Inhaltszusammenfassung zur Seite Nr. 2
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. Use only GENUINE brother supplies DO NOT refill the ink cartridges. Attempting to use refilled cartridges or the use of i
Inhaltszusammenfassung zur Seite Nr. 3
Using This Manual Thank you for purchasing a Brother multifunction centre (MFC). This MFC has been designed to be simple to use, with LCD screen prompts to guide you through functions. Please refer to the manual for explanation of advanced features. Additionally, the machine has a Reports key. Press Reports and 1 to print a help list of basic operational steps and functions. Finding Information All chapter headings and subheadings are listed in the Table of Contents. You will also be able to
Inhaltszusammenfassung zur Seite Nr. 4
User-Friendly Programming We have designed your Multi-Function Centre with on-screen programming. User-friendly programming helps you take full advantage of all the functions the machine has to offer. (See Using This Manual, page i) Since your programming is done on the LCD, we have created step-by-step on-screen prompts to help you. All you need to do is to follow the prompts as they guide you through the function menu selections, programming options and settings. Additionally, you can prog
Inhaltszusammenfassung zur Seite Nr. 5
Quick Reference Guide For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed in the carton box. Sending Black & White Faxes Receiving Faxes Automatic Transmission Select Receive Mode 1 Press Menu/Set, 2, 1, 2. 1 Place the original face up in the Automatic Document Feeder, or face down on the glass 2 Press or to select FAX ONLY, platen. EXT.TEL/TAD or MANUAL mode, and press Menu/Set. 2 Enter the fax number using Speed Dial, Search or the dial pad. Storing
Inhaltszusammenfassung zur Seite Nr. 6
Search/Speed Dial Brother Global Web Site : http://www.brother.com 1 Place the original face up in the Automatic Frequently Asked Questions (FAQs) and Document Feeder, or face down on the glass Product Support : platen. http://solutions.brother.com 2 Press Search/Speed Dial, and then enter the first letter of the name you’re looking for. 3 Press or to search the memory. 4 Press Mono Fax Start, when the LCD shows the name you want to call. Making Copi
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Using This Manual User-Friendly Programming Quick Reference Guide ......................................................................iii Table of Contents ................................................................................ v PREPARATION AND SIMPLE USER GUIDE Preparation and Simple User Guide Advice for Preparation and Simple User Guide.................................. 5 Control Panel Overview .....................................................................
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 8 Telephone Service Telephone Service for Australia ........................................................41 Telephone Service for New Zealand..................................................42 Telephone Service for Some Countries .............................................44 Chapter 9 Polling Polling Receive ..................................................................................45 Polling Transmit (Not Available for Colour Fax)..............................47 Chapter 10
Inhaltszusammenfassung zur Seite Nr. 9
® Chapter 14 Using the Windows -Based Brother MFL-Pro Control Centre Brother MFL-Pro Control Centre...................................................... 79 Using the Colour Scan Key ............................................................... 80 Brother Control Centre Features ....................................................... 82 Scan to File ........................................................................................ 85 Scan to E-mail ......................................
Inhaltszusammenfassung zur Seite Nr. 10
IMPORTANT INFORMATION Chapter 20 Important Safety Information Important Information for Australia ................................................146 Important Information for New Zealand..........................................147 Important Information for Some Countries .....................................150 APPENDIX Chapter 21 Specifications Fax Specifications............................................................................152 Printer Specifications..............................
