 16 22 4 5 6 M N 51/75 57/81 63/87 69/93 PLU/ MD # 27 33 39 45 PRICE % S.DEPT 45 6 3 9 15 21 ST NS 7 8 9 O 50/74 56/80 62/86 68/92 X/FOR 26 32 38 44 — DATE SUBTOTAL RF 12 3 TIME 2 8 14 20 0 A B P POST 49/73 55/79 61/85 67/91 ERR.CORR CA AMT R
