Bedienungsanleitung JBL LS360C

Inhaltszusammenfassung zur Seite Nr. 1

StudioLS360Com.qxd 7/25/07 4:18 PM Page 1
™
STUDIO SERIES
LS360C
OWNER’S GUIDE

Inhaltszusammenfassung zur Seite Nr. 2

StudioLS360Com.qxd 7/25/07 4:18 PM Page 2 THANK YOU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. Left Front Center Channel Right Front The LS360C has been specifically designed to deliver unsurpassed home theater Channel (above TV) Channel JBL Subwoofer sound reproduction from an in-ceiling speaker that does not intrude on your (optiona

Inhaltszusammenfassung zur Seite Nr. 3

StudioLS360Com.qxd 7/25/07 4:18 PM Page 3 PLACEMENT SPEAKER CONNECTIONS NOTE: In all applications, the tweeter and dual midrange drivers should be CONNECTION TIPS aimed toward the listening area. STEREO Before deciding where to place your speakers, survey your room and think about placement, keeping the following points in mind, and using Figure 1, on previous page, as a guide: • For best results, place the speakers 6'–8' apart. • Refer to “Home Theater” below if you also plan to use the s

Inhaltszusammenfassung zur Seite Nr. 4

Ceiling Joist Ceiling Joist StudioLS360Com.qxd 7/25/07 4:18 PM Page 4 EXISTING CONSTRUCTION Template 1. Remove the plastic paint 2. Determine the correct 3. NOTE: Always allow at 4. Ensure that the drywall or plywood shield from the speaker frame. speaker location. least a 1/2 inch between board or other appropriate wallboard NOTE: Use the included a ceiling stud/joist and the is at least a 1/2-inch thick, and confirm template when cutting the speaker cutout, or the that the board material is

Inhaltszusammenfassung zur Seite Nr. 5

StudioLS360Com.qxd 7/25/07 4:18 PM Page 5 NEW CONSTRUCTION If you wish to preinstall a rough-in frame before the drywall is installed, you will need to purchase the RIF10C rough-in-frame. Detailed installation instructions are supplied with the rough-in kit. PAINTING THE SPEAKER FRAME AND GRILLE The LS360C in-ceiling loudspeaker can be painted to match any décor. If you wish to change the color, the satin finish on the grille and frame will function as a primer coat. Before painting, instal

Inhaltszusammenfassung zur Seite Nr. 6

StudioLS360Com.qxd 7/25/07 4:18 PM Page 6 SPECIFICATIONS LS360C + Frequency Range ( 3dB) 80Hz – 20kHz – Recommended 10 – 200 Watts Amplifier Power Range Sensitivity 85dB @ (2.83V 1 meter) Nominal Impedance 8 Ohms Crossover Frequency 700Hz, 2,000Hz; 24dB/octave Low-Frequency Driver 7-3/4" x 3-3/8" (197mm x 85mm) ™ Radiator Plus Midrange Drivers Dual 3" (75mm) High-Frequency Driver 1" (25mm) Pure titanium External Diameter Diameter: 12-3/4" (W x H) (323mm) Mounting Cutout Diameter Diameter: 11

Inhaltszusammenfassung zur Seite Nr. 7

StudioLS360Com.qxd 7/25/07 4:18 PM Page 7 NOTES 7

Inhaltszusammenfassung zur Seite Nr. 8

StudioLS360Com.qxd 7/25/07 4:18 PM Page 8 Declaration of Conformity We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du Loir France declare in own responsibility that the product described in this owner’s manual is in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Laurent Rault Harman Consumer Group, Inc. Château du Loir, France 7/07 Features, specifications and appearance are subject to change without notice. JBL is a trademark of Harman Internation