Inhaltszusammenfassung zur Seite Nr. 1
Wired / Wireless
USB2.0 MFP Print Server
FPS-1010M / FPS-1010MG
User’s Manual
Version: 2.0
(January, 2008)
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Copyright © 2008 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents h
Inhaltszusammenfassung zur Seite Nr. 3
telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipme
Inhaltszusammenfassung zur Seite Nr. 4
Contents 1. Introduction ............................................................................................................................. 1 2. Product Package..................................................................................................................... 1 3. MFP Server Installation in Windows 2000/XP/Vista ............................................................... 2 3.1 Hardware Installation............................................................
Inhaltszusammenfassung zur Seite Nr. 5
11.3 Setup MFP Server’s IP Address.......................................................................... 71 11.3.1 DHCP...........................................................................................................72 11.3.2 BOOTP ........................................................................................................72 11.4 Verify MFP Server’s IP Address .......................................................................... 73 11.5 Configure Remote LPD Pri
Inhaltszusammenfassung zur Seite Nr. 6
1. Introduction Thank you for purchasing and using our MFP print server. The FPS-1010M / FPS-1010MG allows your Multi-function printer (called for short: MFP) or printer to become a shared device on the network. Unlike many print servers, it can communicate with MFP and printer as if it is connected directly to your computer. Because of the features, all users can share print, scan, fax and card reader functions through the network. Furthermore, the FPS-1010M / FPS-1010MG can build the bi-
Inhaltszusammenfassung zur Seite Nr. 7
3. MFP Server Installation in Windows 2000/XP/Vista 3.1 Hardware Installation 1. Unpack the FPS-1010M / FPS-1010MG package and verify the items listed in the previous section are provided. 2. Use USB cable to connect FPS-1010M / FPS-1010MG to the MFP or printer that you want to share to your network. 3. Use a RJ-45 cable to connect the FPS-1010M / FPS-1010MG to your LAN or WAN. 4. Connect the bundled power adapter to FPS-1010M / FPS-1010MG. The MFP Server will perform the Power-On-Self
Inhaltszusammenfassung zur Seite Nr. 8
3. The “MFP Server Utilities - InstallShiled Wizard” is displayed, click "Next". 4. Click “Next” to install the MFP Server utilities in the default folder or click “Change” to specify the destination folder where you would like to install the MFP Server utilities. 3
Inhaltszusammenfassung zur Seite Nr. 9
5. The system starts installing the MFP Server Utilities. 6. The “MFP Server Configuration” screen is displayed. If you want to configure the MFP Server, please select “Yes, I want to configure the MFP Server now.” and click “Next”. Then refer to the following steps to configure your MFP server. Or you can select “No, I will configure the MFP Server later” and click “Next” to complete the installation. 4
Inhaltszusammenfassung zur Seite Nr. 10
7. The MFP Server List will auto search the MFP Servers in the network. Select the MFP Server you want to setup and click “Next” to continue. 8. Enter the “User Name” and “Password” of the MFP Server you have selected to login the MFP Server. The default “User Name” and “Password” is “admin”. Click “OK”. 5
Inhaltszusammenfassung zur Seite Nr. 11
9. Set the “Alias Name” and the “MFP Server Description” to the MFP Server here. Click “Next”. NOTE: You can define the location or other information of the MFP Server for easy to find the MFP by filling “MFP Server Description”. 10. Please set the network settings for the FPS-1010M / FPS-1010MG manually. The default network value is as below: IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 If you have selected “DHCP”, the FPS-1010M / FPS-1010MG will try to determine your
Inhaltszusammenfassung zur Seite Nr. 12
11. The FPS-1010MG will find available wireless network automatically. You could also press the “Refresh” button to find the available wireless network manually. After refresh procedure, there will show the available wireless networks. Please select the appropriate wireless network that you would like to connect from the list and click “Next” to continue. NOTE: Only FPS-1010MG has the “Wireless Network Settings” window. 12. If you choose to connect to an encrypted wireless network, t
Inhaltszusammenfassung zur Seite Nr. 13
13. The configurations are finished. Please click “Finish” to apply new settings. NOTE: Only FPS-1010MG shows the wireless mode, SSID, channel and security information. 14. Select “Yes, I want to restart my computer now” and click “Finish” to complete the installation. 8
Inhaltszusammenfassung zur Seite Nr. 14
15. The “MFP Manager” will display on your screen automatically that after you install management software finish and your computer get into Windows XP first time. Choose “Yes” that enable “MFP Manager” utility automatically when Windows starts. 3.3 Install the MFP Drivers/Utilities 1. When the installation is completed, the “MFP Server Control Manager” will pop up. It will automatically find the MFP Servers and the connected MFP and show it in the “MFP Server List”. To start install
Inhaltszusammenfassung zur Seite Nr. 15
3. The following message is displayed to warn you that you have to follow the installation instructions in the manual of the MFP. If the MFP is requiring you to connect the MFP to your computer directly, please click “Connect”. NOTE: Some MFP requires users to install the drivers/utilities before connecting the MFP to your computer, please make sure you have followed the instructions of MFP. When the MFP requires checking if you have connected the USB cable to MFP and your computer, please
Inhaltszusammenfassung zur Seite Nr. 16
5. Before creating the connection, you have to install two kinds of drivers: the drivers for MFP Server and the drivers for MFP. Please click “Next” to start the installation. 6. When you are installing the MFP Server Drivers, the following message will be displayed to notify you. When the MFP Server drivers are all installed, the message will be disappeared automatically. 11
Inhaltszusammenfassung zur Seite Nr. 17
7. Select “Install the software automatically (Recommended)” to auto install the “MFP Server Enhanced Controller” driver, and then click “Next”. 8. The driver will be installed automatically. Click “Finish” to complete this driver installation. 12
Inhaltszusammenfassung zur Seite Nr. 18
9. The following message is displayed to remind you that you are now installing the MFP Drivers. When you are sure that the MFP has been connected to MFP Server and the MFP driver CD is inserting to your CD-ROM completely, please click “Finish”. 10. Windows will start install the MFP. Please refer to your MFP manual and follow the steps to install MFP driver and utility. 13
Inhaltszusammenfassung zur Seite Nr. 19
4. Using the MFP After you have followed the install wizard to finish the MFP installation, the MFP is now connected to your computer. You can start sharing print, scan, fax and card reader functions provided on the MFP. NOTE: If you have finished using the MFP, please click “Disconnect” to release the MFP from your PC. When there is a user using or connecting MFP, the other users can’t use the MFP until the MFP is released. You may refer to MFP Server manual to setup the disconnect time
Inhaltszusammenfassung zur Seite Nr. 20
4.2 Share Scanner Most of the MFP provides scan utility for users. You can scan pictures or documents through the utility. In Windows XP, user can also scan from Windows XP scanning utility. An example: HP 5600 Series Utilities Windows XP Scanning Utility 15
