Inhaltszusammenfassung zur Seite Nr. 1
Panasonic Broadcast
BT-LH2550
Menu Information
Inhaltszusammenfassung zur Seite Nr. 2
How to Use the On Screen Menu The screen displays eight types of information: input signal status, picture/volume adjusting menu status, sharpness display, FUNCTION display, audio level meter display, menu display, TIME CODE display and CLOSED CAPTION display. Input signal status 1. Main window , sub-window indication � Indicates whether the main window or sub-window is displayed. � In split screen display, the screen synchronized to the reference sync changes with the input signal format a
Inhaltszusammenfassung zur Seite Nr. 3
How to Use the On Screen Menu (continued) FUNCTION display � Use the menu to open and set up functions. � When “FUNCTION DISPLAY” ( page 32) is set to ON, press any of the "FUNCTION1" to "FUNCTION5" buttons to display the functions assigned to F1:MARKER FUNCTION buttons. F2:WFM/VECTOR � This display disappears after 2 seconds of inaction. F3:TWO WINDOW � “XXXXX” indicates operating status ( page 34, F4:TIME CODE “Functions displayed during FUNCTION button F5:LEVEL METER operation”). XXXXX Audio
Inhaltszusammenfassung zur Seite Nr. 4
How to Use the On Screen Menu (continued) TIME CODE display (TC) � Use the menu to display and set the time code for HD-SDI signal input. It also allows you to switch display mode (VITC, LTC, VUB, LUB). In VITC and LTC display mode: � Displays the time code in hours: minutes: seconds: or frames. � In drop-frame mode, a different delimiter between seconds and frames is used. Note: Read errors are displayed as “--:--:--:--” ( : ) NDF ( . ) DF In VUB and LUB display modes: � BG8, BG7, BG6, BG5, B
Inhaltszusammenfassung zur Seite Nr. 5
How to Use the On Screen Menu (continued) Menu operations 1. Press [MENU] to display the MAIN menu. 3. Press [ , ] to select a sub menu and press [ENTER]. The settings in the sub menu change to green. 2.Press [ , ] to select a menu and push [ENTER]. [MAIN MENU] 4. Press [ , ] to select a setting, then press [ENTER]. To cancel, press [MENU]. To return to the previous screen Press the [MENU] button. 18
Inhaltszusammenfassung zur Seite Nr. 6
How to Use the On Screen Menu (continued) Picture/volume adjusting menu operations 1. Press [ADJUST] to display the picture/volume adjusting menu. 2. Press [ , ] to select item to adjust. The selected item changes to white. 3. Press [ , ] to adjust. PHASE 0-60 (30) CHROMA 0, 10-60 (30) BRIGHT 0-60 (30) B.LIGHT [BACKLIGHT] 0-60 (50) VOLUME 0-60 (0) ( ) : Factory defaults � Setting [B.LIGHT/CONT.] to CONT. [CONTRAST] in the [SYSTEM CONFIG] menu changes the B.LIGHT indication to CONT. enabling C
Inhaltszusammenfassung zur Seite Nr. 7
User Data You can save and load up to five combinations of menu settings and picture/volume adjustments as user data. You can also return settings and adjustments to their factory defaults. User data include the following settings. � Menu settings except “SETUP LOAD/SAVE” and “CONTROL/CONTROL” (including button function settings on the monitor front panel) � Screen adjustments made in the picture/volume adjustments menu Saving user data Loading user data 1. Press [MENU] to display the MAIN menu
Inhaltszusammenfassung zur Seite Nr. 8
Main Menu Menu configuration MAIN MENU MARKER MARKER 16:9 VIDEO CONFIG GAMMA SELECT 4:3 COLOR SPACE B.LIGHT/CONT. BACK SMPTE-C SYSTEM CONFIG COLOR TEMP. BACKLIGHT CENTER EBU SHARPNESS MODE MENU POSITION GPI PRESET1 ITU-709 SHARPNESS H STATUS DISPLAY GPI PRESET2 WIDE1 SHARPNESS V SETUP LOAD MARKER TYPE WIDE2 I-P MODE SETUP SAVE CROSS HATCH WIDE3 MONO POWER ON SETUP USER0-63 ANAMO COLOR SPACE D93 SD ASPECT POWER SAVE MODE D65 SCAN CALIBRATION D56 COLOR GAIN R FUNCTION1 VAR1 COLOR TEMP. FUNCTION C
Inhaltszusammenfassung zur Seite Nr. 9
Main Menu (continued) MARKER This function is not available in split screen display of the TWO WINDOW function. (CROSS HATCH is not affected.) Underlined values indicate factory defaults. Sub menu Setting Description *1 MARKER OFF Turns the MARKER setting on and off. ON *2*3*4 OFF Selects/displays the 16:9 marker type. 16:9 4:3 No marker display 13:9 <4:3> 4:3 marker <13:9> 13:9 marker 14:9 <14:9> 14:9 marker CNSCO marker CNSCO VISTA marker <95%> 95% area marker VISTA <90
Inhaltszusammenfassung zur Seite Nr. 10
Main Menu (continued) Sub menu Setting Description *5 GPI PRESET1 4:3 GPI PRESET1: Selects the marker displayed by the GPI terminal 13:9 “MARKER1 ON/OFF” ( page 48) operation. 14:9 GPI PRESET2: Selects the marker displayed by the GPI terminal CNSCO “MARKER2 ON/OFF” ( page 48) operation. VISTA <4:3> 4:3 marker 95% (16:9) <13:9> 13:9 marker *5 GPI PRESET2 93% (16:9) <14:9> 14:9 marker 90% (16:9) CNSCO marker 88% (16:9) VISTA marker 80% (16:9) <95% (16:9)> 95% area marker for 16
Inhaltszusammenfassung zur Seite Nr. 11