Inhaltszusammenfassung zur Seite Nr. 11
ix
Inhaltszusammenfassung zur Seite Nr. 12
Preparation and Simple User Guide Steps to prepare and use the machine simply Follow the steps below to prepare and use the machine simply. However, before you perform these steps, see Important Safety Information (page 146), and Advice for Preparation and Simple User Guide (page 5). If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE. 1 Read the Quick Setup Guide Follow the instructions on the Brother Quick Setup Guide to set up the machine. 2 Setting the Document You c
Inhaltszusammenfassung zur Seite Nr. 13
PREPARATION AND SIMPLE USE 3 Fan the pages and tap them on the desk so they are even. Insert documents face up, top edge first in the Automatic Document Feeder until they lightly touch the feed roller. 4 Adjust the paper guides to fit the width Documents are Face Up of your pages. in the ADF 30˚ Setting the Special Media Lever You can use the special media lever to select the Regular Position ( ) or Special Position ( ). To feed regular types of documents, move the special media lever to th
Inhaltszusammenfassung zur Seite Nr. 14
Using the Glass Platen You can use the glass platen to fax one page at a time or pages of a book. Documents can be A4 or letter size (21.6 cm to 29.6 cm). To use the glass platen, the Automatic Document Feeder must be empty. Documents are Face Down on the Glass Platen 1 Lift the document cover. 2 Using the document guidelines on the left, centre the document FACE DOWN on the glass platen. 3 Close the document cover. If the document is a book or is thick, do not slam the cover or press on it,
Inhaltszusammenfassung zur Seite Nr. 15
PREPARATION AND SIMPLE USE 4 Faxing from the Glass Platen 1 Place the document face down on the glass platen. 2 Dial the fax number, then press Mono Fax Start. The machine starts scanning the first page. 3 To send a single page, go to Step 5—OR—To send MEMORY #001 99% multiple pages, go to Step 4. NEXT:PRESS SET DIAL:PRESS START 4 Place the next page on the glass platen and press Menu/Set. The machine starts scanning. (Repeat Step 4 for each additional page.) 5 Press Mono Fax Start to begin d
Inhaltszusammenfassung zur Seite Nr. 16
Advice for Preparation and Simple User Guide Choosing a Location Place the machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the machine near a telephone socket and a standard, earthed electrical socket. Choose a location where the temperature remains between 10°C and 35°C (50° – 95°F). Avoid placing the machine where it may be knocked. Do not place near heaters, air conditioners, water, chemicals or refrigerators. Do not expose the
Inhaltszusammenfassung zur Seite Nr. 17
PREPARATION AND SIMPLE USE Connecting the Power Cord • This machine must be fitted with an earthed plug. • Since the machine is earthed via the mains plug, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power to the machine on when you connect it to a telephone line. Similarly, you can protect yourself when you want to move the machine, by disconnecting the telephone line first, and then the power cord. If you need to remove
Inhaltszusammenfassung zur Seite Nr. 18
Connecting an External Telephone Answering Device (TAD) Sequence When you have an external TAD on the same telephone line as the machine, the TAD answers all calls. The machine “listens” for fax calling (CNG) tones. If it hears them, the machine takes over the call and receives the fax. If it does not hear the CNG tones, the machine will not take over the call, and messages can be left on the TAD by callers in the normal way. The TAD must answer within a maximum of four rings. However, we rec
Inhaltszusammenfassung zur Seite Nr. 19
PREPARATION AND SIMPLE USE Outgoing Message (OGM) of External TAD Timing is important in recording this message. The message sets up the ways to handle both manual and automatic fax reception. 1 We recommend the outgoing message (OGM) is no longer than 20 seconds. 2 Allow 5 seconds of silence at the beginning of your message. (This allows the fax to detect the calling tone prior to OGM, so reception can be faster.) 3 We recommend that you end your OGM by giving your Remote Activation Code for p
Inhaltszusammenfassung zur Seite Nr. 20
Control Panel Overview 2 3 4 1 5 6 7 8 9 10 11 12 Fax and Telephone Keys: Search/Speed Dial 1 3 Lets you dial stored phone numbers by Fax Resolution pressing # key and a two digit number. (For the Next Fax Only) Also lets you look up numbers stored in Sets the resolution when you send a fax. the dialling memory. Tel Start Keys: 4 This key is used to have a telephone conversation having picked up the Colour Fax Start external handset in F/T pseudo-ringing Starts sending a colour fax. etc. Mon
Inhaltszusammenfassung zur Seite Nr. 1
MFC-5100C
OWNER’S MANUAL
