Inhaltszusammenfassung zur Seite Nr. 1
User’s Guide
General Description
MW-140BT
Operating Procedures
Appendix, etc. Mobile Printer
! Before using this printer, be sure to read this User’s Guide.
! We suggest that you keep this manual in a handy place for future
reference.
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Introduction Thank you for purchasing the MPrint MW-140BT (hereafter referred to as “the printer”). This monochrome thermal mobile printer is ultra-portable and can be connected to a Pocket PC (PDA running Pocket PC) or a computer to make quick printouts. This User’s Guide contains operating precautions and instruc- tions. Before using this printer, be sure to read this manual for information on its correct operation. In addition, we suggest that you keep this manual in a handy
Inhaltszusammenfassung zur Seite Nr. 4
!This products bearing the CE marking comply with the R&TTE Directive (1995/5/EC), EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) isued by the Commission of the European Community. ! The contents of this manual are subject to change without notice. ! The contents of this manual may not be duplicated or repro- duced, partially or in full, without permission. ! Please note that we assume no responsibility for damages arising from earthquakes, fire, other disasters, actions o
Inhaltszusammenfassung zur Seite Nr. 5
Precautions Precautions Precautions indicated as shown below contain important safety information and should be strictly observed. If the printer malfunctions, immediately stop using it, and then contact the sales representative where it was purchased. The meanings for marks used in this manual are described below. Failure to observe instructions marked with this symbol may result in death or serious injuries. Warning Failure to observe instructions marked with this symbol may result in inju
Inhaltszusammenfassung zur Seite Nr. 6
Indicates an action that must be performed Indicates that the power supply cord must be unplugged from the electrical outlet iv
Inhaltszusammenfassung zur Seite Nr. 7
Precautions Concerning this printer (including the built-in lith- ium ion battery) Warning ! Do not use this printer wherever it is prohibited, for exam- ple, on an airplane, otherwise it may affect equipment, resulting in an accident. ! If this printer is to be used in special environments, for example, near medical equipment, make sure in advance that there would be no harmful effects from electromag- netic waves. Please note that we assume no responsibility for injuries resulting from interf
Inhaltszusammenfassung zur Seite Nr. 8
Warning ! Liquid leaking from the printer may indicate that the built-in battery is damaged. Immediately move the printer away from flames, otherwise a fire may result. In addition, do not touch the leaking liquid. This liquid may damage your eyes or skin if brought in contact with them. If the liquid makes contact with your eyes, immediately rinse them with water and consult a medical professional. If the liquid makes contact with your skin or clothing, immediately rinse them with water. ! Do
Inhaltszusammenfassung zur Seite Nr. 9
Precautions Warning ! If the printer is not fully charged after the specified amount of time has passed, stop charging it, otherwise fire, electric shock or damage may result. Caution ! Keep the printer out of the reach of children, particularly infants, otherwise injuries may result. ! Stop operating the printer if it leaks or becomes discolored, deformed or otherwise defective. Others ! The built-in lithium ion battery is slightly charged so that the operation of the printer can be verified;
Inhaltszusammenfassung zur Seite Nr. 10
Concerning the AC adapter Warning Only use the AC adapter designed specifically for this ! printer, otherwise fire, electric shock or damage may result. ! Do not plug the printer into an electrical outlet other than a household outlet (AC 220 V – 240 V), otherwise fire, elec- tric shock or damage may result. ! Do not touch the AC adapter or the power supply plug with wet hands, otherwise electric shock may occur. Do not try to disassemble, alter or repair the AC adapter, ! otherwise fire, elect
Inhaltszusammenfassung zur Seite Nr. 11
Precautions Warning ! When unplugging the power supply cord, do not pull on the cord, otherwise fire or electric shock may result. ! Do not insert foreign objects into the terminals of the AC adapter, otherwise burns or electric shock may result. ! Incorrectly using the AC adapter may result in fire or electric shock. Therefore, observe the following precau- tions. ! Do not damage it. ! Do not place objects on it. ! Do not modify it. ! Do not subject it to heat. ! Do not twist it. ! Do not bind
Inhaltszusammenfassung zur Seite Nr. 12
Warning ! If the printer is not to be used for a long period of time, be sure to unplug the AC adapter from the unit and the electri- cal outlet for safety reasons. ! Do not wind the AC adapter cable around the adapter or bend the cable, otherwise the cable may be damaged. x
Inhaltszusammenfassung zur Seite Nr. 13
Precautions Operating precautions " Operate this printer in an environment that meets the follow- ing requirements. ! Temperature: 0 – 40 °C ! Humidity: 20 – 80 % (Maximum wet-bulb temperature: 27 °C) ! Do not operate or store this printer in a location exposed to extremely high or extremely low temperatures, extreme humidity, extreme dust, or extreme vibrations, otherwise the printer may be damaged or malfunction. ! Do not use the printer in a location exposed to extreme tem- perature fluctu
Inhaltszusammenfassung zur Seite Nr. 14
" Concerning the paper cassette and the handling of the paper ! Store the paper cassette away from extremely hot, extremely humid or extremely dusty locations and out of direct sunlight, otherwise the paper may become discol- ored or a malfunction may result. ! Be sure to close the lid of the paper cassette before storing it, otherwise the paper may become discolored. ! Do not leave paper cassettes in a closed car under a hot sun, otherwise they may become discolored. ! After opening the pac
Inhaltszusammenfassung zur Seite Nr. 15
Precautions ! Depending on the environmental conditions of the location and the quality of the material that the adhesive-backed paper is attached to, the adhesive-backed paper may become discolored, peel off, be difficult to remove, leave adhesive behind or damage the surface that it was affixed to. Before using the adhesive-backed paper, test it by affix- ing a small piece to an inconspicuous area of the intended surface. ! Do not affix the adhesive-backed paper to people, animals or pl
Inhaltszusammenfassung zur Seite Nr. 16
xiv
Inhaltszusammenfassung zur Seite Nr. 17
CONTENTS CONTENTS Introduction ..........................................................i Precautions ......................................................... iii Operating precautions .............................................. xi CONTENTS ........................................................... 1 1 General Description ........................................ 2 2 Operating Procedures .................................... 3 Charging ........................................................
Inhaltszusammenfassung zur Seite Nr. 18
1 General Description Right side Paper check window Paper cassette cover Paper output slot Left side Status indicator light Charging indicator light Power button Bluetooth switch USB port AC adapter connector 2
Inhaltszusammenfassung zur Seite Nr. 19
Operating Procedures 2 Operating Procedures Charging This printer is equipped with a built-in lithium ion battery. Use the AC adapter designed specifically for this printer to charge the battery. After purchasing this printer, be sure to charge the battery fully before using it. 1 Plug the AC adapter cable into the AC adapter connector on the printer. 2 Plug the AC adapter plug into a household electri- cal outlet (AC 220 V – 240 V). Charging of the built-in lithium ion battery automatic
Inhaltszusammenfassung zur Seite Nr. 20
• In order to protect the circuitry, the battery cannot be charged if the unit is in a location exposed to extremely high or extremely low temperatures. • Do not wind the AC adapter cable around the adapter or bend the cable, otherwise the cable may be dam- aged. • It takes approximately three hours for the battery to be recharged from completely empty to fully charged (with the printer turned off). 4