Main Menu (continued) Marker types ■ 16:9 marker ■ 4:3 marker (Displayed for SD input in 4:3 aspect ratio mode) (Displayed for HD input and SD input in 16:9 ratio This marker is displayed as a dotted line. mode.) This marker is only displayed as a vertical bar. The section becomes the “MARKER BACK”. 95% Area marker 93% Area marker 4:3 marker 13:9 marker 90% Area marker 88% Area marker 14:9 marker VISTA marker, CNSCO marker This marker is displayed as a horizontal dotted line. 80% Area mark
Inhaltszusammenfassung zur Seite Nr. 12
Main Menu (continued) ■ “CROSS HATCH” The “CROSS HATCH” function enables display of markers at regular vertical and horizontal intervals to facilitate composition and other tasks. The width of marker lines is 1 dot, the markers consist of 1 line, and are spaced 120 dots apart (fixed value). Each press of the button (“FUNCTION1” to “FUNCTION5”) to which the “CROSS HATCH” has been assigned turns the function on and off. Each press of the FUNCTION button to which the “CROSS HATCH” function is assi
Inhaltszusammenfassung zur Seite Nr. 13
Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu Settings Description GAMMA Selects gamma curve. The gamma curve in the sub-window can be STANDARD *1*2 set in the split-screen display and sub-window display (single screen) SELECT STDIO/PST of the “TWO WINDOW” function. FILM Standard mode Color emphasis mode (a mode that approximates CRT display capability suitable for studio or postproduction application) Film mode (For VA
Inhaltszusammenfassung zur Seite Nr. 14
Main Menu (continued) Sub menu Settings Description *2*6 MODE2 Selects IP conversion mode. ( page 27, “IP mode”) Both the main I-P MODE MODE1 window and sub-window can be set up in the split-screen display of the “TWO WINDOW” function. Inter-field interpolation Inter-frame interpolation *2 OFF Switches between color and monochrome (MONO). MONO ON Color Monochrome � When ON, the CHROMA setting of the picture/volume adjusting menu is fixed at 0. *2*8 ANAMO OFF With a
Inhaltszusammenfassung zur Seite Nr. 15
Main Menu (continued) ■ WB adjustment mode Select “VAR1” to “VAR3” for “COLOR TEMP.” in the “VIDEO CONFIG” menu to make “WHITE BALANCE VAR1” to “WHITE BALANCE VAR3” (WB) adjustments. Underlined values indicate factory defaults. Sub menu Settings Description *1 COLOR TEMP. USER0 - 6 Selects the color temperature that will become the basis D93 for adjustment. D65 Adjustable settings 0 - 63 (equivalent to a D56 color temperature range of 3,000 - 9,300K) Equivalent to a color
Inhaltszusammenfassung zur Seite Nr. 16
Main Menu (continued) SYSTEM CONFIG Underlined values indicate factory defaults. Sub menu Settings Description B.LIGHT/CONT. BACKLIGHT Selects function to be assigned to BACKLIGHT/CONT. in the picture/ CONTRAST volume adjusting menu. Adjusts the BACKLIGHT. Adjusts the CONTRAST. BACKLIGHT 0 - 50 Adjusts the backlight when the B.LIGHT/CONT. submenu is set to CONTRAST. MENU CENTER Positions the on-screen menu. POSITION LB Center of the screen RB Left Botto
Inhaltszusammenfassung zur Seite Nr. 17
Main Menu (continued) ■ CALIBRATION The CALIBRATION function in this unit measures LCD panel characteristics from low to high brightness values and internal monitor processing handles CALIBRATION. CALIBRATION does not rely on image quality settings since internal signals are used for a calibration. CALIBRATION in this unit is made at D65 color temperature and calibrations for other color temperatures are results calculated from this value. ■ Equipment required for calibration � Konica Minolta C
Inhaltszusammenfassung zur Seite Nr. 18
Main Menu (continued) ■ CALIBRATION Select CALIBRATION in the “SYSTEM CONFIG” menu to open the following menus. Sub menu Setting Description AUTO Connect a CA-210 color analyzer and use this submenu to make a 1 CALIBRATION* calibration. Select “AUTO CALIBRATION” and select “YES” in the confirmation screen that appears to start calibration. 2 RESET* Returns calibration data to their factory defaults. Select “RESET” and select “YES” in the confirmation screen that appears to return calibrate
Inhaltszusammenfassung zur Seite Nr. 19
Main Menu (continued) FUNCTION Underlined values indicate factory defaults. Sub menu Settings Description FUNCTION 1 - Selects functions to be assigned to [FUNCTION1] - [FUNCTION5] HV DELAY FUNCTION 5 (front panel buttons). AUTOSETUP BLUE ONLY Displays synchronizing signals (horizontal, vertical). GAMMA SELECT The display changes in the following order. COLOR SPACE DELAY OFF H DELAY V DELAY HV DELAY DELAY OFF SD ASPECT SCAN Performs auto setup for PC display. TWO WINDO
Inhaltszusammenfassung zur Seite Nr. 20
Main Menu (continued) ■ FUNCTION setting restrictions Settings are not available under the following conditions. Setting Conditions that disable operation HV DELAY In TWO WINDOW and WFM mode, “INVALID FUNCTION” appears to indicate that operation is disabled. When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under “DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that operation is disabled. AUTO SETUP When something other than “RGB-COMP.” is s
