Inhaltszusammenfassung zur Seite Nr. 1
MX766/MW767/MX822ST
Digital Projector
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Table of contents Personalizing the projector menu Important safety display........................................................ 46 instructions ................... 3 Select the lamp saver mode.................47 Use Teaching Template......................... 48 Introduction.................. 7 Controlling the projector through a LAN Projector features.....................................7 environment............................................. 49 Shipping contents........................
Inhaltszusammenfassung zur Seite Nr. 3
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 4. Always open the lens shutter or you operate your projector. Save remove the lens cap when the it for future reference. projector lamp is on. 5. In
Inhaltszusammenfassung zur Seite Nr. 4
Safety Instructions (Continued) 7. The lamp becomes extremely hot 10. Do not place this product on an during operation. Allow the unstable cart, stand, or table. The projector to cool for approximately product may fall, sustaining serious 45 minutes prior to removing the damage. lamp assembly for replacement. 11. Do not attempt to disassemble this 8. Do not operate lamps beyond the projector. There are dangerous high rated lamp life. Excessive operation voltages inside which may cause
Inhaltszusammenfassung zur Seite Nr. 5
Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. - Do not place this projector on a blanket, the following environments. bedding or any other soft surface. - Space that is poorly ventilated or - Do not cover this projector with a cloth confined. Allow at least 50 cm clearance from walls and free flow of air around or any other item. the projector. - Do not place inflammables near the projector. - Locations where tempera
Inhaltszusammenfassung zur Seite Nr. 6
Safety Instructions (Continued) 16. Do not stand the projector on end 18. Do not place liquids near or on the vertically. Doing so may cause the projector. Liquids spilled into the projector to fall over, causing injury or projector may cause it to fail. If the resulting in damage to the projector. projector does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Projector features This model is one of the best projectors available in the world. You can enjoy the best video quality across various devices such as PC, laptop, DVD and VCR even document camera to bring all possibility to life. The projector offers the following features. • SmartEco™ starts your dynamic power saving • LAN display for network control and web server • LAN display 4-1 (maximum 4PC/ NB display to 1 projector) • Remote desktop feature for LAN and USB display 1-M (ma
Inhaltszusammenfassung zur Seite Nr. 8
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. MX766/MW767 projector MX822ST projector Remote control with batteries Power cord (2.9m for MX822ST)
Inhaltszusammenfassung zur Seite Nr. 9
Optional accessories 1. Spare lamp kit 4. PointDraw pen 2. Ceiling mount kit 5. Wall mount kit 3. BenQ wireless dongle 6. Document camera * The PointDraw pen is not sold worldwide. If you would like to purchase it, please contact the regional point of sale. Introduction 9
Inhaltszusammenfassung zur Seite Nr. 10
Projector exterior view 1. External control panel Front/upper side (See "Projector" on page 12 for details.) 2. Lamp cover (MX766/MW767) 3. Focus ring (MX766/MW767) Focus slide lever (MX822ST) 1 4. Projection lens 2 5. Lens cover 6. Vent (heated air exhaust) 7. Speaker 6 8. Zoom slide lever (MX766/MW767) 3 9. Front IR remote sensor 7 4 10. Quick-release button 8 9 5 10 (MX822ST) 1 2 6 4 7 3 9 10 5 10 Introduction
Inhaltszusammenfassung zur Seite Nr. 11
11. Audio output jack Rear/lower side 12. Audio input jack 13. S-Video input jack 14. PD DONGLE IN jack (MX822ST) 15. RGB signal output jack 16. RGB (PC)/Component video (YPbPr/ YCbCr) signal input jack 17. HDMI input jack 18. RS-232 control port 19. USB B type jack MX766/MW767 20. USB A type jack 21. RJ45 LAN input jack 22. Rear IR remote sensor 11 12 1314 15 16 17 18 19 20 21 22 23. Rear adjuster foot 24. USB mini-B type jack 25. Kensington anti-theft lock slot 26. Ceiling mount holes 27. 12
Inhaltszusammenfassung zur Seite Nr. 12
Controls and functions Projector 6. AUTO Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the image" on page 30 for details. 6 I I 1 7. Power/POWER indicator light 7 2 Toggles the projector between standby 3 8 mode and on.See "Starting up the 4 3 projector" on page 29 for details. 5 9 Lights up or flashes when the projector is 2 10 under operation. See "Indicators" on page 96 for detail. 1. MENU/EXIT 8. TEMPerature indicator light Turns on the
Inhaltszusammenfassung zur Seite Nr. 13
Mounting the projector We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling or wall, we strongly recommend that you use a proper fitting BenQ projector ceiling mount kit or wall mount kit and that you ensure it is securely and safely installed. If you use a non-BenQ brand projector mounting kit, there is a safety risk
Inhaltszusammenfassung zur Seite Nr. 14
Remote control 6. Volume /Arrow keys ( / Left, 14 / Right) 1 15 Adjusts the sound level. 2 16 When the On-Screen Display (OSD) 3 17 menu is activated, the #5, and #6 keys 4 18 are used as directional arrows to select 5 the desired menu items and to make 6 6 adjusents. See "Using the menus" on 7 19 8 page 33 for details. 20 5 7. MODE/ENTER 9 Selects an available picture setup 21 10 mode. See "Selecting a picture mode" on 11 22 page 39 for details. 23 12 Activates the selected On-Screen 24
Inhaltszusammenfassung zur Seite Nr. 15
15. VIDEO 23. ASPECT Displays vidoe signal. Selects the display aspect ratio. See 16. HDMI "Selecting the aspect ratio" on page 38 for details. Displays HDMI signal. 24. SmartEco 17. NETWORK Enables the network mode. Displays the lamp mode selection 18. AUTO bar(Normal/Economic/SmartEco). Automatically determines the best picture Operating the laser pointer timings for the displayed image. See The Laser Pointer is a "Auto-adjusting the image" on page 30 for presentation aid for professiona
Inhaltszusammenfassung zur Seite Nr. 16
Approx. 22.5° Approx. 22.5° Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 22.5 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. • Operati
Inhaltszusammenfassung zur Seite Nr. 17
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the
Inhaltszusammenfassung zur Seite Nr. 18
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. The projector should always be placed horizontally level (like flat on a table), and positioned directly perpendicular (90° right-angle square) to the horizontal center of the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces). If the projector is mo
Inhaltszusammenfassung zur Seite Nr. 19
Projection dimensions Refer to "Dimensions" on page 97 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance MX766 Screen size Distance from screen (m) Vertical offset Diagonal W H Min length Max length (cm) Average Inch cm (cm) (cm) (max. zoom) (min. zoom) 30 76 61 46 1.09 1.39 1.69 6.9 40 102 81 61 1.47 1.87 2.27 9.1 60 152 122 91 2.23 2.83 3.43 13.7 80 203 163 122 2
Inhaltszusammenfassung zur Seite Nr. 20
MX822ST Screen size Vertical offset Diagonal W H Distance from screen (m) (cm) Inch cm (cm) (cm) 30 76 61 46 0.38 7 40 102 81 61 0.51 9 60 152 122 91 0.76 14 80 203 163 122 1.02 18 100 254 203 152 1.27 23 120 305 244 183 1.53 27 150 381 305 229 1.91 34 200 508 406 305 2.55 46 250 635 508 381 3.18 57 300 762 610 457 3.82 69 For example, if you are using a 120-inch screen, the average projection distance is 1.53 m and with a vertical offset of 27 cm. If your measured projection distance is 2.0
