Bedienungsanleitung Fujitsu FTP-608 Series

Inhaltszusammenfassung zur Seite Nr. 1

ba TTEry drivE, FTP-608 S eries
2” HiGH SPEEd THErMaL PrinTEr
FTP-628 MCL101#11/ #21
Easy Loading Method
n OvErviEw
The easy loading FTP-608 MCL Series is ultra compact high
speed, battery driven thermal printer, printing on 2-inch wide
paper (58mm) where platens are removable. Our original
platen removal mechanism improved paper loading and
maintenance.
The FTP-608 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket
issuing terminals, label p

Inhaltszusammenfassung zur Seite Nr. 2

FTP-628MCL101#11/ #21 n ParT nUME b rS Item Part Number FTP-628MCL101 #11 without platen open detect switch Printer mechanism FTP-628MCL101 #21 without platen open detect switch LSI for driving TBA Parallel TBA Interface Board Serial TBA Parallel TBA Interface Cables Serial TBA Power Head, motor, TBA cable logic n SPECiFiCaTiOnS Item Specifications Part number FTP-628MCL0  #    FTP-628MCL0  #2 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizo

Inhaltszusammenfassung zur Seite Nr. 3

FTP-628MCL101#11/ #21 n SPECiFiCaTiOnS Specification Item FTP-628MCL101#11 FTP-628MCL101#21 Interface Conforms to RS232C / Centronics 4.2 to 8.5VDC,average current 2.7 to 7.2 VDC, average current 2.4A (at 7.4 (3A)peak 1.9A (3.8A) peak For print head Printing ratio: 12.5%, printing Printing ratio: 12.5%, printing Operating speed 60mm/sec. at 7.2 V speed 40mm/sec. at 4.2 V Voltage For motor 4.2 to 8.5 VDC, 1 A max. 2.7 to 7.2 VDC, 1 A max. For logic 2.7 to 5.25 VDC, 0.1 A maximum External dimensi

Inhaltszusammenfassung zur Seite Nr. 4

F.T JAPAN FUJITSU FTP-628MCL101#11/ #21 n FUnCTiOn Item Item 1. Test print function 8. Mark detection function 2. Paper out detection 9. MCU operation abnormality detection 3. Paper near end detection 10. Power ON/OFF sequence protection Thermal head temperature abnormality 4. 11. Motor over-current protection detection 5. Blow-out fuse detection 12. Hardware timer 6. Head voltage abnormality detection 7. Motor power saving function n diMEnSiOnS 1. Printer mechanism: 2- inch FTP-628MCL101#11/#

Inhaltszusammenfassung zur Seite Nr. 5

FTP-628MCL101#11/ #21 n PrinTEr COnnECTOr (FLExibLE PT bOard) Pin arrayS FTP-628 MCL101#11 / #21 Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product No Signal I/O Contents 1 PHK — Cathode for photo interruptor 2 VSEN I paper sensor power 3 PHE O Emittor for photo interruptor 4 N.C. — No connection 5 N.C. — No connection 6 VH — Head drive power 7 VH — 8 DIN I Data in 9 CLK I Synchronous clock for communication 10 GND — Ground power supply for thermal head 11 GND

Inhaltszusammenfassung zur Seite Nr. 6

FTP-628MCL101#11/ #21 Fujitsu Components International Headquarter Offices Japan Europe Fujitsu Component Limited Fujitsu Components Europe B.V. Gotanda-Chuo Building Diamantlaan 25 3-5, Higashigotanda 2-chome, Shinagawa-ku 232 WV Hoofddorp  Tokyo 4, Japan  Netherlands Tel: (8-3) 5449-700 Tel: (3-23) 556090 Fax: (8-3) 5449-2626  Fax: (3-23) 5560950  Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com Web: www.fcl.fujitsu.com Web: http://www.fujitsu.com/emea/services/component